R1 Smart Motion Sensor
“
Ƙayyadaddun bayanai
- Name: Smart Motion Sensor R1
- Saukewa: R1
- Girma: N/A
- Mai aiki Voltage: N/A
- Nau'in Baturi: N/A
- Mitar Aiki: N/A
- Working Condition: N/A
- Yanayin Zazzabi Aiki: N/A
Bayanin Samfura
The Smart Motion Sensor R1 is a wireless motion sensor designed
to detect movement within a specific range. It features adjustable
sensitivity levels and LED indicators to provide real-time feedback
on motion detection.
Umarnin Amfani da samfur
Saita
- Open the battery cover and remove the insulation strip to power
akan na'urar. - If not in pairing mode, press and hold the + button for 10
seconds to factory reset. - Follow platform instructions to add the device.
Using Case
- Place the sensor in a suitable location away from interference
kafofin. - Adjust sensitivity level (1-5) based on sensing distance.
- Set up routines on the platform using the sensor as a
jawo
Shigarwa
The sensor can be placed on a table or mounted on a wall using
sukurori.
- A tsaye a kan tebur
- Rataya a bango
Shirya matsala
To optimize detection accuracy:
- Avoid installing on metal surfaces; use insulating layers if
dole. - Keep the sensor away from strong signal fields of other
na'urorin mara waya. - Avoid placing multiple sensors with detection surfaces opposite
juna.
FAQ
Q: How do I adjust the sensitivity level of the R1 sensor?
A: The sensitivity level can be adjusted by pressing the +/-
buttons on the device. Refer to the user manual for specific
instructions on changing sensitivity levels.
Q: Can I use the R1 sensor with platforms other than those
jera?
A: The R1 sensor is compatible with platforms such as Amazon
SmartThings, Home Assistant, Hubitat, ThirdReality, Homey, and
Aeotec. For optimal functionality, it is recommended to use with
these supported platforms.
"'
Smart Motion Sensor R1
Jagoran Fara Mai Sauri
Bayanin Samfura
The THIRDREALITY Motion Sensor R1 is the perfect companion for a smarter, more secure home. Seamlessly integrating with popular Zigbee hubs like Echo devices with built-in Zigbee hubs, SmartThings, and Home Assistant, it fits effortlessly into your existing setup. Imagine customizing its detection range from 1.5 to 9.5 meters to monitor your living room, hallway, or office just the way you need. With three AA batteries, the sensor delivers long-lasting performance up to 3 years in typical use, so you can focus on what’s important without constant maintenance. Set up routines via compatible apps to turn on lights as you enter a room or receive instant alerts when motion is detected, adding convenience and peace of mind. Whether placed discreetly on a shelf or mounted on a wall, the Motion Sensor R1 adapts to your space, keeping your home connected and secure.
Ƙayyadaddun bayanai
Name Model Dimensions Operating Voltage Nau'in Batirin Aiki Mitar Aiki Yanayin Aiki Matsayin Zazzabi
Smart Motion Sensor R1 3RSMR01067Z 2.56 inch×1.18 inch×2.56 inch DC 4.5V AA battery × 3 (included) Zigbee 3.0 : 2.4GHz, Radar : 5.8GHz Indoor Use Only Default 0~40 (indoor)
Detect Level & Range
Darasi na 1
Range (m/inch) 1.5 / 59 3.5 / 138 5.5 / 217 7.5 / 295 9.5 / 374
01
Ayyukan maɓallin
Sake saita (+) LED (-)
Alamar Sake saitin Aiki Haɓaka hankali En/Kashe motsi gano haske Rage hankali
Tsarin Latsa ka riƙe na daƙiƙa 10 Danna sau ɗaya Danna kuma ka riƙe tsawon daƙiƙa 3 Danna sau ɗaya
Matsayin LED
An gano Motsin Sake saitin Masana'antar Ayyuka
Ƙarshen Baturi Na Waye
Description The LED is illuminated. The LED flashes rapidly. When the device is triggered, the indicator light for the current sensitivity level will illuminate for 1 second. The LED flashes once every 3 seconds. The LED flashes twice every 5 seconds.
*Za a sake amfani da hasken mai nuna hankali tare da hasken mai nuna matsayi.
