MASU SAMUN FASAHA EU-292n v2 Jiha Biyu tare da Sadarwar Gargajiya
TSIRA
Kafin amfani da na'urar a karon farko mai amfani yakamata ya karanta waɗannan ƙa'idodi a hankali. Rashin bin ƙa'idodin da aka haɗa a cikin wannan jagorar na iya haifar da rauni na mutum ko lalacewar mai sarrafawa. Ya kamata a adana littafin littafin mai amfani a wuri mai aminci don ƙarin tunani.
Don kauce wa hatsarori da kurakurai, ya kamata a tabbatar da cewa kowane mutum da ke amfani da na'urar ya saba da ka'idar aiki da kuma ayyukan tsaro na mai sarrafawa. Idan za a sayar da na'urar ko sanya shi a wani wuri na daban, tabbatar da cewa littafin jagorar mai amfani yana wurin tare da na'urar ta yadda kowane mai amfani ya sami damar samun mahimman bayanai game da na'urar.
Mai sana'anta baya karɓar alhakin duk wani rauni ko lalacewa sakamakon sakaci; don haka, masu amfani dole ne su ɗauki matakan tsaro da suka dace da aka jera a cikin wannan littafin don kare rayukansu da dukiyoyinsu.
GARGADI
- Na'urar lantarki mai rai! Tabbatar cewa an cire haɗin mai sarrafawa daga na'urorin sadarwa kafin yin duk wani aiki da ya shafi wutar lantarki (toshe igiyoyi, shigar da na'urar da dai sauransu).
- ƙwararren ma'aikacin lantarki ne ya sanya na'urar.
- Bai kamata yara su sarrafa na'urar ba.
GARGADI
- Ana iya lalata na'urar idan walƙiya ta faɗo. Tabbatar cewa an cire haɗin filogi daga wutar lantarki yayin da ake tsawa.
- Duk wani amfani banda fayyace ta masana'anta haramun ne.
- Ya kamata a duba na'urar lokaci-lokaci.
Canje-canje a cikin hajar da aka siffanta a cikin jagorar ƙila an gabatar da ita bayan kammala ta a ranar 10.10.2022. Mai ƙira yana riƙe da haƙƙin gabatar da canje-canje ga tsari ko launuka. Misalan na iya haɗawa da ƙarin kayan aiki. Fasahar bugawa na iya haifar da bambance-bambance a cikin launukan da aka nuna.
Mun himmatu wajen kare muhalli. Kera na'urorin lantarki yana ɗora alhakin samar da amintaccen zubar da kayan aikin lantarki da aka yi amfani da su. Don haka, an shigar da mu cikin rajistar da Hukumar Inspection for Environmental Protection ta ajiye. Alamar kwandon da aka ketare akan samfur na nufin cewa ƙila ba za a zubar da samfurin a kwantena na sharar gida ba. Sake amfani da sharar gida yana taimakawa wajen kare muhalli. Wajibi ne mai amfani ya canja wurin kayan aikin da aka yi amfani da su zuwa wurin tarawa inda za a sake yin amfani da duk kayan lantarki da na lantarki.
BAYANIN NA'URA
EU-292n v2 mai kula da ɗakin ɗakin an yi niyya don sarrafa na'urar dumama ko sanyaya (misali gas, mai ko tukunyar wutan lantarki ko mai sarrafa tukunyar jirgi).
Babban aikinsa shine kiyaye yanayin zafin da aka riga aka saita a cikin ɗakin kwana ta hanyar aika sigina zuwa na'urar dumama/ sanyaya (buɗewar lamba) lokacin da zafin da ake so ya kai.
Babban software yana bawa mai sarrafa damar cika ayyuka da yawa:
- kiyaye zafin dakin da aka riga aka saita
- yanayin hanya
- shirin rana/dare
- sarrafa mako-mako
- kula da tsarin dumama ƙasa (na zaɓi; ƙarin firikwensin zafin jiki ya zama dole)
Kayan aikin sarrafawa:
- maɓallan taɓawa
- gaban panel sanya daga 1mm gilashin
- ginanniyar firikwensin zafin jiki
- baturi
EU-292n v2 mai kula da ɗakin yana ba da nau'ikan nuni guda biyu:
- daidaitattun bayanai (ana nuna bayanan a baki da fari)
- korau (ana nuna bayanan da fari akan bangon baki)
Akwai nau'ikan launi biyu:
EU-292n v2 yana aiki tare da ƙarin mai karɓar siginar EU-MW-3 (wanda aka haɗa a cikin saitin mai sarrafawa), wanda aka ɗora kusa da na'urar dumama.
