TROX TR2X Air Diffusers

Ƙayyadaddun bayanai

• Samfura: Masu watsawa na iska - Garin iska TR2X
• Samfura: TR2X
• Ƙasa: GB/en

Samfurin Ƙarsheview
The Air diffusers - Ventilation grille TR2X samfuri ne da aka tsara don amfani da shi don samun iska na sararin samaniya a cikin masana'antu da wuraren jin dadi. An haɗa shi da iskar wadata ko fitar da tsarin iska wanda aka haɗa da na'urar sarrafa iska.

Umarnin Amfani da samfur

Ka'idojin Tsaro

• Ana ba da shawarar kwalkwali na aminci na masana'antu don kare kai daga faɗuwar abubuwa, rataye lodi, da tasiri akan abubuwan da ke tsaye.
• Safofin hannu masu kariya suna da mahimmanci don kare hannaye daga hatsarori daban-daban kamar gogayya, yanke, da tuntuɓar wurare masu zafi.
• Takalmin tsaro suna da mahimmanci don kare ƙafafu daga murkushewa, faɗuwa sassa, da zamewa a ƙasa mai santsi.

Shigarwa
Kafin shigarwa, tabbatar da cewa yankin ya dace da samfurin. Yi la'akari da yanayin ɗakuna masu ɗanɗano, yanayi mai yuwuwar fashewa, ko wuraren da ke da ƙura ko iska mai ƙarfi.

Aiki
Haɗa na'urorin tashar iska zuwa tsarin iska mai dacewa. Tabbatar cewa samfurin yana samar da iska tsakanin ƙayyadadden bambance-bambancen zafin jiki.

Kulawa
Kulawa na yau da kullun yana da mahimmanci don tabbatar da ingantaccen aiki. Bi buƙatun tsabta don takamaiman aikace-aikace kuma tantance yanayi lokaci-lokaci.

Cancantar Ma'aikata
Ma'aikatan da aka horar kawai ya kamata su kula da shigarwa, aiki, da kulawa. Ma'aikatan da aka horar da su mutane ne masu horar da ƙwararru, ilimi, da gogewa don gudanar da ayyuka cikin aminci.

Kayan Kariyar Keɓaɓɓen (PPE)
Koyaushe sanya PPE da ya dace don aikin da ke hannu don rage haɗarin lafiya da aminci. PPE ya haɗa da kwalkwali na aminci na masana'antu, safofin hannu masu kariya, da takalma masu aminci.

Masu rarraba iska

Jirgin iska mai iska TR2X

• TROX Hesco Schweiz AG Neuhofstrasse 4 8630 Rüti ZH Switzerland
• Waya: +41 55 250 71 11 Fax: +41 55 250 73 10 E-Mail: trox-hesco@troxgroup.com http://www.troxhesco.ch

Samfurin Ƙarsheview

Hoto 1: Misalin tsari TR2X

1. Iyakar gaba
2. Countersunk ramukan
3. Abin da aka makala (SAS)

Muhimman bayanai

Bayani akan littafin shigarwa

• Wannan jagorar yana bawa ma'aikatan aiki ko sabis damar shigar daidai da samfurin da aka kwatanta a ƙasa da kuma amfani da shi cikin aminci da inganci.
• Yana da mahimmanci waɗannan mutane su karanta kuma su fahimci wannan littafin sosai kafin fara kowane aiki. Babban abin da ake buƙata don aiki mai aminci shine kiyaye bayanan aminci da duk umarnin da ke cikin wannan jagorar.
• Dokokin gida don lafiya da aminci a wurin aiki da ƙa'idodin aminci na gabaɗaya su ma suna aiki.

Sauran takardun aiki
Baya ga waɗannan umarni, dole ne a kiyaye waɗannan takaddun:

• Takardar bayanan samfur

Iyakar abin alhaki

• An tattara bayanan da ke cikin wannan littafin game da ƙa'idodi da jagororin da suka dace, yanayin fasaha, da ƙwarewarmu da ƙwarewarmu na shekaru masu yawa.
• Mai sana'anta ba ya karɓar kowane alhaki don lalacewa da aka samu daga:
  • Rashin bin wannan jagorar
  • Amfani da ba daidai ba
  • Aiki ko kulawa ta mutane marasa horo
  • gyare-gyare mara izini

Tsaro

Haƙiƙanin iyakar isarwa na iya bambanta da bayani da kwatancen da aka bayar a cikin wannan jagorar don sigar musamman, amfani da ƙarin zaɓuɓɓukan oda, ko sakamakon canje-canjen fasaha na kwanan nan.

