SMARTEH LPC-2.VV4 Longo Manual Mai Sarrafa Mai Gudanarwa

Shafin 3

SMARTEH doo / Poljubinj 114 / 5220 Tolmin / Slovenia / Tel.: +386(0) 5 388 44 00 / e-mail: info@smarteh.si / www.smarteh

MATSAYI DA ARZIKI: Ma'auni, shawarwari, ƙa'idoji da tanadi na ƙasar da na'urorin za su yi aiki, dole ne a yi la'akari da su yayin tsarawa da kafa na'urorin lantarki. Yi aiki akan 100 .. 240 V AC cibiyar sadarwa an ba da izini ga ma'aikata masu izini kawai.

GARGAƊI MAI HADARI: Na'urori ko kayayyaki dole ne a kiyaye su daga danshi, datti da lalacewa yayin jigilar kaya, adanawa da aiki. SHARUDAN GARANTI: Don duk nau'ikan LONGO LPC-2 - idan ba a yi gyare-gyare ba kuma an haɗa su daidai ta hanyar ma'aikata masu izini - la'akari da iyakar ikon haɗin haɗin da aka yarda, muna ba da garanti na watanni 24 daga ranar sayarwa zuwa ƙarshen mai siye. Idan akwai da'awar a cikin lokacin garanti, waɗanda suka dogara da lalacewar kayan aiki mai ƙira yana ba da canji kyauta. Hanyar dawo da ma'auni mara aiki, tare da bayanin, ana iya shirya tare da wakilin mu mai izini. Garanti baya haɗawa da lalacewa ta hanyar sufuri ko saboda ƙa'idodin da ba a yi la'akari da su ba na ƙasar, inda aka shigar da tsarin.
Dole ne a haɗa wannan na'urar da kyau ta tsarin haɗin da aka bayar a cikin wannan jagorar. Rashin haɗin kai na iya haifar da lalacewar na'urar, wuta ko rauni na mutum.
Hadari voltage a cikin na'urar na iya haifar da girgiza wutar lantarki kuma yana iya haifar da rauni ko mutuwa.
KADA KA KADA KA YIWA WANNAN KYAMAR HIDIMAR!
Kada a shigar da wannan na'urar a cikin tsarin da ke da mahimmanci ga rayuwa (misali na'urorin likitanci, jiragen sama, da sauransu).
Idan an yi amfani da na'urar ta hanyar da masana'anta ba ta ayyana ba, ƙimar kariyar da kayan aikin ke bayarwa na iya lalacewa.

Sharar gida da kayan lantarki (WEEE) dole ne a tattara su daban!

LONGO LPC-2 ya bi ka'idodi masu zuwa:

• EMC: IEC/EN 61000-6-2, IEC/EN 61000-6-4,
• LVD: IEC 61010-1: 2010 (Bugu na uku), IEC 3-61010-2: 201 (Ed na farko)

MULKI:
SMARTEH doo Poljubinj 114 5220 Tolmin Slovenia

GASKIYA

An jera ta hanyar tsari a cikin takarda:

dp: Delta P, bambancin matsa lamba
VAV: Sauyawan ƙarar iska
I/O: Fitowar shigarwa
NTC: Ƙimar zafin jiki mara kyau
LED: Haske mai fitar da diode
ERR: Kuskure
PWR: Ƙarfi
BA: Akan buɗewa
NC: Akan rufe

BAYANI

LPC-2.VV4 wani nau'in matsa lamba ne daban-daban tare da abubuwa daban-daban da abubuwan da aka haɗa. Module zaɓin zaɓi ne da za a yi amfani da shi a cikin tsarin sarrafa iska kamar VAV da makamantansu.

Tsarin LPC-2.VV4 yana aiki kai tsaye daga babban rukunin LPC-2. Akwai LED guda biyu. Green (PWR) yana nuna kasancewar samar da wutar lantarki, kuma ja (ERR) yana nuna kuskuren module LPC-2.VV4.

SIFFOFI

Hoto 1: LPC-2.VV4 module

Table 1: Features

An yi ƙarfi daga babban rukunin LPC-2
Ma'aunin DeltaP: 0 .. 500 Pa
3 x Voltage analog bayanai: 0 ... 10 V
1 x NTC 10k shigarwa
1 x NTC 10k / voltage shigarwar analog: 0 .. 10 V, mai zaɓin jumper
8 x Abubuwan shigarwa na dijital
1 x Voltage analog fitarwa: 0 ... 10 V
2 x Fitowar Relay, NO
2 x Abubuwan Relay, NO / NC, zaɓaɓɓen jumper
Daidaitaccen DIN EN50022-35 hawan dogo

SHIGA

Tsarin haɗin gwiwa

Hoto 2: Tsarin haɗin gwiwa example

Hoto 3: Tsarin haɗi

* NOTE: Dole ne a ba da kulawa ta musamman idan ana amfani da nau'ikan nau'ikan halayen haɓakawa, misali masu tuntuɓar juna, solenoids, ko lodi waɗanda ke zana igiyoyin ruwa mai ƙarfi, misali ƙarfin hali, ƙarfin wuta l.amps. Nauyin halayen haɓaka yana haifar da wuce gona da iritage spikes a fitarwa relay lambobin sadarwa lokacin da aka kashe su. Ana ba da shawarar yin amfani da da'irori masu dacewa da suka dace.

Nauyin da ke zana manyan igiyoyin ruwa na iya haifar da abin da ake fitarwa na relay ya yi nauyi na ɗan lokaci tare da na yanzu sama da iyakokin da aka yarda da shi, wanda zai iya lalata fitarwar, duk da cewa tsayayyen halin yanzu yana cikin iyakokin da aka yarda. Don irin wannan nau'in nauyin, ana ba da shawarar yin amfani da madaidaicin inrush na yanzu mai iyaka.