YADDA AKE SHIGA CONTROLER
NOTE
ƙwararren ma'aikacin lantarki ne ya sanya na'urar.
- EU-292n v2 mai kula da ɗakin ɗaki - zanen haɗi
Domin shigar da na'urar yadda ya kamata, bi zanen da ke ƙasa. Ya kamata a haɗa kebul na sadarwa mai mahimmanci biyu zuwa tashoshin da suka dace a cikin mai karɓa.
Ana iya amfani da mai kula da EU-292n v2 azaman bangon bango ko kuma ana iya sanya shi akan kowace ƙasa ta amfani da tsayawar da aka haɗa a cikin saitin.
MAI KARBAR MULKI NA WIRless
Mai sarrafa EU-292n v2 yana sadarwa tare da na'urar dumama (ko mai sarrafa tukunyar jirgi CH) ta hanyar siginar rediyo da aka aika zuwa mai karɓar EU-MW-3. Ana haɗa irin wannan mai karɓar zuwa na'urar dumama (ko mai kula da tukunyar jirgi na CH) ta hanyar kebul mai mahimmanci biyu, kuma yana sadarwa tare da mai sarrafa ɗakin ta amfani da siginar rediyo.
Mai karɓa yana da fitilun sarrafawa guda uku:
- haske mai kulawa ja 1 - yana nuna alamar karɓar bayanai;
- haske mai kulawa ja 2 - yana nuna aikin mai karɓa
- haske mai sarrafa ja 3 - yana ci gaba lokacin da zafin dakin ya kasa isa ga ƙimar da aka riga aka saita - ana kunna na'urar dumama.
NOTE
Idan babu sadarwa (misali saboda cire baturi), mai karɓar ta atomatik yana kashe na'urar dumama bayan mintuna 15.
Rajista na mai karɓar EU-MW-3:
1. Danna maɓallin rajista akan mai karɓar EU-MW-3.
2. Domin yin rijistar relays, zaɓi aikin "Reg" a cikin Menu na EU-292n v2 regulator kuma ka riƙe maɓallin Menu ko danna ɗaya daga cikin maɓallan. 
. Sakon "SC's" yana nufin cewa rijistar ta yi nasara yayin da aka yi alamar kuskuren rajista tare da saƙon "Kuskure". A kowane hali ana iya ci gaba da rajista ta latsa kowane maɓalli (ban da EXIT).
Ana nuna adadin relays masu rijista akan allon. Idan mai sarrafa yana da relays 6 masu rijista (mafi girman lamba), yana yiwuwa a cire su kuma an nuna saƙon "Del". Yin amfani da ɗaya daga cikin maɓallan zaɓi zaɓin da ya dace "e" ko "a'a" dangane da ko kuna son cire rajistar relay ko a'a.
FARKON FARKO
Domin mai sarrafa EU-292n v2 yayi aiki daidai, bi waɗannan matakan lokacin fara na'urar a karon farko:
- Saka batura - don yin shi, cire murfin baya mai sarrafawa.
- Idan mai kula da ɗakin zai sarrafa tsarin dumama ƙasa, haɗa ƙarin firikwensin zuwa mai haɗin firikwensin ƙasa.
- Haɗa kebul-core guda biyu zuwa kwasfa masu dacewa a cikin mai karɓa.
YADDA AKE AMFANI DA CONTROLER
KA'IDAR AIKI
EU-292n v2 mai kula da dakin an ƙera shi don kula da zafin jiki da aka riga aka saita ta hanyar aika sigina zuwa na'urar dumama/ sanyaya (buɗe lamba) lokacin da aka saita zafin dakin da aka riga aka saita. Bayan karɓar irin wannan siginar, na'urar dumama/ sanyaya ta ƙare (idan an haɗa ta da mai sarrafa tukunyar jirgi na CH, tukunyar jirgi na CH yana canzawa zuwa yanayin ci gaba bayan karɓar siginar).
f ana amfani da mai sarrafa a yanayin dumama, yana iya yin aiki tare da firikwensin bene. A cikin irin wannan yanayin, lambar sadarwa tana kasancewa a rufe lokacin da zafin ƙasa ya kasance ƙasa da mafi ƙarancin ƙima. Bayan an ƙetare zafin jiki na kofa, lambar sadarwar zata kasance a rufe har sai an kai ga zafin da aka saita a ɗakin. Idan zafin firikwensin bene ya wuce matsakaicin ƙimar, mai sarrafawa zai buɗe lambar sadarwa ba tare da la'akari da yanayin zafin ɗakin na yanzu ba.