Tsaro

Daidai amfani

• Ana amfani da na'urorin tashar iska don samun iska na sararin samaniya a cikin masana'antu da wuraren jin dadi. Ana haɗa na'urorin tashar jiragen sama zuwa iskar wadata ko fitar da tsarin iska (ta wasu), wanda galibi ana haɗa shi da na'urar sarrafa iska.
• Na'urorin tasha na iska suna ba da iska mai sanyi ko dumi zuwa ɗakuna (a cikin ƙayyadaddun iskar da aka bayyana zuwa ɗaki-banbancin yanayin iska).
• Shigarwa, aiki, da kiyayewa ƙila dole ne su cika buƙatun tsafta don wasu wuraren aikace-aikacen.
• Shigarwa a cikin ɗakuna masu ɗanɗano, wuraren da ke da yuwuwar fashewar yanayi, ko ɗakunan da ke ɗauke da ƙura ko iska mai ƙarfi dole a tantance tukuna saboda ya dogara da ainihin yanayin wurin.

Ma'aikata

cancanta

Ma'aikatan da aka horar
Ma'aikatan da aka horar da su mutane ne waɗanda ke da isassun ƙwararrun ƙwararru ko horo na fasaha, ilimi, da gogewa don ba su damar gudanar da ayyukan da aka ba su, fahimtar duk wani haɗari mai haɗari da ke da alaƙa da aikin da ake la'akari, da ganewa da kuma guje wa duk wani haɗari.

Kayan kariya na sirri

• Dole ne a sanya kayan kariya na sirri don kowane aiki don rage haɗarin lafiya ko aminci zuwa ƙarami.
• Dole ne a sa kayan kariya masu dacewa don aiki muddin aikin ya ɗauka.

Kwalkwali aminci na masana'antu

Kwalkwali na aminci na masana'antu suna kare kai daga faɗuwar abubuwa, dakatar da lodi, da illar bugun kai akan abubuwan da ke tsaye.

Safofin hannu masu kariya

Safofin hannu masu kariya suna kare hannaye daga gogayya, gogayya, huɗa, yanke mai zurfi, da hulɗa kai tsaye tare da saman zafi.

Takalmin aminci

Takalmin tsaro suna kare ƙafafu daga murkushewa, faɗuwa sassa, da zamewa akan ƙasa mai santsi.

Gyara da sauyawa sassa
ƙwararrun ma'aikata ne kawai dole ne su gyara samfuran, kuma dole ne su yi amfani da kayan maye na gaske.

Sufuri da ajiya

Duban isarwa
Bayan bayarwa, a hankali cire marufi kuma duba na'urar don kowane lalacewar sufuri da kammala. Idan akwai lalacewar sufuri ko isarwa bai cika ba, sanar da wakili mai aikawa da mai kaya nan take. Bayan duba kayan, mayar da samfurin a cikin marufinsa don kare shi daga ƙura da gurɓata.

Majalisa

Gyarawa da shigar da kayan aiki
Gyarawa da kayan shigarwa ba wani ɓangare na kunshin wadata ba (sai dai idan an bayyana in ba haka ba), amma dole ne wasu su samar da su; dole ne ya dace da yanayin shigarwa.

Transport akan wurin

HANKALI!

• Haɗarin rauni daga kaifi masu kaifi, sasanninta masu kaifi, da sassan ƙarfe na bakin ciki!
• Ƙaƙƙarfan gefuna, sasanninta masu kaifi, da sassan ƙarfe na bakin ciki na iya haifar da yanke ko kiwo.
  • Yi hankali lokacin gudanar da kowane aiki.
  • Saka safar hannu masu kariya, takalma masu aminci, da hula mai wuya.

Kula da waɗannan abubuwan yayin jigilar kaya:

Yi hankali lokacin zazzagewa ko motsi samfurin akan rukunin yanar gizon, kuma kula da alamomi da bayanai akan marufi.

