Unitronics US5-B5-B1 Ƙarfin Mai Gudanar da Dabarun Shirye-shiryen

Bayanin samfur

Ƙayyadaddun bayanai

• Akwai Siffofin: UniStream Gina-in da UniStream Gina-in Pro
• Lambobin Samfura: US5, US7, US10, US15 tare da jeri daban-daban
• Siffofin Wuta: VNC, Kariyar kalmar sirri mai matakai da yawa, Ƙararrawa na ciki
• Zaɓuɓɓukan I/O: Daban-daban ladabi na COM, goyon bayan Fieldbus, Zaɓuɓɓukan sadarwa na ci gaba
• Software na Shirye-shirye: Duk-in-One software don daidaitawa da aikace-aikace

Umarnin Amfani da samfur

• Kafin Ka Fara
  Kafin shigar da na'urar, tabbatar da karantawa da fahimtar littafin mai amfani kuma tabbatar da abubuwan da ke cikin kit ɗin.
• Alamar Faɗakarwa da Ƙuntatawa Gabaɗaya
  Kula da alamun faɗakarwa don haɗarin haɗari ko ƙuntatawa. Bi jagororin aminci kuma zubar da samfurin yadda ya kamata.
• La'akarin Muhalli
  • Tabbatar samun iska mai kyau tare da sarari 10mm tsakanin gefuna na na'ura da bangon shinge.
  • Guji shigarwa a wuraren da ke da ƙura mai yawa, danshi, zafi, ko girgiza.
  • Kauce wa lamba da ruwa ko high-voltage igiyoyi.
  • Kar a haɗa/ cire haɗin na'urar lokacin da wuta ke kunne.

Tambayoyin da ake yawan yi

Tambaya: Zan iya amfani da na'urar ba tare da karanta littafin mai amfani ba?

A: Ana ba da shawarar sosai don karantawa da fahimtar littafin mai amfani kafin amfani da na'urar don tabbatar da shigarwa da aiki daidai.

Tambaya: Menene zan yi idan na ci karo da alamar gargaɗi yayin amfani?

A: Idan kun haɗu da kowane alamun gargaɗi, koma zuwa bayanan da ke cikin littafin a hankali don hana duk wani haɗari ko lahani.

Tambaya: Zan iya shigar da na'urar a kowane yanayi?

A: A'a, bi ra'ayoyin muhalli da aka bayar a cikin jagorar don tabbatar da kyakkyawan aiki da amincin na'urar.

Samfura

• US5-B5-B1, US5-B10-B1, US5-B5-TR22, US5-B10-TR22, US5-B5-T24, US5-B10-T24, US5-C5-B1, US5-C10-B1, US5-C5-TR22, US5-C10-TR22, US5-C5-T24, US5-C10-T24
• US7-B5-B1, US7-B10-B1, US7-B5-TR22, US7-B10-TR22, US7-B5-T24, US7-B10-T24, US7-C5-B1, US7-C10-B1, US7-C5-TR22, US7-C10-TR22, US7-C5-T24, US7-C10-T24
• US10-B5-B1, US10-B10-B1, US10-B5-TR22, US10-B10-TR22, US10-B5-T24, US10-B10-T24, US10-C5-B1, US10-C10-B1, US10-C5-TR22, US10-C10-TR22, US10-C5-T24, US10-C10-T24
• US15-B10-B1, US15-C10-B1

Wannan jagorar tana ba da bayanan shigarwa na asali don takamaiman ƙirar UniStream® tare da ginanniyar I/O. Ana iya sauke ƙayyadaddun fasaha daga Unitronics website.

Gabaɗaya Features

• Unitronics'UniStream® Jerin da aka Gina sune PLC+HMI Duk-in-One masu sarrafa shirye-shirye waɗanda suka ƙunshi ginanniyar CPU, panel HMI, da ginanniyar I/Os.
• Akwai silsilar cikin nau'ikan guda biyu: UniStream Gina-in-in da UniStream Gina-in Pro.

