SMARTEH LPC-2.DX1 Longo Mai Kula da Shirye-shiryen

Ƙayyadaddun bayanai

• Sunan samfur: Longo Programmable Controller LPC-2.DX1 Module Relay
• Shafin: 2
• Marubucin: SMARTEH doo
• Mai aiki Voltage: 100 - 240 V AC
• Fitarwa: Relay dijital fitarwa tare da yin lambobi (NO)
• Fasaloli: Inrush kariya na yanzu, galvanic keɓe fitarwa, LED siginar nuna alama, fuse matsayi gane
• Hawa: Standard DIN EN50022-35 dogo hawa

FAQ

Tambaya: Shin za a iya amfani da tsarin LPC-2.DX1 tare da nau'ikan inductive da capacitive?

A: Ee, tsarin LPC-2.DX1 ya dace don amfani tare da duka nau'ikan inductive da capacitive kamar masu haskakawa, masu kwangila, da injina.

Q: Ta yaya tsarin LPC-2.DX1 ke aiki?

A: Module na LPC-2.DX1 yana aiki daga babban tsarin (misali, LPC-2.MU1, LPC-2.MC9) ta hanyar bas na cikin Dama.

Q: Wani nau'i na hawa baya goyon bayan module LPC-2.DX1?

A: Tsarin LPC-2.DX1 yana goyan bayan daidaitattun DIN EN50022-35 hawan dogo don sauƙi shigarwa.

SMARTEH doo ne ya rubuta
Haƙƙin mallaka © 2024, SMARTEH doo
Manual mai amfani
Sigar fayil: 2
Mayu, 2024

GARGADI

• MATSAYI DA ARZIKI: Ma'auni, shawarwari, ƙa'idoji da tanadi na ƙasar da na'urorin za su yi aiki, dole ne a yi la'akari da su yayin tsarawa da kafa na'urorin lantarki. Yi aiki akan 100 .. 240 V AC cibiyar sadarwa an ba da izini ga ma'aikata masu izini kawai.
• GARGAƊI MAI HADARI: Na'urori ko kayayyaki dole ne a kiyaye su daga danshi, datti da lalacewa yayin jigilar kaya, adanawa da aiki.
• SHARUDAN GARANTI: Don duk nau'ikan LONGO LPC-2 - idan ba a yi gyare-gyare ba kuma an haɗa su daidai ta hanyar ma'aikata masu izini - la'akari da iyakar ikon haɗin haɗin da aka yarda, garanti na watanni 24 yana aiki daga ranar sayarwa zuwa mai siye na ƙarshe, amma bai wuce watanni 36 ba bayan bayarwa daga Smarteh. Idan akwai da'awar a cikin lokacin garanti, waɗanda suka dogara da lalacewar kayan aiki mai ƙira yana ba da canji kyauta. Hanyar dawo da ma'auni mara aiki, tare da bayanin, ana iya shirya tare da wakilin mu mai izini. Garanti baya haɗawa da lalacewa ta hanyar sufuri ko saboda ƙa'idodin da ba a yi la'akari da su ba na ƙasar, inda aka shigar da tsarin.
• Dole ne a haɗa wannan na'urar da kyau ta tsarin haɗin da aka bayar a cikin wannan jagorar. Rashin haɗin kai na iya haifar da lalacewar na'urar, wuta ko rauni na mutum.
• Hadari voltage a cikin na'urar na iya haifar da girgiza wutar lantarki kuma yana iya haifar da rauni ko mutuwa.
• KADA KA KADA KA YIWA WANNAN KYAMAR HIDIMAR!
• Kada a shigar da wannan na'urar a cikin tsarin da ke da mahimmanci ga rayuwa (misali na'urorin likitanci, jiragen sama, da sauransu).
• Idan an yi amfani da na'urar ta hanyar da masana'anta ba ta ayyana ba, ƙimar kariyar da kayan aikin ke bayarwa na iya lalacewa.
• Sharar gida da kayan lantarki (WEEE) dole ne a tattara su daban!
• LONGO LPC-2 ya bi ka'idodi masu zuwa:
  • EMC: EN 61000-6-3: 2007 + A1: 2011, EN 61000-6-1: 2007, EN 61000- 3- 2: 2006
  • LVD: IEC 61010-1: 2010 (Ed. na uku), IEC 3-61010-2: 201 (Ed na farko)
• Smarteh doo yana aiki da manufofin ci gaba da ci gaba. Don haka mun tanadi haƙƙin yin canje-canje da haɓakawa ga kowane samfuran da aka siffanta a cikin wannan jagorar ba tare da wani sanarwa na farko ba.

