synapse DIM10-087-06-A Mai Haɗaɗɗen Sarrafa
GARGADI DA HANKALI:
- DOMIN GUJEWA WUTA, TSORO, KO MUTUWA: KASHE WUTA A KARSHEN CIRCUIT KO FUSE DA GWADA WUTA TA KASHE KAFIN SHIGA!
- ABUBUWAN DA YA KAMATA INGANCI ANA BUKATA DON GUJI TSAYE TSAYE WANDA ZAI IYA LALACEWA MASU MANA A LOKACIN SHIGA .
- Idan ba ku da tabbas game da wani ɓangare na waɗannan umarnin, tuntuɓi ma'aikacin lantarki; ƙwararrun ma'aikata ne su yi duk aikin.
- Cire haɗin wuta a mai watsewar kewayawa ko fuse lokacin hidima, sakawa ko cire kayan aiki ko canza lamps.
BAYANI
- Matsakaicin Matsakaici Mai Ikon sarrafawa: 30mA Source/Sink
- Mitar rediyo: 2.4 GHz (IEEE 802.15.4)
- Ƙarfin fitarwa na RF: +20dBM
- Yanayin aiki: -40 zuwa +85 C
- Humidity na Aiki: 10 zuwa 90%, mara taurin kai
- Direbobi: Iyakance zuwa Direbobin LED 4
- Girman Waya: 20 AWG, 7" Wayoyi, 600V
- Girma: 3.05"L x 2.21" W x .47" H (77.6 x 56.1 x 11.8 mm)
HANKALI
DIM10-087-06-Dole ne a shigar da masu sarrafawa daidai da na ƙasa, jiha, da lambobin lantarki da buƙatu.
HANYOYIN TSIRA
A ƙasa akwai wasu shawarwari don cin nasara dimming ta amfani da DIM10-087-06-A. Ana nusar da wayoyi masu sarrafa dimming azaman Dim+ da Dim-. Sigina masu raguwa suna da madaidaicin voltagda 10V DC.
- Kar a niƙa wayar DIM zuwa ƙasan chassis; wannan sigina ce ta dawowa kuma yana da mahimmanci don dimming daidai.
- Hanyar dimming wayoyi daga layin AC idan zai yiwu.
- Matsakaicin Direbobin LED 4 akan kowane mai sarrafawa, tuntuɓi Tallafin Synapse idan ana buƙatar babban rabo.
- Kar a hau zuwa heatsink ko zuwa direban LED.
- Lokacin shigar da DIM10-087-06-A cikin yadi, ana buƙatar la'akari da matsayin eriya na waje da tsangwama don samar da mafi kyawun ƙarfin siginar mara waya. Kafin hawansa na dindindin, tabbatar da cewa eriya ta nuna sama ko ƙasa kai tsaye kuma ba ta da kowane ƙarfe a cikin inci 12 na eriya.
Shigar da Eriya Da Ya dace
KAYAN BUKATA
- 50 OHM Terminator toshe RP-SMA: Sashe na lamba 132360RP daga Amphenol. (Ana amfani da shi don kariya ta wucin gadi na mai haɗin eriya yayin shigarwa kuma ana iya sake amfani da shi)
- Hardware na hawa: (2) # 4 da M3 screws shawarar
- Kit ɗin Eriya: Don samun zaɓuɓɓukan eriya da fatan za a koma zuwa sabbin takaddun mu da ke kan mu website. www.synapsewireless.com/documentation
UMARNIN SHIGA
GARGADI: DOMIN GUJEWA WUTA, TSORO, KO MUTUWA: KASHE WUTA A WAJEN CIRCUIT BREAKER KO FUSE DA TABBATAR DA WUTA YA KASHE KAFIN WAYA!
HANKALI DA ANTENNA
- Tabbatar cewa an kashe wutar. Lokacin sarrafa kebul na eriya, mai fasaha dole ne ya zama ƙasa tare da madaidaiciyar madaurin ƙasa.
- Cire murfin kura jan roba, mai wanki, da goro daga mahaɗin eriya.
- Haɗa 50 OHM Terminator zuwa babban RP-SMA na hannun hannu.
- Ƙayyade mafi kyawun wuri don matsayi na eriya na waje kuma ƙirƙirar buɗewa don hawa eriya da babban kan.