Lura cewa lambar ƙirar da ta ƙunshi:

• B5/C5 yana nufin UniStream Gina-in
• B10/C10 yana nufin UniStream Gina-in-in Pro. Waɗannan samfuran suna ba da ƙarin fasali, dalla-dalla a ƙasa.
• HMI
  • Resistive Color Touch-screens
  • Babban ɗakin karatu mai hoto don ƙirar HMI
• Siffofin .arfi
  • Abubuwan da aka gina a ciki da Gauges, PID na atomatik, tebur na bayanai, bayanai sampling, da Recipes
  • UniApps™: Samun dama & gyara bayanai, saka idanu, gyara matsala & gyara kurakurai da ƙari - ta HMI ko nesa ta hanyar VNC
  • Tsaro: Kariyar kalmar sirri nau'i-nau'i
  • Ƙararrawa: Ginin tsarin, ma'aunin ANSI/ISA
• Zaɓuɓɓukan I/O
  • Tsarin I/O da aka gina a ciki, ya bambanta bisa ga ƙira
  • I/O na gida ta hanyar UAG-CX jerin I/O masu adaftar fadadawa da daidaitattun abubuwan UniStream UniStream Uni-I/O™
  • I/O mai nisa ta amfani da UniStream Remote I/O ko ta EX-RC1
  • US15 kawai - Haɗa I/O cikin tsarin ku ta amfani da UAG-BACK-IOADP, kuma danna kan panel don daidaitawar gabaɗaya.
• Zaɓuɓɓukan COM
  • Wuraren da aka gina a ciki: 1 Ethernet, 1 USB host, 1 Mini-B USB tashar tashar jiragen ruwa (USB-C a cikin US15)
  • Ana iya ƙara serial da CANbus tashar jiragen ruwa ta hanyar UAC-CX kayayyaki
• Ka'idojin COM
  • Fieldbus: CANOpen, CAN Layer2, MODBUS, EtherNetIP, da ƙari. Aiwatar da kowane serial RS232/485, TCP/IP, ko CANbus ladabi na ɓangare na uku ta hanyar Mawaƙin Saƙo
  • Na ci gaba: Wakilin SNMP/Tarko, imel, SMS, modem, GPRS/GSM, Abokin ciniki na VNC, Sabar FTP/abokin ciniki
• Software na shirye-shirye
  Duk-in-One software don daidaita kayan masarufi, sadarwa, da aikace-aikacen HMI/PLC, ana samunsu azaman zazzagewa kyauta daga Unitronics.

Teburin Kwatanta

Kafin Ka Fara
Kafin shigar da na'urar, mai amfani dole ne:

• Karanta kuma ku fahimci wannan takarda.
• Tabbatar da Abubuwan da ke cikin Kit.

Alamar Faɗakarwa da Ƙuntatawa Gabaɗaya

Lokacin da ɗayan waɗannan alamomin suka bayyana, karanta bayanan haɗin gwiwa a hankali.

• Duk examples da zane-zane an yi nufin su taimaka fahimta kuma ba su da garantin aiki. Unitronics ba ya karɓar alhakin ainihin amfani da wannan samfurin bisa waɗannan tsoffinamples.
• Da fatan za a zubar da wannan samfurin bisa ga ƙa'idodi da ƙa'idodi na gida da na ƙasa.
• ƙwararrun ma'aikata kawai ya kamata a shigar da wannan samfurin.
• Idan an yi amfani da kayan aikin ta hanyar da masana'anta ba su kayyade ba, kariyar da kayan aikin ke bayarwa na iya lalacewa.
  • Rashin bin ƙa'idodin tsaro masu dacewa na iya haifar da mummunan rauni ko lalacewar dukiya.
  • Kada kayi ƙoƙarin amfani da wannan na'urar tare da sigogi waɗanda suka wuce matakan izini.
  • Kar a haɗa/ cire haɗin na'urar lokacin da wuta ke kunne.