• Idan zai yiwu, ɗauki samfurin a cikin marufin jigilarsa har zuwa wurin shigarwa.
• Don ɗaure zuwa tsarin ginin, yi amfani da kayan ɗagawa kawai da kayan sufuri da aka tsara don nauyin da ake buƙata.
• Yayin jigilar kaya, koyaushe kiyaye lodi daga tipping da faɗuwa.
• Aƙalla mutane biyu ne ya kamata a yi jigilar manyan kayan aiki don hana rauni da lalacewa.

Adana
Kula da waɗannan abubuwan don ajiya:

• Ajiye samfurin kawai a cikin ainihin marufi
• Kare samfurin daga tasirin yanayi
• Kare samfurin daga zafi, ƙura, da gurɓatawa
• Zazzabi na ajiya: -10 ° C zuwa 90 ° C
• dangi zafi: 80 % matsakaicin, babu condensation

Marufi

Zubar da kayan tattarawa da kyau.

Majalisa
Gabaɗaya bayanin shigarwa na Ma'aikata:

• Ma'aikatan da aka horar

Kayan aikin kariya:

• Kwalkwali aminci na masana'antu
• Safofin hannu masu kariya
• Takalmin aminci

Kula yayin shigarwa:

• Gyara samfurin kawai zuwa abubuwan tsari masu ɗaukar kaya.
• Load da dakatarwa kawai tare da nauyin na'urar. Abubuwan da ke kusa da haɗin kai dole ne a tallafawa daban.
• Yi amfani kawai yarda da isassun kayan gyarawa (ba a haɗa kayan gyarawa a cikin fakitin wadata ba).
• Bayan shigarwa, masu rarraba iska dole ne su kasance cikin sauƙi don dalilai na tsaftacewa.
• Kayan shigarwa da hatimin da masana'anta ke bayarwa galibi ana rufe su a cikin jaka a cikin kunshin.

Kare na'urar daga kura da gurɓatawa.
Kafin shigarwa, tabbatar da cewa abubuwan da aka haɗa da iska ba za su iya gurɓata ba ta ayyukan gine-gine (VDI, SWKI, Ö-norm). Idan hakan ba zai yiwu ba, aƙalla rufe na'urar ko ɗaukar wasu matakan kariya daga gurɓata A wannan yanayin, tabbatar da cewa na'urar ba ta aiki. Tabbatar cewa duk abubuwan da aka gyara sun kasance masu tsabta kafin shigar da su. Tsaftace sosai idan ya cancanta Lokacin katse tsarin shigarwa, kare duk buɗewar na'urar daga shigar ƙura ko zafi.

Umarnin aminci don shigarwa

HANKALI!

Hadarin rauni saboda shigar da ba daidai ba!

• Gilashin iska na iya yin nauyi har zuwa kilogiram 25, dangane da girman da haɗe-haɗe. Idan sun faɗi, akwai babban haɗarin rauni ko lalacewar dukiya. Dangane da yanayin shigarwa, dole ne a tabbatar da cewa an ɗauki matakan da suka dace don hana faɗuwa.
• A cikin yanayin shigar rufi ko shigarwa a babban tsayi, ana iya buƙatar ƙarin matakan tsaro ban da nau'in ɗaure mai dacewa (haɗin dunƙule) don hana na'urar faɗuwa.

Gyara nau'ikan

Hoto 2: Gyara nau'ikan

1. Ƙarfafa -0: Ƙarfafa Ramin ƙira.
2. Hawan -SP: Hawan mara nauyi (baya view).

Yawan ramukan ƙirƙira

Tsawo H [mm]	Tsawon B [mm]
	225	325	425	525	625	825
75	4	4	4	4	6	6
125	4	4	4	4	6	6
225	4	4	4	4	6	6
325	-	4	4	4	6	6

Adadin gyaran SP

Tsawo H [mm]	Tsawon B [mm]
	225	325	425	525	625	825
75	2	2	2	2	2	2
125	2	2	2	2	2	2
225	2	2	2	2	2	2
325	-	4	4	4	4	4

Bayanan fasaha

Girma

Hoto 3: Buɗewar shigarwa babu shigarwa
Hoto 4: Buɗewar shigarwa SP

X dole ne ya zama aƙalla 4 mm don gyaran SP

Hoto 5: Gyarawa

1. Gyaran ramin countersunk
2. Boye dunƙule gyara SP ba tare da shigar da subframe

SANARWA!
SP gyarawa da aka yi da takardar karfe

Saukewa: TR2X

Gyarawa	Buɗewar shigarwa [mm]	min. clampnisa [mm]
Countersunk rami	(B-10) x (H-15)	-
SP	(B-5) x (H-5)	4
A'A	(B-10) x (H-15)	-