NOTE
Don ayyukan dumama ƙasa ya kasance a cikin menu na mai sarrafawa, ƙarin firikwensin dole ne a haɗa shi da lambar firikwensin ƙasa.
HANYOYIN AIKI
Mai sarrafa ɗakin yana iya aiki a ɗayan hanyoyin aiki masu zuwa:
- Yanayin rana/dare
A cikin wannan yanayin ƙimar zafin jiki da aka riga aka saita ya dogara da lokacin yau. Mai amfani na iya saita ƙimar zafin jiki daban-daban don rana da dare (zazzabi mai daɗi da yanayin tattalin arziki) da kuma ayyana ainihin lokacin shiga yanayin rana da yanayin dare.
Domin kunna wannan yanayin, danna maɓallin EXIT har sai alamar yanayin rana/dare ya bayyana akan babban allo.
- Ikon mako-mako
Wannan yanayin yana bawa mai amfani damar ayyana lokacin da aka saita zafin jiki da aka riga aka saita da tattalin arziki
zafin jiki zai shafi. Mai amfani na iya saita shirye-shirye daban-daban guda 9 zuwa rukuni uku:
- SHIRIN 1÷3 - ana saita ƙimar zafin rana na yau da kullun don duk kwanakin mako;
– SHIRIN 4÷6 – An saita ƙimar zafin rana daban-daban don kwanakin mako (Litinin-Jumma'a) da kuma na ƙarshen mako (Asabar-Lahadi);
– SHIRIN 7÷9 – An saita ƙimar zafin rana don kowace rana ta mako daban.
* Nuni yana nuna sa'o'in lokacin da yanayin zafi ya shafi. A cikin sauran lokacin lokacin zafin tattalin arziki ya shafi.
Domin kunna wannan yanayin, danna EXIT har sai gunkin sarrafawa na mako-mako ya bayyana akan babban allo
- Yanayin manual
A wannan yanayin ana daidaita zafin jiki da aka riga aka saita da hannu daga babban allo view tare da amfani da waɗannan maɓallan:
. Yanayin manual yana kunna ta atomatik lokacin da aka danna ɗayan waɗannan maɓallan. Da zarar yanayin jagora ya kunna, yanayin aiki na baya yana shiga yanayin barci har sai canjin zafin jiki da aka riga aka tsara na gaba. Ana iya kashe yanayin da hannu ta latsa maɓallin FITA.
Example 1 – Yanayin kunnawa a cikin yanayin Rana/dare
Lokacin da yanayin Rana/dare ke aiki, mai amfani yana canza yanayin zafin da aka saita ta latsa ɗaya daga cikin maɓallan wanda ke kunna yanayin hannu ta atomatik. Mai sarrafawa yana komawa yanayin Rana/dare lokacin da rana ta canza zuwa dare (ko wata hanyar zagaye) ko lokacin da mai amfani ya danna EXIT.
Example 2 – Kunna yanayin jagora a cikin yanayin sarrafawa na mako-mako
Lokacin da iko na mako-mako ke aiki, mai amfani yana canza yanayin zafin da aka saita ta latsa ɗaya daga cikin maɓallan wanda ke kunna yanayin jagora ta atomatik. Mai sarrafawa yana komawa yanayin sarrafawa na mako-mako lokacin, bisa ga jadawalin mako-mako, zafin jiki na tattalin arziki yana canzawa zuwa yanayin zafi (ko wata hanyar zagaye) ko lokacin da mai amfani ya danna EXIT.
BABBAN ALAMOMIN VIEW DA BAYANI
Mai amfani yana aiki da na'urar ta amfani da maɓallan taɓawa. Yayin da ake gyara siga ɗaya, sauran gumaka ba a nuna su ba.
- Nunawa
- FITA a babban allo view - danna wannan maɓallin don kunna ikon sarrafawa na mako-mako ko yanayin rana/dare. A cikin menu mai sarrafawa, yi amfani da wannan maɓallin don tabbatar da saitunan kuma komawa zuwa babban allo view.
a babban allo view – danna wannan maɓallin don canzawa zuwa yanayin jagora kuma rage ƙimar zafin da aka saita da aka riga aka saita. A cikin menu mai sarrafawa, yi amfani da wannan maɓallin don canza saitunan sigogi, shigar da lambar sabis da sauransu.
a babban allo view – danna wannan maɓallin don canzawa zuwa yanayin hannu kuma ƙara ƙimar zafin jiki da aka saita. A cikin menu mai sarrafawa, yi amfani da wannan maɓallin don canza saitunan sigogi, shigar da lambar sabis da sauransu.- MENU – Riƙe wannan maɓallin don shigar da menu na mai sarrafawa. Yayin gyara sigogi, danna wannan maɓallin don tabbatar da canje-canje kuma ci gaba don gyara siga na gaba.
