STROMER ST1 Umarni

Bayanan Bayani na ST1

ST1 GASKIYA

Idan wadannan kurakurai da alamun bayyanar sun taso, ana maye gurbin abin da ya dace kai tsaye.

MOTOR

• Ana nuna matsalolin mota masu zuwa akan nunin a matsayin kuskure: ICCURR, HEAT, OVERHEAT, HALL, CURR, Faceless, BRAKE, Toshe, da TMM (ba tare da hawan keke ba)
• Alamomin da ke biyowa suna nuna cewa kuskuren fasaha ya faru a cikin motar: Motar yana raguwa yayin tafiya, motar tana haifar da hayaniya, makullin mota.

NUNA

• Don kurakuran nuni, maye gurbin nuni da ɗaya a cikin sabuwar sigar
• A halin yanzu, sabuwar sigar ita ce 0.88 (Yi amfani da lambar 2000 lokacin neman wannan sigar)
• Nuni mai karye clamps ana maye gurbinsu daban-daban

BAYAN COGS

• Don kurakurai masu zuwa, muna ba da shawarar maye gurbin cogs na baya: gears ba su da kyau kuma ana samar da ƙararrawa.

CHARGER

• An maye gurbin caja gaba ɗaya saboda kuskure masu zuwa:
• Caja baya caji (fus yayi kyau)
• Fannonin samun iska baya aiki ko hayaniya
• Ba za a iya kunna caja ba (LEDs akan cajar ba sa kunnawa)

KUSKURE NO_COM/NO_BATT (NA KYAU AKAN NUNA):

1. Duba baturin tare da voltmeter. Idan baturi voltage shine 32 V ko fiye, ci gaba zuwa Mataki na 2.
2. Idan baturi voltage kasa da 32 V, baturin yana da zurfi sosai.
   
3. Ware igiyoyin wutar lantarki a ƙarƙashin ginshiƙi na hagu kuma duba volt na baturitage a fil ɗin da aka nuna a cikin hoton. Idan voltage samu ya yarda da baturin voltage kuma nunin ya ci gaba da nuna NO_COM/NO_BATT, ci gaba zuwa Mataki na 3.
   
4. Idan voltage samu bai kai batir voltage (+/- 1 V bambanci), cire murfin baturin kuma duba haɗin. Idan bambancin ya kasance, duba voltage kai tsaye a kebul na wicket. Amfani da voltage samu a kebul na wicket, gano ko kebul na wutar lantarki ko kebul na wicket yana buƙatar maye gurbinsa.
5. Ware kebul na firikwensin TMM a ƙarƙashin chainstay na hagu (kebul-pole 3). Idan saƙon kuskuren NOLCOM/NO_BATT ya ɓace daga nunin, maye gurbin firikwensin TMM da kebul ɗin sa.
6. Haɗa nuni mai aiki kai tsaye zuwa motar.
   Idan har yanzu saƙon kuskure yana nunawa, dole ne a maye gurbin motar (ci gaba a mataki na 5). Idan saƙon kuskure ya ɓace, haɗa nunin da ke kan sandar hannu zuwa kebul ɗin nuni. Idan saƙon kuskure ya ɓace, dole ne a maye gurbin nunin. Idan har yanzu saƙon kuskure yana nan, kebul ɗin nuni yayi kuskure
7. Laifin zai iya ƙunsar zuwa ga motar.

SOC-AUNA

Bincika Tsarin Gudanar da Baturi don kuskuren da overvol ya haifartage kamar haka.

1. Dole ne a kunna BMS kafin a duba siginar SOC (State Of Charge). (Ta hanyar ba da ƙarin cajin baturi na kimanin daƙiƙa 10 ko sanya shi a cikin Stromer).
2. Auna voltage na siginar SOC (tashar mara kyau <=> SOC fil) ta amfani da voltmeter. Kwatanta darajar da aka samu tare da teburin da ke ƙasa. Bambancin +/- 1 V yana cikin kewayon haƙuri.
3. Idan ƙimar tana waje da wannan kewayon haƙuri (+/- 1 V), BMS yana da lahani. A wannan yanayin, ana buƙatar maye gurbin baturi.

10/11 AH

14.5AH

TMM-ANALYSIS

Don nazarin firikwensin TMM akwai maki da yawa don dubawa:

1. Duba na gani
   mai haɗawa a kan shinge na hagu da dama
   b Das Plastikgehdause des Sensors darf die Aussparung am Ausfallende nicht beriihren
2. Gwajin aiki
   a Saka Stromer a cikin wurin aiki kuma ya hau firikwensin TMM da hannu (kamar hoto a), Stromer ya kamata yayi aiki kamar haka:
   I M25 sauyawar hanzari har zuwa 25km/h ko 15mph
   II M33> 42km/h ko 26mph
   III P48> 53km/h ko 32mph

Idan Stromer ya kasa ɗaya daga cikin waɗannan sharuɗɗan, dole ne a maye gurbin firikwensin TMM.