Maɗaukaki masu ƙarfi ko masu ƙarfi suna rinjayar lambobin sadarwa ta hanyar rage lokacin rayuwarsu ko kuma suna iya narkar da lambobi tare. Yi la'akari da yin amfani da wani nau'in fitarwa na dijital misali triac.

umarnin hawa

Hoto na 4: Girman gidaje

Girma a cikin millimeters.

CANJIN WAJE KO MAI SAUKI DA KIYAYEN WUTA: An ba da izinin haɗa naúrar zuwa shigarwa tare da kariya ta yanzu wacce ke da ƙimar ƙima ta 16 A ko ƙasa da haka.

SHAWARWARI AKAN SAUKI KO KARIN CIKI: Ya kamata a sami babban maɓalli guda biyu a cikin shigarwa don kashe naúrar. Canjin ya kamata ya dace da buƙatun daidaitaccen IEC60947 kuma yana da ƙima mai ƙima aƙalla 6 A. Maɓalli ko mai watsewa ya kamata ya kasance cikin sauƙin isar mai aiki. Ya kamata a yi masa alama azaman na'urar cire haɗin kayan aiki.

Dole ne a yi duk haɗin haɗin kai, abubuwan haɗe-haɗe da haɗawa yayin da module ɗin ba a haɗa su da babban wutar lantarki ba.

Dole ne a shigar da na'urorin a cikin shinge ba tare da buɗewa ba. Dole ne ƙulla ya ba da kariya ta lantarki da wuta Dole ne ya yi tsayayya da gwaji mai ƙarfi tare da 500 g karfe Sphere daga nesa shine 1.3 m da kuma gwajin a tsaye 30 N. Lokacin shigar da shi a cikin yadi, mai izini kawai zai iya samun maɓalli don buɗe shi.

Umarnin hawa:

1. Kashe babban wutar lantarki.
2. Dutsen LPC-2.VV4 module zuwa wurin da aka bayar a cikin rukunin lantarki (DIN EN50022-35 hawan dogo).
3. Hana sauran kayayyaki. Haša kowane nau'i zuwa dogo na DIN da farko, sannan ku haɗa kayayyaki tare ta hanyar haɗin K1 da K2.
4. Haɗa wayoyi zuwa masu haɗawa bisa ga tsarin haɗin gwiwa. Shawarwari/Mafi girman ƙarfin ƙarfi shine 0.5/0.6 Nm (4.42/5.31 lbf in)
5. Haɗa wayoyi masu samar da wutar lantarki zuwa mai haɗawa bisa ga tsarin haɗin. Shawarwari/Mafi girman ƙarfin ƙarfi shine 0.5 / 0.6 Nm (4.42/5.31 lbf in)
6. Kunna babban wutar lantarki.
7. Power (PWR) koren LED yakamata ya kunna. Red LED (ERR) yakamata ya kashe.

Sauke a bi da bi. Don hawawa / sauke kayayyaki zuwa / daga DIN dogo dole ne a bar sarari kyauta na aƙalla module ɗaya akan titin DIN. Za a haɗa na'urar cire haɗin kai a cikin wayoyi na filin.

NOTE: Dole ne a shigar da wayoyi na sigina daban daga wuta da babban voltage wayoyi daidai da ma'aunin shigarwar lantarki na masana'antu gabaɗaya.

Hoto 5: Mafi ƙarancin izini

Dole ne a yi la'akari da sharewar kafin hawan module.

Alamar ƙirar ƙira

Hoto 6: Lakabi

Tambari (sample): ku

Bayanin lakabi:

1. XXX-N.ZZZ – cikakken sunan samfurin.
   ◦ XXX-N – Samfur iyali
   ◦ ZZZ - samfur
2. P/N: AAABBBCCDDDEEE - lambar sashi.
   ▪ AAA - janar code don iyali samfurin,
   ▪ BBB - gajeren sunan samfurin,
   ▪ CCDDD - code jerin,
   • CC - shekara ta bude code,
   • DDD - rikodin rikodin,
   ▪ EEE - lambar sigar (ajiye don haɓaka HW da/ko SW na gaba).
3. S/N: SSS-RR-YYXXXXXXXXX – serial number.
   ◦ SSS - gajeren sunan samfurin,
   ◦ RR - lambar mai amfani (hanyar gwaji, misali Smarteh mutum xxx),
   ◦ YY - shekara,
   ◦ XXXXXXX– lambar tari na yanzu.
4. D/C: WW/YY – kwanan wata code.
   • WW - mako kuma
   • YY - shekarar samarwa.

Na zaɓi

1. MAC
2. Alamomi
3. WAMP
4. Sauran

BAYANIN FASAHA

Tebur 9: Bayanan fasaha

Table 10: Analog IN/OUT Ƙayyadaddun fasaha

Table 11: Digital IN/OUT Ƙayyadaddun fasaha

SAURAN SAUKI

Don yin odar kayayyakin gyara ana amfani da Lambobin Sashe masu zuwa:

CANJI

Tebur mai zuwa yana bayyana duk canje-canjen daftarin aiki.

Takardu / Albarkatu

SMARTEH LPC-2.VV4 Longo Mai Gudanar da Shirye-shiryen [pdf] Manual mai amfani LPC-2.VV4 Longo Mai Gudanar da Shirye-shiryen, LPC-2.VV4, Longo Programmable Controller, Mai Shirye Shirye, Mai Sarrafa

Magana

• Manual mai amfani