- Ranar mako
- Alamar da ke ba da labari game da yanayin tattalin arziki na yanzu (sakamakon sarrafawar mako-mako ko saitunan yanayin rana/dare).
- Alamar da ke ba da labari game da zafin jiki na halin yanzu (sakamakon sarrafawar mako-mako ko saitunan yanayin rana/dare).
- Alamar da ke ba da labari game da nuna zafin bene na yanzu (maki 6 akan nuni) - firikwensin bene dole ne ya kasance kuma yayi rijista a cikin menu mai sarrafawa.
- Yanayin bene
- An riga an saita yanayin ɗaki
- Lokaci
- Matsayin man shanu
- Alamar da ke ba da labari game da sanyaya/ dumama ɗaki. Rawan rai ya bambanta dangane da yanayin aiki da aka zaɓa:
Yanayin dumama – alamar tana walƙiya lokacin da zafin da aka saita bai kai ba; yana tsayawa lokacin da aka riga aka saita zafin jiki.
Yanayin kwantar da hankali - alamar tana juyawa lokacin da zafin jiki ya kasance sama da ƙimar da aka riga aka saita; yana tsayawa lokacin da aka kai saitattun zafin jiki. - Yanayin aiki na yanzu:
a. mako-mako
b. Manual
c. Rana/dare - Yanayin dakin na yanzu
- Gumakan siga (duba: tebur a ƙasa)
|
Gumakan siga: |
|||
 |
Saitunan agogo |
 |
Firikwensin bene |
 |
Rana daga… |
 |
zafin jiki na ta'aziyya |
 |
Dare daga… |
 |
Yanayin tattalin arziki |
 |
Mafi kyawun farawa |
 |
Ciwon ciki |
 |
Kulle maɓalli |
 |
Canjin firikwensin zafin jiki |
 |
Saitunan sarrafawa na mako-mako |
||
AYYUKAN MULKI
Mai amfani yana kewaya tsarin menu ta amfani da shi , FITA da MENU. Domin gyara sigogi na musamman, danna MENU. Na gaba, danna MENU zuwa view Ayyukan mai sarrafawa - sigar da aka gyara tana walƙiya yayin da sauran sigogin ba a nuna su ba. Amfani don canza saitunan sigina. Danna MENU don tabbatar da canje-canje kuma ci gaba don gyara siga na gaba ko latsa kuma FITA don tabbatar da canje-canje kuma komawa kan babban allo. view.
*Waɗannan ayyuka ana nuna su ne kawai bayan an haɗa ƙarin firikwensin zuwa lambar firikwensin ƙasa kuma kunna a cikin menu mai sarrafawa ta zaɓi ON a cikin menu na firikwensin bene.
RANAR MAKO
Bayan shigar da babban menu, duk gumakan da ba a haɗa su da ma'aunin da ake gyarawa ba a nuna su. Siga na farko shine ranar mako. Latsa or har sai an nuna ranar da ake ciki na mako.
Danna MENU don tabbatarwa kuma matsawa zuwa siga na gaba ko danna EXIT don tabbatarwa da komawa kan babban allo view.
KYAUTA ARGO
Domin saita lokaci na yanzu, danna MENU har sai kwamitin saitin lokaci ya kasance
nunawa akan allon. Ta dannawa 
saita sa'a kuma
mintuna.
Danna MENU don tabbatarwa kuma matsawa zuwa siga na gaba ko latsa
FITA don tabbatarwa kuma komawa kan babban allo view.
RANA DAGA…
Wannan aikin yana bawa mai amfani damar ayyana ainihin lokacin shigar da yanayin rana. Lokacin da yanayin rana/dare ke aiki, zafin jiki na ta'aziyya yana aiki da rana. Don saita wannan siga danna MENU har sai Rana daga… saitin ya bayyana akan allon. Ta dannawa saita sa'a da minti na kunna yanayin rana.
Danna MENU don tabbatarwa kuma matsawa zuwa siga na gaba ko FITA don tabbatarwa da komawa kan babban allo view.