SHIRI

MUHIMMI!
DON ALLAH KU KIYAYE WADANNAN BAYANI DOMIN TABBATAR DA CEWA BABU WANI INGANTATTU DA TASO A LOKACIN SHIRI:

• Yi amfani da sabbin adaftan kawai tare da sauyawa don kebul na shirye-shirye (duba adadi 3).

Sigogi:
MUHIMMI! Tabbatar cewa aƙalla sigar firmware 7.6 koyaushe ana shigar dashi a cikin nunin V1.1.

STROMER V1 Tambarin Thémus a saman bututu da bututun kai		STROMBER V1.1 Tambarin Stromer a saman bututu da bututun kai
Mai Gudanarwa V1 2-Pole Power plug		Mai Gudanarwa V1.1 3-Pole Power plug

ABUBUWA MASU SHIRYA

LOKACIN FIMWARE

KARATUN SHARRIN FIRMWAR

1. Haɗa kebul ɗin shirye-shirye (tare da sabon adaftan) zuwa PC da Stromer
2. Bude "StromerV120530.exe"

MUHIMMI!
Idan an haɗa Stromer daidai da PC, za a nuna sigar firm-ware a saman kusurwar hannun dama na allon kuma ɗigon matsayi zai zama kore. Idan ba a haɗa Stromer daidai da PC ba, lambar sigar ba za a nuna ba. Digin matsayi zai zama ja. A wannan yanayin, ƙila an zaɓi tashar COM da ba daidai ba (shafin: Tsarin Tsara). Ana nuna adadin sigar firmware a launi; duk da haka, launuka daban-daban suna da mahimmanci kawai daga Shafin 7.6 zuwa sama.:

Blue: Stromer yana aiki daidai.
Ja: Bayan sake shigar da firmware tare da XC800_FLOAD.exe: sai a loda saitunan.

LOKACIN FIMWARE

1. Rufe filogin shirye-shirye
2. Haɗa kebul ɗin shirye-shirye (tare da sabon adaftan) zuwa PC da Stromer
3. Kashe maɓallin shirye-shirye
4. Kunna maɓallan shirye-shirye
5. Bude "XC800_FLOAD.exe"
   
6. Zaɓi na'urar da aka yi niyya: XC866-2F
7. Tabbatar Flash ɗin da aka tsara ya kamata a duba
8. Zaɓi tashar COM
   MUHIMMI: Ana amfani da tashar tashar COM daban-daban don kowace haɗin USB. Yi amfani da kebul na shirye-shiryen Stromer koyaushe don haɗin USB iri ɗaya.
9. Yi waɗannan umarni a cikin jerin da aka nuna:
   a) "Flash Goge"
   b)"ZABI DUKA"
   c)« GAME YANZU » saƙon « Goge Flash: Nasara
   d)» ya kamata a nuna yanzu. Idan ba haka ba, rufe shirin kuma koma Mataki na 3. «Bude File»
   e) Zaɓi & buɗe "Stromer_866_V090.hex". Lokacin da kuka fara kiran wannan bayan sabon shigarwa, kuna buƙatar kewaya zuwa babban fayil ɗin daban. Na tsohon-ample: «C\Program Files (x86)\f)«Zazzagewa» > Ya kamata taga ya bayyana tare da saƙon «Zazzagewa da Tabbatarwa suna nasara-Yuli.
   f)«Execute Flash» > Halin zai sake yin ja
   h)"Fita/Bata"
   
   
10. Bude filogin shirye-shirye (Hoto na 5). Kafin amfani da Stromer, dole ne a fara loda saitunan da farko!

LOKACIN SIFFOFIN

1. Haɗa kebul ɗin shirye-shirye (tare da sabon adaftan) zuwa PC da Stromer
2. Bude "StromerV140404.exe"
   MUHIMMI!
   Idan an haɗa Stromer daidai da PC, za a nuna sigar firmware a saman kusurwar hannun dama na allon kuma ɗigon matsayi zai zama kore. Idan ba a haɗa Stromer daidai da PC ba, lambar sigar ba za a nuna ba. Digin matsayi zai zama ja. A wannan yanayin, ƙila an zaɓi tashar COM da ba daidai ba (shafin: Tsarin Tsara). Ana nuna adadin sigar firmware a launi; duk da haka, launuka daban-daban suna da mahimmanci kawai daga Shafin 7.6 zuwa sama:
   Blue: Stromer yana aiki daidai.
   Ja: Bayan sake shigar da firmware tare da XC800_FLOAD.exe: har yanzu dole ne a loda saitunan.
3. "Load Settings"
   "Zaɓi maɓallin umarni don motar dama:

   Dutsen 25:	Dutsen 25 250W
   Dutsen 25:	Dutsen 25 500W
   Dutsen 33:	Dutsen 33 500W
   Ƙarfi 48:	Ƙarfin wutar lantarki 48 500W

   

4. "Download"
5. "Loka Saituna", don bincika cewa shirye-shiryen daidai ne (na zaɓi)
6. "Dakata"

WIRING ST1

SHIRYA MAI MULKI ASI NA 2017/ST1, ZUWA NA 2017

MUHIMMI:
DON ALLAH KU KIYAYE WADANNAN BAYANI DOMIN DOMIN BABU WATA WATA AURE A LOKACIN SHIRI:

• Yi amfani da kebul na shirye-shirye kawai da masu sauya shirye-shirye (Figs 1 & 2) daga Stromer. Ba a amfani da filogin shirye-shirye da ake buƙata don duk tsofaffin samfura (software 511).
• Dole ne a yi amfani da aikace-aikacen software na «XC Ambaliyar» da «Stromer 5T1» (duba umarnin shirye-shiryen ST1 a cikin Techbookl).