Ramin hawan da aka ba da shawarar don eriya mai zaren 1/4-36UNS-2A tare da lebur - Cire 50 OHM Terminator.
- Ciyar da babban kan ta hanyar buɗewa a cikin kayan aiki.
(Lura: Nasihar max kauri na bangon gyarawa shine 6mm ko 0.25 inci. Wannan yana ba da damar isashen zaren a waje na kayan aiki don kyakkyawar haɗin eriya.) - Sanya mai wanki da goro a kan mai haɗin eriya kuma amintacce don daidaitawa.
- Dunƙule a kan eriya hannun m. Matse juzu'i 1/4 tare da nau'i-nau'i na hancin allura. Kar a ƙara ƙarfi sosai ko fil ɗin RF a cikin babban kan zai tsage, haifar da rashin ingancin hanyar haɗin RF
HAUWA
- Sanya mai sarrafawa a wurin da ake so kuma a kiyaye shi ta amfani da #4 ko M3 masu girman sukurori ta amfani da ramukan hawa da ke gefen baya na DIM10-087-
06- A.
WIRING THE DIM10-087-06-A MAI MULKI
Lura: Sai dai in an fayyace, haɗin kai zuwa daidaitaccen direban Dim to Off LED da direban LED DALI 2 iri ɗaya ne. - Haɗa fitowar 5-24V DC Aux daga direban LED zuwa waya (POWER = RED) na DIM10-087-06-A.
- Haɗa waya (COMMON/DIM- = BLACK) na DIM10-087-06-A zuwa COMMON/DALI- ko COMMON/DIM- dangane da direban LED da kake da shi.
HANYAR SANSORA
Lura: Matakai 12-15 don ƙara na'urori masu auna firikwensin zuwa mai sarrafa DIM10-087-06-A; idan ba ku haɗa na'urori masu auna sigina ku tsallake wannan sashin.
Akwai abubuwan shigar da firikwensin guda biyu akan DIM10-087-06-A wanda aka ƙera don ƙananan na'urori masu ƙarfi (24V DC).- Ana amfani da waya (SENSOR A = BLUE) don haɗa firikwensin A.
- Ana amfani da waya (SENSOR B = ORANGE) don haɗa firikwensin B.
- Haɗa wayar wutar firikwensin zuwa AUX a kan direban LED (direban LED yana ba da firikwensin).
- Haɗa firikwensin gama gari zuwa COMMON/DALI- ko na kowa/DIM- dangane da direban LED da kake da shi.
- Haɗa firikwensin CTRL/Control waya zuwa waya (SENSOR A = BLUE) ko waya (SENSOR B = ORANGE) na mai sarrafa DIM10-87-06-A.
- Idan kana amfani da firikwensin fiye da ɗaya to kwafin shigarwa kamar yadda aka bayyana a sama.
HAƊA DA'IYYAR DIMMING
Lura: Matakai 16-18 sune don haɗawa har zuwa Madaidaicin Dim zuwa Kashe direban LED; idan kana amfani da direban LED DALI 2 tsallake zuwa matakai 19-21. - Haɗa waya (DIM+ = PURPLE) daga DIM10-087-06-A zuwa wayar DIM+ akan direban LED.
- Haɗa waya (COMMON/DIM- = BLACK) daga DIM10-087-06-A zuwa wayar DIM akan direban LED.
- Wayoyi marasa amfani (DALI- = BROWN) da (DALI+ = YELLOW) wayoyi.
Lura: Matakai 19-21 sune don haɗawa zuwa direban LED DALI 2. - Haɗa wayar DIM10-087-06-A (DALI- = BROWN) zuwa waya data kasance (Common/DM- = BLACK) waya (haɗe a mataki na 11) zuwa COMMON/DALI- waya akan direban LED.
- Haɗa wayar (DALI+ = YELLOW) daga DIM10-087-06-A zuwa Direban LED DALI+.
- Sanya waya mara amfani (DIM+ = PURPLE).
KARFAFA KYAUTA DA MAI MULKI
Bayan haɗa Mai Gudanarwa zuwa Direban LED da kowane na'urori masu auna firikwensin, tabbatar da rufe duk wayoyi marasa amfani. Kunna wutar lantarki zuwa kayan aiki. Hasken ya kamata ya kunna. 
LATSA
Lura: Lokacin da aka kunna mai sarrafawa waɗannan launuka suna nuna halin yanzu.