DARE DAGA…
Wannan aikin yana bawa mai amfani damar ayyana ainihin lokacin shigar da yanayin dare. Lokacin da yanayin rana/dare ke aiki, yanayin tattalin arziki yana aiki da dare. Don saita wannan siga danna MENU har sai Dare daga… saitin ya bayyana akan allon. Ta dannawa saita sa'a da minti na kunna yanayin dare.
Danna MENU don tabbatarwa kuma matsawa zuwa siga na gaba ko danna EXIT don tabbatarwa da komawa kan babban allo view.
Domin kunna makullin maɓalli, danna MENU har sai gunkin maɓalli
ya bayyana. Yi amfani da ɗaya daga cikin maɓallan don zaɓar ON. Domin buɗewa
maɓallan, danna ka riƙe maɓallan a lokaci guda, zaɓi
aikin kulle maɓalli kuma zaɓi KASHE.
GASKIYA FARA
Mafi kyawun farawa shine tsarin fasaha mai sarrafa tsarin dumama/ sanyaya. Ya ƙunshi kulawa akai-akai game da ingantaccen tsarin dumama / sanyaya da amfani da bayanin don kunna dumama / sanyaya a gaba don isa yanayin yanayin da aka riga aka saita.
A- Canjin da aka riga aka tsara daga zafin jiki na tattalin arziki zuwa yanayin zafi - canjin da aka riga aka tsara daga zafin jiki na tattalin arziki zuwa yanayin zafi
Kunna wannan aikin yana nufin cewa a lokacin canjin shirye-shiryen da aka riga aka tsara na yanayin zafin da aka saita ta hanyar jadawalin, yanayin dakin na yanzu zai kasance kusa da ƙimar da ake so.
Domin kunna wannan aikin, danna MENU har sai mafi kyawun saitunan farawa ya bayyana. Yi amfani da maɓallan don kunna / kashe aikin.
Danna MENU don tabbatarwa kuma matsawa zuwa siga na gaba ko danna EXIT don tabbatarwa da komawa kan babban allo view.
HANYA MANHAJAR atomatik
Wannan aikin yana ba da damar sarrafa yanayin hannu. Idan wannan aikin yana aiki (ON), yanayin jagora yana kashe ta atomatik lokacin da aka gabatar da canjin da aka riga aka tsara sakamakon yanayin aiki da ya gabata. Idan aikin ya kashe (KASHE), yanayin jagora yana ci gaba da aiki ba tare da la'akari da canje-canjen da aka riga aka shirya ba.
SHIRIN MAKON
Ana amfani da wannan aikin don canza tsarin sarrafawa na mako-mako na yanzu da kuma gyara shirye-shiryen mako-mako.
- YADDA AKE CHANYA LAMBAR SHIRIN NA MAKO
Lokacin da aka kunna ikon mako-mako (duba: VII.2. Yanayin aiki) shirin na yanzu yana kunna. Domin zaɓar lambar shirin, danna MENU har sai saitunan shirye-shiryen mako ya bayyana akan allon.
Ta latsawa da riƙe maɓallin MENU mai amfani yana buɗe allon zaɓin shirin. Duk lokacin da mai amfani ya riƙe maɓallin MENU, lambar shirin tana canzawa. Lokacin da lambar da ake so ta bayyana akan allon, danna MENU - mai sarrafawa zai dawo kan babban allo view kuma an saita lambar shirin da aka zaɓa.
- YADDA AKE TSAYA MUSAMMAN SHIRYEN MAKO
Shirin mako-mako yana bawa mai amfani damar ayyana lokacin lokacin da zafin jiki da yanayin tattalin arziki za su yi aiki.
Dangane da lambar shirin, mai amfani zai iya saita ƙimar zafin rana na yau da kullun don duk kwanakin mako (shirye-shiryen 1÷ 3), na ranakun mako da ƙarshen mako daban (tsari 4÷ 6) kuma ga kowace rana ta mako daban (shiri 7÷). 9).
Domin gyara shirin mako-mako, danna MENU har sai allon saitin shirin mako-mako ya buɗe.
Mataki na 1 - ZABIN SHIRIN DA AKE GYARA:
Ta latsa da riƙe maɓallin MENU mai amfani yana buɗe allon gyara shirin. Duk lokacin da mai amfani ya riƙe maɓallin MENU, lambar shirin tana canzawa. Lokacin da lambar da ake so ta bayyana akan allon, mai amfani zai iya fara gyara sigoginsa.
