SMARTRISE C4 Taimakon Jagorar Mai Amfani Mai Kula da Elevator

MAYAR DA HUKUNCI

Maye gurbin Alloli.

Shigar da Sabon allo

Idan daya daga cikin allunan ya zama na inji ko na lantarki, ana buƙatar allo mai maye gurbin. Za'a iya riƙe sigogin saiti (masu ƙidayar lokaci, bene da aka koya, da sauransu) bayan an maye gurbin allo.

Rike Ma'auni don Kwamitin MR da aka Maye gurbin
Hanya mai zuwa tana bayyana yadda ake canja wurin sigogi daga allon CT zuwa allon MR da aka maye gurbinsu.

1. Kashe wuta ga mai sarrafawa.
2. Shigar da maye gurbin hukumar MR SRU kuma sake haɗa tashoshi masu haɗawa.
3. Kunna DIP 5B da DIP 7A.
4. Ƙaddamar da Controller.
5. A kunna wuta, allon MR yana nuna SYNC IN CIGABA (motar ba za ta yi aiki ba).
6. Lokacin da aka gama, ana nuna SYNC COMPLETE.
7. Kashe mai sarrafawa.
8. Kashe DIP 5B.
9. Kunna mai kula da motar kuma motar ta ci gaba da aiki.

Rike Ma'auni don Maɓallin CT ko Kwamitin COP
Hanya mai zuwa tana bayyana yadda ake canja wurin sigogi daga allon MR zuwa allon CT ko COP da aka maye gurbinsu.

1. Cire wuta daga mai sarrafawa.
2. Cire haɗin haɗin haɗin kuma cire allon CT ko COP.
3.  Shigar da maye gurbin allon CT ko COP kuma sake haɗa tashoshi masu haɗawa.
   NOTE: Tabbatar cewa duk maɓallan DIP daidai ne.
4. Juya canjin CT/COP zuwa ko dai CT ko COP da ake musanya.
5. NOTE: Canjin yana kan kusurwar dama ta sama na allo.
6. Cire LOTO kuma yi amfani da wuta ga mai sarrafawa.
7. Tsarin Aiki tare yana farawa ta atomatik saboda ƙididdige ƙididdiga wanda akai-akai kwatanta sigogi tsakanin alluna uku.
   NOTE: Babu SYN IN CIGABA da aka nuna.
8. Lokacin da aka gama, allon CT/COP yana aiki na yau da kullun tare da kiyaye duk sigogi.

2023 © Smartrise Engineering, Inc. Duk haƙƙin mallaka