- Ja = Babu hanyar sadarwa da aka samo (Bace Sadarwa)
- Green Blinking = An samo hanyar sadarwa, Ba a saita Mai Sarrafa ba (har yanzu ba a ƙara na'urar zuwa SimplySNAP ba)
- Green = An samo hanyar sadarwa, An saita Mai sarrafawa (Aiki na yau da kullun)
Koma zuwa Manual mai amfani na SNAP Kawai don bayani kan samar da DIM10-087-06-A.
GARGADI:
- Idan ana amfani da mai sarrafa Synapse guda ɗaya don fitar da shigarwar DIM+ na direbobi masu yawa na LED, to, dole ne a ɗaure duk layin DIM daga duk direbobi kai tsaye tare don samar da dawowa/ƙasa gama gari ga mai sarrafawa.
- Synapse ba zai ba da garanti ba ko zama abin dogaro ga ƙira tare da kowace hanyar lantarki na haɗa layin DIM daga direbobi da yawa.
BAYANIN HUKUNCI DA TABBAS
Bayanin Bayyanar RF: Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa na 20cm tsakanin radiyo da jikinka. Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.
Takaddun shaida na Masana'antu Kanada (IC): Wannan na'urar dijital ba ta wuce iyakokin Class B don hayaniya ta rediyo daga na'urar dijital da aka tsara a cikin Dokokin tsoma bakin Rediyo na Sashen Sadarwa na Kanada.
Takaddun shaida na FCC da bayanan tsari (Amurka kawai)
FCC Sashe na 15 Class B: Wannan na'urar ta bi sashe na 15 na dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- Waɗannan na'urori bazai haifar da tsangwama mai cutarwa ba, kuma
- Dole ne waɗannan na'urori su karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki mai cutarwa.
RADIO YAWAN KATSINA (RFI) (FCC 15.105): An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, amfani, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma ana amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:
- Sake daidaitawa ko ƙaura eriyar karɓa;
- Ƙara haɓaka tsakanin kayan aiki da mai karɓa;
- Haɗa kayan aiki a cikin hanyar fita a kan wani kewaye daban-daban daga abin da aka haɗa mai karɓa;
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
Bayanin Daidaitawa (FCC 96-208 & 95-19)
Synapse Wireless, Inc. ya bayyana cewa sunan samfurin "DIM10-087-06-A" wanda wannan sanarwar ke da alaƙa da ita, ya cika buƙatun da Hukumar Sadarwa ta Tarayya ta ayyana kamar yadda dalla-dalla a cikin cikakkun bayanai masu zuwa:
- Sashe na 15, Ƙarshen B, don kayan aikin Class B
- FCC 96-208 kamar yadda ya shafi kwamfutoci masu zaman kansu na Class B da kayan aiki
- An gwada wannan samfurin a dakin gwaje-gwaje na waje wanda aka tabbatar da shi bisa ga ka'idodin FCC kuma an same shi ya dace da FCC, Sashe na 15, Iyakokin fitarwa. Ana kunna takaddun file kuma ana samun su daga Synapse Wireless, Inc.
Idan FCC ID na module ɗin da ke cikin wannan shingen samfur ba a iya gani lokacin shigar da shi a cikin wata na'ura, to dole ne wajen na'urar da aka shigar da wannan samfurin a ciki dole ne ya nuna alamar da ke magana da FCC ID ɗin da ke kewaye. Canje-canje (FCC 15.21): Canje-canje ko gyare-gyare ga wannan kayan aikin da Synapse Wireless, Inc. ya amince da shi kai tsaye, na iya ɓata ikon mai amfani don sarrafa wannan kayan aikin.
TAMBAYOYI
- Samfura: DIM10-087-06-A
- Ya ƙunshi ID na FCC: U9O-SM220
- Ya ƙunshi IC: 7084A-SM220
- UL File Saukewa: E346690
DALI-2 Ingantacciyar Mai Kula da Aikace-aikacen
Tuntuɓi Synapse don Tallafawa- 877-982-7888
Takardu / Albarkatu
 |
synapse DIM10-087-06-A Mai Haɗaɗɗen Sarrafa [pdf] Jagoran Shigarwa DIM10-087-06-A Mai Haɗaɗɗen Sarrafa, DIM10-087-06-A, Mai haɗawa, Mai Sarrafa |