TR2X-R/RA

Gyarawa	Buɗewar shigarwa [mm]	min. clampnisa [mm]
Countersunk rami	(B-10) x (H-15)	-
A'A	(B-10) x (H-15)	-

Hoto 6: Ramin dunƙulewa

Ramin rami na TR2X

Tsawon B [mm]	X	Y	nxF
225	250	167	-
325	350	267	-

Tsawon B [mm]	X	Y	nxF
425	450	367	-
525	550	467	-
625	650	567	2×283.5
825	850	767	2×383.5

Ramin rami na TR2X

Tsawo H [mm]	N	C
75	100	75
125	150	125
225	250	225
325	350	325

Saukewa: TR2X. grille nauyi [kg]

H/B	225	325	425	525	625	825
75	0.6	0.7	0.9	1.2	1.3	1.8
125	0.9	1.1	1.3	1.7	1.9	2.5
225	1.2	1.5	1.8	2.4	2.7	3.7
325	-	1.9	2.2	3.0	3.3	4.3

TR2X ma'aunin nauyi AG ba tare da gasa ba [kg]

H/B	225	325	425	525	625	825
75	0.4	0.6	0.7	0.8	1.1	1.2
125	0.6	0.9	1.0	1.1	1.5	1.7
225	0.8	1.2	1.4	1.6	2.1	2.4
325	-	1.5	1.7	2.0	2.6	2.9

TR2X ma'aunin nauyi AS ba tare da gasa ba [kg]

H/B	225	325	425	525	625	825
75	0.3	0.4	0.5	0.5	0.6	0.8
125	0.5	0.5	0.7	0.8	0.9	1.2
225	0.7	0.8	1.1	1.2	1.4	1.8

TR2X ma'aunin nauyi SAS ba tare da gasa ba [kg]

H/B	225	325	425	525	625	825
75	0.4	0.4	0.5	0.6	0.7	0.9
125	0.6	0.7	0.8	0.9	1.1	1.4
225	0.9	1.0	1.3	1.4	1.7	2.2

Shigar da sashin gudu na linzamin kwamfuta
An haɗa sassan ƙarshen da tsakiya ta amfani da farantin haɗin gwiwa. Ba a ganuwa bayan taro.

Hoto 7: Sashin gudu na layin shigarwa

Bayanan shigarwa

Boye dunƙule gyara -SP

Hoto 8: Shigarwa boye dunƙule gyara -SP

Girman w dole ne ya zama akalla 4 mm

Haɗin iska
Gilashin iska ba su da haɗin iska, ana shigar da su kai tsaye cikin bututun iska ko makamancin haka.

Girma

Hoto 9: TR2X-V/VH

1. Saukewa: TR2X-VH
2. Saukewa: TR2X-V
3. Saukewa: TR2X-VH
4. Saukewa: TR2X-V

Aiwatar da farko

Hoto 10: TR2X-R-VH

Janar bayani
Kafin ka fara aikin, duba waɗannan abubuwan:

• Bincika cewa an daidaita masu rarraba iska daidai.
• Cire foils masu kariya, idan akwai.
• Tabbatar cewa duk diffusers na iska suna da tsabta kuma ba su da shara da abubuwan waje.
• Bincika haɗin lantarki (idan akwai) don shigarwa daidai.
• Bincika daidaitaccen ɗauri da haɗi tare da tashar iska

Damper element tare da adawa da ruwan wukake, daidaitacce

Damper element with hit and miss damper, daidaitacce, amintaccen tare da dunƙule makullinDon ƙaddamarwa, duba kuma VDI 6022, Sheet 1 - Abubuwan da ake buƙata don tsabtace iska da tsarin kwandishan.

Daidaita yawan kwararar ƙara
A hankali kunna dunƙule cikin (madaidaicin agogo) da waje (maƙarƙashiyar agogo) don daidaitawa ko ɗaure bugun-da-miss damper. Matsa dunƙule tare da max. 0.5 nm

• AG: Daidaitawar hannu
• AS/SAS tare da screwdriver

Tsarin iska
Saita hanyar iska akan wurin ta amfani da maɓallin TR2.

