TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Ƙayyadaddun bayanai

• Samfura: Q103
• Daidaituwa: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Haɗin kai: Bluetooth, 2.4G Wireless, USB (Type-C)
• Aikin Voltage: DC 3.7V
• Aiki Yanzu: <30mA
• Barcin Mara: <5uA
• Cajin Voltage/Yanzu: DC 5V/500mA

Shirya matsala

• Mai sarrafawa baya haɗawa:
  • Tabbatar da cikakken cajin mai sarrafawa.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Tabbatar cewa an kunna Bluetooth akan na'urarka.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Maɓallan baya amsawa:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Test the controller in a different game or application.
• Lalacewar shigarwa:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Rage tsangwama daga wasu na'urorin mara waya.
  • Try connecting via USB cable if available.
• Mai sarrafawa baya caji:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Gwada wani kebul na Type-C ko adaftar wutar lantarki daban.
  • The LED indicator should show the charging status.

Q103 zane mai aiki

1. D-pad Button
2. Maballin X/Y/A/B
3. HOME Reconnect/Power Button
4. MAGANAR BIYU
5. Zaɓi Maballin
6. Maballin TURBO
7. Maballin Joystick/L3 na Hagu
8. Maɓallin Joystick/R3 Dama
9. MAFITA MAFITA
10. Maballin Fara
11. L Button
12. Maballin L2
13. Type-C Cajin Port
14. Maballin R2
15. Maballin R
16. Sake saita rami
17. LED
18. Yanayin Canjawa

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Win 10 da sama

Haɗin Bluetooth

1. Juya canjin: Canja zuwa X don shigar da yanayin X-INPUT.
2. Amfani na farko (Power-on pairing):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • LED ɗin koyaushe ja ne lokacin da aka yi nasara sake haɗawa.
3. Yi amfani kuma (Sake haɗawa):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. LED ɗin koyaushe ja ne lokacin da aka yi nasara sake haɗawa.
4. Press the PAIR button to power off the device.

Yanayin SAUYA

Haɗin Bluetooth

1. Juya canjin: Canja zuwa S don shigar da yanayin Canjawa.
2. Amfani na farko (Power-on pairing):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   LED ko da yaushe kore ne lokacin da sake haɗawa ya yi nasara.
3. Yi amfani kuma (Sake haɗawa):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus don Android

Android 9.0 da sama

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. Amfani na farko (Power-on pairing):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Yi amfani kuma (Sake haɗawa):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Danna maɓallin Biyu don kashe na'urar.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Haɓaka firmware

1. Haɗa V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Saitunan Joystick

• Roka calibration
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Sigar lantarki

• Aiki voltagSaukewa: DC3.7V
• Aiki na yanzu: <30mA
• A halin yanzu barci: <5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Lokacin jiran aiki: kwanaki 30 (cikakken caji)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Ayyukan barci / farkawa:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

Gargadi na FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Tsanaki: Duk wani canje-canje ko gyare-gyare ga wannan na'urar da masana'anta suka yarda da su kai tsaye na iya ɓata ikon sarrafa wannan kayan aikin.
Wannan na'urar ta bi sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
2. Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.

Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa na 0cm tsakanin radiyo da jikinka.