La'akarin Muhalli

• Samun iska: Ana buƙatar sarari 10mm tsakanin saman na'urar / gefuna na ƙasa da bangon shinge
• Kada a sanyawa a cikin wuraren da ke da ƙura mai ƙura ko ƙura, gurɓataccen iska ko mai ƙonewa, danshi ko ruwan sama, zafi mai yawa, girgiza ta yau da kullun, ko firgita mai wuce kima, ta ma'auni da iyakoki da aka bayar a cikin takaddun ƙayyadaddun samfur.
• Kada a sanya a cikin ruwa ko barin ruwa ya zubo kan naúrar.
• Kada ka bari tarkace su fada cikin naúrar yayin shigarwa.
• Sanya a matsakaicin nisa daga babban-voltage igiyoyi da kayan wuta.

Farashin UL

• Sashe mai zuwa ya dace da samfuran Unitronics waɗanda aka jera tare da UL.
• Samfura masu zuwa sune UL-jera don Wurare masu haɗari: US5-B5-B1, US5-B10-B1, US7-B5-B1 da US7-B10-B1
• Samfura masu zuwa an jera UL don Wuraren Talakawa:
  • USL bi -, biye da 050 ko 070 ko 101, biye da B05
  • Amurka ta biyo bayan 5 ko 7 ko 10, biye da -, biye da B5 ko B10 ko C5 ko C10, biye da -, biye da B1 ko TR22 ko T24 ko RA28 ko TA30 ko R38 ko T42.
• Samfuran daga jerin US5, US7, da US10 waɗanda suka haɗa da "T10" ko "T5" a cikin sunan ƙirar sun dace da hawa kan shimfidar shimfidar wuri na Rumbun Nau'in 4X. Domin misaliamples: US7-T10-B1, US7-T5-R38, US5-T10-RA22 and US5-T5-T42.

UL Talakawa Wuri
Don saduwa da daidaitaccen wurin UL na yau da kullun, panel-hana wannan na'urar akan shimfidar shimfidar nau'in 1 ko 4X

Ƙididdigar UL, Masu Gudanar da Shirye-shiryen don Amfani a Wurare masu Haɗari, Class I, Division 2, Rukunin A, B, C da D
Waɗannan Bayanan Bayanin Sakin suna da alaƙa da duk samfuran Unitronics waɗanda ke ɗauke da alamun UL da aka yi amfani da su don yiwa samfuran da aka yarda don amfani a wurare masu haɗari, Class I, Division 2, Rukunin A, B, C da D.

Tsanaki
Wannan kayan aikin ya dace don amfani a cikin Class I, Division 2, Rukunin A, B, C, da D, ko wuraren da ba masu haɗari kawai.

• Wayoyin shigarwa da fitarwa dole ne su kasance ta hanyar Class I, hanyoyin sadarwa na Division 2 kuma ƙarƙashin ikon da ke da iko.
• GARGADI — Fashewa Hazard-masanin abubuwan da aka gyara na iya lalata dacewa ga Class I, Division 2.
• GARGADI – HAZARAR FASHE – Kar a haɗa ko cire haɗin kayan aiki sai dai idan an kashe wuta ko kuma an san wurin ba shi da haɗari.
• GARGADI - Bayyanawa ga wasu sinadarai na iya lalata kaddarorin rufe kayan da ake amfani da su a Relays.
• Dole ne a shigar da wannan kayan aikin ta hanyar amfani da hanyoyin wayoyi kamar yadda ake buƙata don Class I, Division 2 kamar yadda NEC da/ko CEC ke buƙata.

Panel-Mounting
Don masu sarrafa shirye-shirye waɗanda za a iya saka su kuma a kan panel, don saduwa da ma'aunin UL Haz Loc, panel-hana wannan na'urar akan shimfidar shimfidar Nau'in 1 ko Nau'in 4X.

Sadarwa da Ma'ajiyar Ƙwaƙwalwar Cirewa
Lokacin da samfuran suka ƙunshi ko dai tashar sadarwar USB, Ramin katin SD, ko duka biyun, ba ramin katin SD ko tashar USB ba ana nufin haɗa su ta dindindin, yayin da tashar USB an yi niyya don shirye-shirye kawai.

Cire/Masanya baturin

• Lokacin da aka shigar da samfur tare da baturi, kar a cire ko musanya baturin sai dai idan an kashe wuta, ko kuma an san wurin ba shi da haɗari.
• Lura cewa ana ba da shawarar adana duk bayanan da ke cikin RAM, don guje wa asarar bayanai lokacin canza baturi yayin da aka kashe wuta. Hakanan ana buƙatar sake saita bayanan kwanan wata da lokaci bayan aikin.