Mataki na 2 - ZABEN KWANAKI NA MAKO
Idan mai amfani yana son gyara shirye-shirye 1÷3, babu yuwuwar zaɓar takamaiman ranaku na mako kamar yadda saitin ya shafi kowace rana.
Idan mai amfani yana so ya gyara shirye-shirye 4÷6 , yana yiwuwa a gyara saitunan don kwanakin mako da karshen mako daban. Danna MENU a taƙaice don zaɓar.
Idan mai amfani yana son gyara shirye-shirye 7÷9, yana yiwuwa a gyara saitunan kowace rana daban. Danna MENU a taƙaice don zaɓar rana.
Mataki na 3 - KADA KASANCEWA DA WUYA KO MATSALAR TATTALIN ARZIKI GA SA'O'I NA MUSAMMAN.
Ana nuna sa'a guda da ake gyara akan allon mai sarrafawa. Domin sanya yanayin zafi, latsa . Domin zaɓar yanayin tattalin arziki, latsa . Mai sarrafawa yana motsawa ta atomatik zuwa gyara sa'a mai zuwa.
Ana nuna ma'auni na shirin mako-mako a kasan allon: sa'o'in da aka sanya yanayin zafi ana nuna su yayin da sa'o'in da aka sanya yanayin tattalin arziki ba a nuna su ba.
Exampda:
Hoton hoto mai zuwa yana gabatar da saitunan yau da kullun na shirin No. 7 na ranar Litinin
00⁰⁰-00⁵⁹- zafin jiki
01⁰⁰-08⁵⁹- zazzabi mai dadi
09⁰⁰-14⁵⁹- zafin jiki
15⁰⁰-21⁵⁹- zazzabi mai dadi
22⁰⁰-23⁵⁹- zafin jiki
NOTE
Lokacin da mai amfani ya gama aikin gyare-gyare ta danna maɓallin EXIT, mai sarrafawa zai dawo kan babban allo view kuma an zaɓi wannan shirin azaman shirin na yanzu.
Pre-SATATA TA'AZIYYA
Ana amfani da zafin jiki da aka riga aka saita a cikin yanayin sarrafawa na mako-mako da yanayin rana/dare. Danna maɓallin MENU har sai allon canjin zafin jiki na ta'aziyya ya buɗe. Latsa don saita zafin da ake so.
Danna MENU don tabbatarwa kuma matsawa zuwa siga na gaba ko latsa
FITA don tabbatarwa kuma komawa kan babban allo view.
KAFIN SATA MATSALAR TATTALIN ARZIKI
Ana amfani da zafin jiki da aka riga aka saita a cikin yanayin sarrafawa na mako-mako da yanayin rana/dare. Danna maɓallin MENU har sai allon canjin yanayin tattalin arziki ya buɗe. Latsa don saita zafin da ake so.
Danna MENU don tabbatarwa kuma matsawa zuwa siga na gaba ko danna EXIT don tabbatarwa da komawa kan babban allo view
MATSAYI ZAFIN HYSTERESIS
Yanayin zafin jiki na ɗaki yana bayyana haƙurin zafin zafin da aka saita da farko don hana jujjuyawar da ba'a so idan akwai ƙananan canjin zafin jiki (a cikin kewayon 0,2 ÷ 4°C).
Domin saita ƙugiya, danna MENU har sai allon saitin hysteresis ya buɗe. Amfani don saita ƙimar hysteresis da ake so.
Danna MENU don tabbatarwa kuma matsawa zuwa siga na gaba ko danna EXIT don tabbatarwa da komawa kan babban allo view.
Exampda:
Yanayin da aka riga aka saita: 23°C
Ciwon ciki: 1 ° C
Mai kula da ɗakin ya ba da rahoton cewa zafin jiki ya yi ƙasa sosai kawai lokacin da zafin dakin ya faɗi zuwa 22 ° C.
CALIBRATION SENSOR
Ya kamata a yi gyare-gyare yayin hawa ko bayan an yi amfani da mai sarrafawa na dogon lokaci, idan zafin dakin da aka auna ta firikwensin ciki ya bambanta da ainihin zafin jiki. Kewayon saitin daidaitawa shine daga -10 zuwa +10 ⁰C tare da daidaiton 0,1⁰C. Don daidaita firikwensin da aka gina a ciki, danna maɓallin MENU har sai allon daidaita yanayin firikwensin ya bayyana. Yi amfani da maɓallan don saita gyara da ake so.