MULKI:
SMARTEH doo
Poljubinj 114
5220 Tolmin
Slovenia

GASKIYA

• DC Kai tsaye Yanzu
• AC Madadin Yanzu
• RX Karba
• TX watsa
• UART Mai Rarraba-Mai Rarraba Asynchronous Na Duniya
• A'A Kullum Buɗewa
• PLC Mai Sarrafa Dabarun Shirye-shiryen

BAYANI

LPC-2.DX1 ne mai gudun ba da sanda fitarwa module tare da inrush halin yanzu kariya da galvanic ware fitarwa. Ana iya amfani da shi a cikin aiki mai yawa. Ya dace a yi amfani da shi tare da inductive ko capacitive lodi (misali reflectors, yan kwangila, Motors).
LED yana nuna sigina mai aiki a halin yanzu akan fitarwa na module da matsayin fiusi.
Ana sarrafa LPC-2.DX1 kuma ana sarrafa shi daga babban tsarin (misali LPC-2.MU1, LPC-2.MC9, …) ta bas na ciki Dama.

SIFFOFI

Table 1: Bayanan fasaha

• Relay dijital fitarwa tare da yin lambobi (NO), inrush halin yanzu iyakance, galvanic keɓe
• Siginar LED
• Gano fis ɗin da aka busa
• An kawo daga babban module
• Ƙananan girma da daidaitattun DIN EN50022-35 hawan dogo

AIKI

• LPC-2.DX1 module za a iya sarrafawa daga babban PLC module (misali LPC-2.MC9, LPC-2.MM1). Ana iya karantawa ko rubuta sigogin ƙirar ta hanyar software na Smarteh IDE.
• LPC-2.DX1 module kuma za a iya sarrafa shi ta babban abin shigar da shigarwa na nesa (misali LPC-2.MU1).
• GARGADI: Bayan kunna fitarwa, halin yanzu yana gudana ta hanyar thermistor NTC, yana iyakance inrush halin yanzu. Sakamakon haka, NTC thermistor yana zafi yayin kunna fitarwa. Don tabbatar da ingantaccen aiki, lokaci tsakanin zagayowar fitarwa dole ne ya isa don ba da damar thermistor na NTC ya kwantar da hankali gaba ɗaya.
• Ƙayyadaddun ƙayyadaddun ƙayyadaddun lokaci na software tsakanin kashewa da sake kunnawa an saita zuwa 20 seconds. Koyaya, wannan ƙimar ƙarshen lokacin ba a yi niyya ta zama iyakar iyaka ba. Yana aiki azaman tunatarwa don yin la'akari da buƙatun sanyaya na NTC thermistor lokacin zayyana tsarin aikin aikace-aikacen ku.
• Koma zuwa jadawali lokacin da aka haɗa don wakilcin gani na fitarwa ON jinkiri (toff) bayan ƙarfin na'urar da jinkirin ON (toff) tsakanin zagayowar fitarwa.
• Idan yanayin zafin da aka auna ta hanyar aunawa NTC thermistor ya wuce 80°C, za a kashe fitarwar.

Hoto 2: Fitar ON-jinkiri

SmartehIDE Parameters

Shigarwa

Zazzabi na ciki [DX1_x_ai_internal_temp]: Auna zafin ciki akan PCB.

Nau'in: UNINT

Raw zuwa bayanan injiniya: 0 .. 65535 → 0 .. 655.35 °C

Halin fiɗa [DX1_x di_fuse_status]: Fuse matsayin shigarwar dijital.

Nau'in: BOOL

• 0 → Fuskar busa
• 1 → Fuse Ok

Fitowa

Relay dijital fitarwa [DX1_x_do_out]: Relay dijital matsayin fitarwa.

Nau'in: BOOL

Raw zuwa bayanan injiniya:

• 0 → KASHE fitarwa na dijital
• 1 → Fitowar Dijital ON

SHIGA

Tsarin haɗin gwiwa

Hoto 3: Tsarin haɗi

Table 2: IN

IN.3	L	Shigar da wutar lantarki - layi, 100 .. 240 V AC, 50/60 Hz
IN.4	N	Shigar da wutar lantarki - tsaka tsaki, 100 .. 240 V AC, 50/60 Hz
Table 3: FITA
FITA.1	L1	Fitar da wutar lantarki - layi, 100 .. 240 V AC, 50/60 Hz
FITA.2	N1	Fitar da wutar lantarki - tsaka tsaki, 100 .. 240 V AC, 50/60 Hz
Table 4: Fuse
Fuse	4A (T-slow)	Harsashi fuse 5 × 20 mm
Table 5: LED
LED: kore	Matsayin LED	ON: Fitowa ya kunna kuma yana kunna fitarwa KASHE: Fitarwa yana kashe kuma babu wuta akan fitarwa Kiftawa: Babu wuta akan fitarwa, fuse busa ko babu voltage na shigar

Shafin 6: K1
BUS na ciki	Data & DC samar da wutar lantarki	Haɗi zuwa I/O module
Shafin 7: K2
BUS na ciki	Data & DC samar da wutar lantarki	Haɗi zuwa I/O module

umarnin hawa

Hoto na 4: Girman gidaje

Girma a cikin millimeters.