Abubuwan da ke cikin Kit

• 1 PLC+HMI mai sarrafawa
• 4,8,10 madaurin hawa (US5/US7, US10, US15)
• 1-panel hawa hatimi
• 2 panel yana goyan bayan (US7/US10/US15 kawai)
• 1 toshe tashar wutar lantarki
• 2 I/O tasha tubalan (an samar da kawai tare da samfura da suka ƙunshi ginanniyar I/Os)
• 1 Baturi

Tsarin samfur

Gaba da Baya View

1	Kariyar allo	Ana haɗe takardar filastik zuwa allon don kariya. Cire shi yayin shigarwa na HMI Panel.
2	Murfin baturi	Ana ba da baturin tare da naúrar amma dole ne mai amfani ya shigar dashi.
3	Shigar da Wutar Lantarki	Wurin haɗi don tushen wutar lantarki. Haɗa Tasha Block ɗin da aka kawo tare da kit zuwa ƙarshen kebul na wutar lantarki.
4	microSD Slot	Yana goyan bayan daidaitattun katunan microSD.
5	USB Mai watsa shiri tashar jiragen ruwa	Yana ba da hanyar dubawa don na'urorin USB na waje.
6	Ethernet tashar jiragen ruwa	Yana goyan bayan sadarwar Ethernet mai sauri.
7	Na'urar USB	Yi amfani don zazzage aikace-aikacen da sadarwar PC-UniStream kai tsaye.
8	I/O Expansion Jack	Wurin haɗi don I/O Expansion Port. Ana ba da tashoshin jiragen ruwa a matsayin wani ɓangare na I/O Expansion Model Kits. Kits suna samuwa ta tsari daban. Lura cewa UniStream® Gina-in yana dacewa da adaftar kawai daga jerin UAG-CX.
9	Audio Jack	Samfuran Pro kawai. Wannan 3.5mm Audio jack yana ba ku damar haɗa kayan sauti na waje.
10	I/O da aka gina a ciki	Dogaro da samfuri. Gabatar da samfura tare da ginannen tsarin I/O.
11	Uni-COM™ CX Module Jack	Ma'anar haɗin kai don har zuwa 3 stack-on modules. Ana samun waɗannan a cikin wani tsari dabam.
12	UAG-BACK-IOADP Adaftan Jack	Matsayin haɗin kai don ɗaukar kan panel don daidaitawar duk-cikin-ɗaya. Ana samun adaftar ta hanyar daban.

La'akari da Shigarwa Space

Ware sarari don:

• mai kula
• kowane modules da za a shigar
• samun damar zuwa tashar jiragen ruwa, jacks, da ramin katin microSD

Don ainihin ma'auni, da fatan za a koma zuwa Ma'aunin Injini wanda aka nuna a ƙasa.

Girman Injini

NOTE
Bada sarari don samfura don ɗauka a bayan mai sarrafawa idan aikace-aikacenku ya buƙaci. Modules suna samuwa a cikin tsari daban.

Ruwa na Panel

NOTE

• Dole ne kauri mai hawa ya zama ƙasa ko daidai da 5mm (0.2").
• Tabbatar cewa an cika la'akarin sararin samaniya.

1. Shirya yanke-tsalle bisa ga girman kamar yadda aka nuna a sashin da ya gabata.
2. Zamar da mai sarrafawa cikin yanke, tabbatar da cewa Hatimin Dutsen Panel yana nan kamar yadda aka nuna a ƙasa.
3. Tura maƙallan masu hawa cikin ramummukan su a gefen panel kamar yadda aka nuna a ƙasa.
4. Matsa madaidaicin sukurori a kan panel. Riƙe maƙallan amintacce a kan naúrar yayin daɗa sukurori. Ƙarfin da ake buƙata shine 0.35 N·m (3.1 in-lb).

Lokacin da aka ɗora shi da kyau, panel ɗin yana nan daidai a cikin yanke panel kamar yadda aka nuna a ƙasa.