Kulawa da tsaftacewa

Da fatan za a kula:

• Tazarar tsaftacewa da aka bayar a cikin ma'aunin VDI 6022 yana aiki.
• Tsaftace filaye tare da tallaamp zane.
• Yi amfani da masu tsabtace gida na gama gari kawai, kar a yi amfani da duk wasu ma'aikatan tsabtace tsafta.
• Kada a yi amfani da abubuwan tsaftacewa waɗanda ke ɗauke da chlorine.
• Kada a yi amfani da kayan aiki don cire gurɓataccen gurɓataccen abu, misali goge soso ko kirim, saboda yana iya lalata saman.

Tace canji

Abin da aka makala EF - canjin tacewa

Hoto 14: TR2 tare da abin da aka makala EF

1. Cire grille na gaba
2. Cire gurbataccen tacewa
3. Tsaftace abubuwan da aka gyara
4. Saka sabon tace
5. Saka da ɗaure gasassun

Ana ba da oda mai tacewa

• Don tabbatar da kariya ta dindindin daga shigar barbashi da ɓangarorin da aka dakatar, muna ba da shawarar amfani da matatun TROX na asali kawai.
• Tace matsakaici TGM 315-10-3 m 45%

Don guje wa raguwar lokacin iska da tsarin kwandishan, muna ba da shawarar adana abubuwan tacewa da ake buƙata.

Don yin odar tacewa: www.troxtechnik.com

Saukewa
Da zarar na'urar ta kai ƙarshen rayuwarta na sabis, dole ne a wargaje ta kuma a zubar da ita ta hanyar da ba ta dace da muhalli ba.

Tsaro

Ma'aikata

• ƙwararrun ma'aikata ne kawai za a iya yin ɓarna.
• ƙwararrun ƙwararrun masu aikin lantarki ne kaɗai za su iya

GARGADI!

• Hadarin rauni saboda rarrabuwa ba daidai ba!
• Ajiye ragowar makamashi, kaifi mai kaifi mai kaifi, maki mai kaifi, da sasanninta a cikin na'urar ko akan sakamakon kayan aikin da ake buƙata:
  • Tabbatar cewa akwai isasshen sarari kafin fara aiki.
  • Karɓar duk abubuwan buɗewa, masu kaifi mai kaifi da kulawa.
  • Kware abubuwan da aka gyara da fasaha. Ku sani cewa wasu abubuwa suna da nauyi sosai. Yi amfani da kayan ɗagawa idan ya cancanta.
  • Amintattun abubuwan haɗin gwiwa don hana su faɗuwa ko faɗuwa.
  • Lokacin da shakka, tuntuɓi masana'anta.

zubarwa

MUHALLI!

• Hadarin cutarwa ga muhalli saboda zubar da ba daidai ba!
• Zubar da ba daidai ba na iya cutar da muhalli.
  • Tabbatar da bin ƙa'idodin ƙasa da ƙa'idodi masu dacewa.
  • Idan akwai shakka, tuntuɓi hukumomin yankinku ko ƙwararrun kamfanin zubar da shara.

Lura: Dole ne a tarwatsa ginin don zubarwa. Idan babu yarjejeniya ko mayarwa tare da

TROX GmbH yana wurin, muna ba da shawarar zubar da kayan kamar haka:

Pos.	Bangaren	Abu / lambar shara	Nau'in zubarwa
1	Gabatarwar gaba	Bakin karfe	Scrap karfe sake yin amfani da
2	Abubuwan da aka bayar na AG/AB	Bakin karfe
	Bayanin AS/SAS	Aluminum
3	Tace kashi		a cewar EWC
EWC Turai Sharar gida Catalog

FAQs

Tambaya: Za a iya amfani da wannan samfurin a wuraren da ke da iska mai tsanani?
A: Ya kamata a yi la'akari da shigarwa a wuraren da ke da iska mai zafi a gaba don tabbatar da dacewa tare da ainihin yanayi a kan shafin.

Tambaya: Wane irin ma'aikata ya kamata su kula da samfurin?
A: Mutanen da aka horar da su kawai tare da ƙwararru ko ilimin fasaha da ƙwarewa ya kamata su kula da shigarwa, aiki, da kiyayewa.

Takardu / Albarkatu

TROX TR2X Air Diffusers [pdf] Littafin Mai shi TR2X Air Diffusers, TR2X, Air Diffusers, Diffusers

Magana

• Manual mai amfani