SAUKARWA DA SHIGA SOFTWARE
Ana iya saukar da software daga Strainer Portal akan shafin «Downloads» a yankin ST1. Bayan zazzagewa, buɗe ZIP ɗin file kuma shigar da shirin.
The Kebul na shirye-shirye na iya haɗawa da PC kawai bayan an gama shigarwa!
Switzerland=SetupST1MY17CH
EU= SaitaST1MY17EU
Amurka=SetupST1MY17US
Ba kamar injinan ST1 na baya ba, mai sarrafa ASI yayi ba shi da filogi na shirye-shirye, kuma ana nusar da A a ciki serial number (misali S1&-09A0117). Lokacin da Stromer An kunna, sigar software “04.9^,> yana bayyana a taƙaice akan nunina.
1. FARA SHIRI DAN ZABI INGAN PORT COM PORT
Bayan an gama shigarwa, ana sanya gajeriyar hanya zuwa shirin akan tebur. Fara shirin ta danna wannan alamar sau biyu:

1. Yanzu saka kebul na shirye-shirye a cikin tashar USB akan PC kuma haɗa shi zuwa kebul na motsi na Stromer: a madadin haka, ana iya haɗa shi da kebul ɗin nuni (duba hoto)
   
2. Da farko, matsar da shirye-shiryen sauya zuwa «KASHE» matsayi (0)
3. Yanzu matsar da shirye-shiryen sauya zuwa matsayin ON (I)
4. Nemo madaidaicin tashar COM; Za ka sami kebul na shirye-shirye a cikin taga «Devices and Printers» a kan Windows Operating System 4 FT232R USB UART 4 Danna-dama akan Properties 4. Zaɓi kayan aikin kuma za ku ga tashar tashar COM 7)
   
5. Rufe Properties taga (latsa OK) da kuma saka "Na'urori da Printers" taga.
6. Kira Stromer MY17 sake, zaɓi madaidaicin tashar COM a kusurwar dama na shirin kuma danna Haɗin kai sau biyu. LEDs suna haskaka kore lokacin da aka sami nasarar kafa haɗin haɗin gwiwa.
   

2. MOTAR SHIRIN
Zaɓi «Load daga File* a kusurwar hagu na sama a ƙarƙashin «parameter*.
Babban fayil ɗin da ke ɗauke da sigogi galibi yana kan hanyar shigarwa mai zuwa:
C:\Shirin Files (x863\ST1 MY2017 ParameterSets
Sigar saitin: CH/EU.%US
CH:
Dutsen 25=HUF5-A-500-25 
Dutsen 33=HUF5-A-500-37
Ƙarfi 48 = HUF6-A-500-45
EU:
Dutsen 25=HUF5-A-250-25
Dutsen 33=HUF5-A-500-37
Ƙarfi 48=HUF6-A-500-45
Amurka:
Darasi na 1 M32=HUFS-A-500-32
Darasi na 3 P48=HUM-A-50045Zaɓi daidai file; kawai waɗanda suka shafi kasuwanni daban-daban (CH, EU, ko Amurka) an jera su
Zaɓin file don motar da aka haɗa zuwa Stromer (misali Power48 = HUF6-8-500-45) kuma buɗe; aikace-aikacen sai ya fara.
Saƙon "Madaidaicin Ajiye zuwa Flash* yana bayyana a alamar 99%. Danna "Ok* don rufewa.
Saƙon "Madaidaicin Ajiye zuwa Flash* yana bayyana a alamar 99%. Danna "Ok* don rufewa.

SHIGA SOFTWARE

Je zuwa"File» kuma zaɓi "Bootloader".

Babban fayil ɗin yana yawanci akan hanyar shigarwa da aka keɓe:
C:\Shirin Files (x86)\ST1 MY2017 CH Firmware
Zaɓi EHX file kuma zaɓi "Ok"; tsarin shigarwa sannan ya fara.

"An yi nasara zazzagewar firmware" daga baya an nuna.
Zaɓi "Ok" don rufewa; an shigar da firmware.

KARANTA DARAJAR TMM DA SAURAN BAYANI

Ana iya karanta ƙimar firikwensin ƙarfin ƙarfi akan allon «Bayanai»:

Matsala=TMM
Axle karfin juyi firikwensin biya diyya voltage=KASHE

A gefen dama, an jera wasu ƙididdiga masu yawa kamar:

• Bita na software
• Baturi voltage
• Yanayin cajin baturi
• zazzabi mai sarrafawa