Don tabbatarwa, danna maɓallin MENU (tabbatar kuma ci gaba don gyara siga na gaba) ko danna EXIT don tabbatarwa kuma komawa kan babban allo. view.
RAJIBI
Ana iya samun bayanin ayyukan a babi na IV. Mai karɓar mai sarrafa mara waya
SENSOR BENE
Yi amfani da ɗaya daga cikin maɓallan don kunna firikwensin ƙasa (ON) ko kashe shi (KASHE). Don tabbatarwa, danna maɓallin MENU (tabbatar kuma ci gaba don gyara siga na gaba) ko danna EXIT don tabbatarwa kuma komawa kan babban allo. view.
NOTE
Wajibi ne a saita wannan aikin zuwa ON domin waɗannan sigogi su kasance a cikin menu mai sarrafawa: matsakaicin zafin jiki na ƙasa, firikwensin bene, mafi ƙarancin zafin ƙasa.
MATSALAR FASAHA
Domin saita matsakaicin zafin bene, kunna dumama ƙasa kuma danna MENU har sai matsakaicin allon zafin bene ya buɗe.
Na gaba, amfani don saita matsakaicin zafin jiki.
Don tabbatarwa, danna maɓallin MENU (tabbatar kuma ci gaba don gyara siga na gaba) ko danna EXIT don tabbatarwa kuma komawa kan babban allo. view.
MATSALAR FASAHA
Domin saita mafi ƙarancin zafin ƙasa, ba da damar dumama ƙasa kuma danna MENU har sai ƙaramin allon zafin ƙasa ya buɗe.
Na gaba, amfani don saita mafi ƙarancin zafin jiki.
Don tabbatarwa, danna maɓallin MENU (tabbatar kuma ci gaba don gyara siga na gaba) ko danna EXIT don tabbatarwa kuma komawa kan babban allo. view.
HUKUNCIN FUSKA
Tsawon yanayin zafin bene yana bayyana haƙurin zafin zafin da aka saita don hana juzu'in da ba'a so idan akwai ƙaramin canjin zafin jiki a cikin kewayon 0,2 ÷ 4°C. Domin saita tsattsauran ra'ayi, danna MENU har sai allon hysteresis ya buɗe. Na gaba, yi amfani da ko don saita hysteresis. Don tabbatarwa, danna maɓallin MENU (tabbatar kuma ci gaba don gyara siga na gaba) ko danna EXIT don tabbatarwa kuma komawa kan babban allo. view.
Exampda:
Yanayin da aka riga aka saita: 23°C
Ciwon ciki: 1 ° C
Mai kula da ɗakin ya ba da rahoton cewa zafin jiki ya yi ƙasa sosai kawai lokacin da zafin dakin ya faɗi zuwa 22 ° C.
An kiyaye wasu ayyukan mai sarrafawa tare da lamba. Ana iya samun su a menu na sabis. Domin gabatar da canje-canje a cikin saitunan menu na sabis, danna MENU har sai allon saitunan menu na sabis ya buɗe. Na gaba, yi amfani da maɓallan don shigar da lambar - 215. Zaɓi lamba ta farko - 2 kuma tabbatar da riže maɓallin Menu har sai lamba ta gaba ta fara walƙiya. Bi ta wannan hanya tare da ragowar lambobi na lambar. Latsa MENU don tabbatarwa.
- Yanayin zafi/SANYI
Wannan aikin yana bawa mai amfani damar zaɓar yanayin aiki na mai kula da ɗakin:
COOL - sarrafa tsarin sanyaya
ZAFI - sarrafa tsarin dumama
Yi amfani da maɓallan don zaɓar nau'in tsarin da za a sarrafa. Don tabbatarwa, danna maɓallin MENU (tabbatar da
ci gaba don gyara siga na gaba) ko danna EXIT don tabbatarwa kuma komawa kan babban allo view.
NOTE
Kada a zaɓi yanayin sanyaya a yanayin amfani da firikwensin bene - yana iya haifar da lalacewar tsarin ƙasa.
- Yadda ake shirya mafi ƙarancin (T1) da matsakaicin (T2) zafin da aka saita
Wannan aikin yana bawa mai amfani damar saita mafi ƙanƙanta (T1) da matsakaicin (T2) da aka riga aka saita zafin ɗaki. Zaɓi wannan zaɓi - sigar ta fara walƙiya. Yi amfani da maɓallan don saita yanayin zafi. Don tabbatarwa, danna maɓallin MENU (tabbatar kuma ci gaba don gyara siga na gaba) ko danna EXIT don tabbatarwa kuma komawa kan babban allo. view. - Ganiya Fara daidaitawa
Mafi kyawun daidaitawar farawa yana farawa lokacin da mai sarrafawa ya gano buƙatun dumama don isa ga zafin da aka saita, tare da mafi kyawun aikin farawa. - DEF factory saituna
Wannan aikin yana bawa mai amfani damar dawo da saitunan masana'anta. Don yin shi, zaɓi Ayyukan Def kuma danna MENU don tabbatarwa.