02
03
Saita
1. Buɗe murfin baturi akan na'urar kuma cire tsiri mai rufewa don kunna na'urar.
2. Lokacin da na'urar ke kunne, mai nuna hankali zai yi haske da sauri kuma na'urar za ta shiga yanayin haɗin kai na Zigbee. Idan firikwensin baya cikin yanayin haɗin kai, danna kuma riƙe maɓallin + na daƙiƙa 10 don sake saita firikwensin masana'anta.
3. Bi umarnin kan dandamali don ƙara na'urar.
Dandali masu jituwa
Platform Amazon SmartThings Home Assistant Hubitat ThirdReality Homey Aeotec
Requirement Echo with built-in Zigbee hub 2015/2018 models, Station ZHA and Z2M with Zigbee dongle With Zigbee hub Smart Hub/Smart Bridge MZ1 Homey Bridge/Pro Aeotec Hub
04
Using Case
1. Hang or place the R1 sensor in a suitable and sturdy location. This location should be away from the wireless router and places where there may be slight vibrations (such as washing machines). If there are multiple R1 sensors, avoid overlapping sensing areas to cause false alarms.
2. After completing the installation, you should first adjust the sensor’s sensitivity. There are 5 sensitivity levels from low to high, represented by numbers 1-5. Please try the sensing distance from level 3 (The default is level 3). If the sensing distance is too close, you can switch to a higher level, otherwise you should adjust to a lower level. The sensitivity and LED indicator switch can only be adjusted on the device.
3. Start setting the routine. The R1 sensor is the same as the Wireless Motion sensor. You can select the R1 sensor as the trigger on the platform, and then set some switches or devices as reactors. When the device is triggered, the indicator light for the current sensitivity level will illuminate for 1 second.
05
Shigarwa
Samfurin yana nuna ƙirar ƙira, yana ba da damar sanya shi kai tsaye a kan tebur ko sanya shi a bango ta amfani da sukurori.
Kulle
1 A tsaye akan tebur
2 Hang on the wall 06
Shirya matsala
To achieve the desired detection accuracy: Do not install the sensor on a metal surface. If you need to install it, please place a non-metallic insulating layer (e.g. plastic or rubber pad, >5mm thick) between the radar and the metal surface. When installing the sensor, please keep it at least 1m away from other wireless devices that will create a strong signal field (e.g. Wireless router). When installing multiple radar sensors, do not place the detection surfaces opposite each other.
Duba lambar QR zuwa view cikakkun bayanai
https://bit.ly/3PdGajZ 07
Yarjejeniyar Dokokin FCC
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation.
Canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
NOTE: An gwada wannan kayan aikin kuma an same shi don biyan iyakoki don na'urar dijital ta Class B, bisa ga sashi na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifar da amfani kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba a shigar da shi ba kuma aka yi amfani da shi daidai da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:
08
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help important announcement. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Bayanin Bayyanar Radiation
Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa 20cm tsakanin radiyo da jikinka. Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.
09
Bayanin ISED
Wannan na'urar ta dace da Ƙirƙira, Kimiyya da Ci gaban Tattalin Arziƙi Kanada-kyaɓanta lasisin ma'auni(s) RSS. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
(1) wannan na'urar bazai haifar da tsangwama ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so.
Le présent appareil est confrome aux CNR d’ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit mai karɓa da ba da izini ga radioélectrique subi, même si le brouillage ne mai saukin kamuwa da cuta.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator& your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Le rayonnement de la classe b reecte ISED fixaient un environnement non contrôlés.Installation et mise en oeuvre de ce matériel devrait avec echangeur nesa minimale entre 20 cm ton gawawwaki.
Garanti mai iyaka
For limited warranty, please visit https://3reality.com/faq-help-center/ For customer support, please contact us at info@3reality.com or visit www.3reality.com For questions on other platforms, visit the corresponding platform’s application/support platform.
10
11
11
Takardu / Albarkatu
 |
THIRDREALITY R1 Smart Motion Sensor [pdf] Jagorar mai amfani R1_QSG_20250310, R1, R1 Smart Motion Sensor, R1 Motion Sensor, Smart Motion Sensor, Motion Sensor, Smart Sensor, Sensor |