Dole ne a yi duk haɗin haɗin kai, abubuwan haɗe-haɗe da haɗawa yayin da module ɗin ba a haɗa su da babban wutar lantarki ba.

Umarnin hawa:

1. Kashe babban wutar lantarki.
2. Dutsen LPC-2.DX1 module zuwa wurin da aka bayar a cikin rukunin lantarki (DIN EN50022-35 hawan dogo).
3. Hana wasu kayayyaki na LPC-2 (idan an buƙata). Haša kowane nau'i zuwa dogo na DIN da farko, sannan ku haɗa kayayyaki tare ta hanyar haɗin K1 da K2.
4. Haɗa shigarwar shigarwa da wayoyi masu fitarwa bisa ga tsarin haɗin kai a cikin Hoto 2.
5. Kunna babban wutar lantarki.

Sauke a bi da bi. Don hawawa / sauke kayayyaki zuwa / daga DIN dogo dole ne a bar sarari kyauta na aƙalla module ɗaya akan titin DIN.
NOTE: LPC-2 babban module ya kamata a kunna shi daban da sauran kayan lantarki da aka haɗa da tsarin LPC-2. Dole ne a shigar da wayoyi na sigina dabam daga wuta da babban voltage wayoyi daidai da ma'aunin shigarwar lantarki na masana'antu gabaɗaya.

Hoto 5: Mafi ƙarancin izini

Dole ne a yi la'akari da abubuwan da ke sama kafin hawan module.

Hoto 6: Sauya fis

BAYANIN FASAHA

• Samar da wutar lantarki Daga babban tsarin ta bas na ciki
• Max. amfani da wutar lantarki 0.5W
• Ƙididdigar shigarwar voltage 100 .. 240 V AC, 50/60 Hz
• Matsakaicin aiki na yanzu 4 A
• SW-ayyana mafi ƙarancin lokacin KASHE1 20s
• Fuse 4 A (T-slow), 250 V, Cartridge fuse 5 × 20 mm
• Nau'in haɗin haɗin nau'in dunƙule nau'in haɗe-haɗe don igiyar igiya 0.75 zuwa 2.5 mm2
• Girma (L x W x H) 90 x 18 x 60 mm
• Nauyi 70 g
• Yanayin zafin jiki 0 zuwa 50 ° C
• Yanayin yanayi max. 95%, babu condensation
• Matsakaicin tsawo 2000 m
• Matsayin hawa a tsaye
• Sufuri da zafin jiki na ajiya -20 zuwa 60 °C
• Digiri na 2
• Ƙarfafawatagda category II
• Kayan Wutar Lantarki Class II (ruwan rufi biyu)
• Matsayin kariya na IP30

LABARI MULKI

Tambari (sample): ku

XXX-N.ZZZ
P/N: AAABBBCCDDDEEE
S/N: SSS-RR-YYXXXXXXXXX
D/C: WW/YY

Bayanin lakabi:

1. XXX-N.ZZZ - cikakken sunan samfur.
   • XXX-N - Iyalin samfur
   • ZZZ - samfur
2. P/N: AAABBBCCDDDEEE - lambar sashi.
   • AAA - babban lambar don dangin samfur,
   • BBB - gajeren sunan samfurin,
   • CCDDD - lambar jerin,
   • CC - shekara ta bude lambar,
   • DDD - lambar asali,
   • EEE – lambar sigar (an tanadi don haɓaka HW da/ko SW na gaba).
3. S/N: SSS-RR-YYXXXXXXXXX - lambar serial.
   • SSS - gajeren sunan samfurin,
   • RR - lambar mai amfani (hanyar gwaji, misali Smarteh mutum xxx),
   • YY - shekara,
     ◦ XXXXXXXXX - lambar tari na yanzu.
4. D/C: WW/YY - lambar kwanan wata.
   • WW - mako kuma
   • YY - shekarar samarwa.

Na zaɓi

1. MAC
2. Alamomi
3. WAMP
4. Sauran

CANJI

Tebur mai zuwa yana bayyana duk canje-canjen daftarin aiki.

Kwanan wata	V.	Bayani
10.05.24	1	Sigar farko, wanda aka bayar azaman LPC-2.DX1 module UserManual.

Takardu / Albarkatu

SMARTEH LPC-2.DX1 Longo Mai Kula da Shirye-shiryen [pdf] Manual mai amfani LPC-2.DX1 Longo Mai Gudanar da Shirye-shiryen, LPC-2.DX1, Mai Gudanar da Shirye-shiryen Longo, Mai Gudanar da Shirye-shiryen, Mai Gudanarwa

Magana

• Manual mai amfani