Na gaba, yi amfani da maɓallan don zaɓar YES kuma bi ta latsa MENU.
DATA FASAHA
| EU-292n v2 | |
| Tushen wutan lantarki | 2 xAA 1,5V baturi |
| Kewayon saitin zafin ɗaki | 5oC÷ 35oC |
| Daidaiton ma'auni | ± 0,5oC |
| Mitar aiki | 868 MHz |
| EU-MW-3 | |
| Ƙarar voltage | 230V ± 10% / 50Hz |
| Yanayin aiki | 5°C ÷ 50°C |
| Matsakaicin amfani da wutar lantarki | <1W |
| Ci gaba mai yuwuwar rashin kyauta. ba . fita. kaya | 230V AC / 0,5A (AC1) * 24V DC / 0,5A (DC1) ** |
| Mitar aiki | 868MHz |
| Matsakaicin ikon watsawa | 25mW ku |
* nau'in nauyin AC1: lokaci-ɗaya, mai juriya ko ɗan ƙaramin ƙarfin AC.
** nau'in lodi na DC1: halin yanzu kai tsaye, mai juriya ko ɗan ƙarar nauyi.
shi hotuna da zane-zane na zane ne kawai.
Mai sana'anta yana da haƙƙin gabatar da wasu rataye.
Sanarwa Da Daidaitawa
Don haka, muna ayyana ƙarƙashin alhakinmu kawai cewa EU-292n v2 wanda TECH STEROWNIKI ya kera, wanda ke da hedkwata a Wieprz Biała Droga 31, 34-122 Wieprz, ya bi umarnin 2014/53/EU na Majalisar Turai da na Majalisar 16 Afrilu 2014 game da daidaitawa da dokokin ƙasashe membobin da suka shafi samarwa a kasuwannin kayan aikin rediyo, Jagoran 2009/125/EC da ke kafa tsarin saitin buƙatun ecodesign don samfuran da ke da alaƙa da makamashi da kuma ƙa'ida ta Ma'aikatar Harkokin Kasuwanci da Fasaha ta 24 ga Yuni 2019 tana gyara ƙa'idar game da mahimman buƙatun dangane da ƙuntata amfani da wasu abubuwa masu haɗari a cikin kayan lantarki da na lantarki, aiwatar da tanade-tanaden Umarni (EU) 2017/2102 na Majalisar Turai da na Majalisar 15 ga Nuwamba 2017 da ke gyara Umarnin 2011/65/EU kan ƙuntata amfani da wasu abubuwa masu haɗari a cikin kayan lantarki da na lantarki (OJ L 305, 21.11.2017, p. 8).
Don kimanta yarda, an yi amfani da ma'auni masu jituwa:
PN-EN IEC 60730-2-9: 2019-06 art. 3.1a Amintaccen amfani
PN-EN 62479: 2011 art. 3.1 a Amintaccen amfani
TS EN 301 489-1 V2.2.3 (2019-11) art.3.1b Daidaitawa na lantarki
TS EN 301 489-3 V2.1.1: 2019-03 art.3.1 b Daidaitawar wutar lantarki
ETSI EN 300 220-2 V3.2.1 (2018-06) art.3.2 Amfani mai inganci da haɗin kai na bakan rediyo
ETSI EN 300 220-1 V3.1.1 (2017-02) art.3.2 Amfani mai inganci da haɗin kai na bakan rediyo
Tallafin Abokin Ciniki
Babban hedkwatar:
ul. Biata Droga 31, 34-122 Wieprz
Sabis:
ul. Skotnica 120, 32-652 Bulowice
waya: +48 33 875 93 80
e-mail: serwis@techsterowniki.pl
Takardu / Albarkatu
 |
MASU SAMUN FASAHA EU-292n v2 Jiha Biyu tare da Sadarwar Gargajiya [pdf] Manual mai amfani EU-292n v2 Jiha Biyu tare da Sadarwar Gargajiya, EU-292n v2, Jiha biyu tare da Sadarwar Gargajiya, Sadarwar Gargajiya |