Tsanaki
Kar a yi amfani da karfin juzu'i da ya wuce 0.35 N·m (3.1 in-lb) na karfin juyi don matsar da madaidaitan sukurori. Yin amfani da ƙarfi fiye da kima don ɗaure dunƙule na iya lalata wannan samfur.

Baturi: Ajiye, Amfani na Farko, Shigarwa, da Sauyawa

Ajiyayyen
Don adana ƙimar maajiyar RTC da bayanan tsarin a yayin da aka kashe wuta, dole ne a haɗa baturin.

Amfani na Farko

• Ana kiyaye baturin ta murfin mai cirewa a gefen mai sarrafawa.
• Ana ba da baturi kuma an shigar da shi a cikin naúrar, tare da shafin filastik yana hana tuntuɓar wanda mai amfani ya cire.

Shigar Baturi da Sauyawa
Yi amfani da matakan da suka dace don hana fitarwar lantarki (ESD) yayin hidimar baturi.

Tsanaki

• Don adana ƙimar ajiyar kuɗi don RTC da bayanan tsarin yayin maye gurbin baturi, dole ne a kunna mai sarrafawa.
• Lura cewa cire haɗin baturin yana dakatar da adana ƙimar madadin kuma yana sa a goge su.

1. Cire murfin baturin daga mai sarrafawa kamar yadda aka nuna a cikin adadi mai rahusa: – Latsa shafin kan tsarin don cire shi. – Zamar da shi sama don cire shi.
2. Idan kana maye gurbin baturin, cire baturin daga ramin sa a gefen mai sarrafawa.
3. Saka baturin, tabbatar da cewa polarity ya daidaita tare da alamar polarity kamar yadda aka nuna a cikin hoton da ke biye.
4. Sauya murfin baturin.
5. Zubar da baturin da aka yi amfani da shi bisa ga ƙa'idodi da ƙa'idodi na gida da na ƙasa.

Waya

• An tsara wannan kayan aikin don yin aiki kawai a SELV/PELV/Class 2/ Iyakantaccen Wutar Wuta.
• Duk kayan wutar lantarki a cikin tsarin dole ne su haɗa da rufi biyu. Dole ne a ƙididdige abubuwan samar da wutar lantarki azaman SELV/PELV/Class 2/Iyakantaccen Ƙarfi.
• Kar a haɗa ko dai siginar 'Neutral' ko 'Layi' na 110/220VAC zuwa wurin 0V na na'urar.
• Kar a taɓa wayoyi masu rai.
• Duk ayyukan wayoyi yakamata a yi su yayin da wuta ke KASHE.
• Yi amfani da kariya ta yau da kullun, kamar fuse ko na'urar kewayawa, don guje wa wuce gona da iri zuwa wurin haɗin wutar lantarki.
• Ba za a haɗa wuraren da ba a yi amfani da su ba (sai dai idan an ƙayyade). Yin watsi da wannan umarnin na iya lalata na'urar.
• Bincika duk wayoyi sau biyu kafin kunna wutar lantarki.

Tsanaki

• Don guje wa lalata wayar, yi amfani da matsakaicin karfin juyi na 0.5 N·m (4.4 in-lb).
• Kada a yi amfani da gwangwani, solder, ko wani abu akan fitaccen waya wanda zai iya sa igiyar waya ta karye.
• Waya da kebul ya kamata su sami ƙimar zafin jiki mafi ƙarancin 75 ° C.
• Sanya a matsakaicin nisa daga babban-voltage igiyoyi da kayan wuta.

Tsarin Waya
Yi amfani da crimp tashoshi don wayoyi; amfani da 26-12 AWG waya (0.13 mm2 -3.31 mm2)

• Cire waya zuwa tsayin 7± 0.5mm (0.250-0.300 inci).
• Cire tashar zuwa mafi girman matsayi kafin saka waya.
• Saka waya gaba daya a cikin tashar don tabbatar da haɗin kai mai kyau.
• Maƙarƙashiya don kiyaye waya daga ja kyauta.

Ka'idojin Waya
Don tabbatar da cewa na'urar za ta yi aiki da kyau kuma don guje wa tsangwama na lantarki:

• Yi amfani da kabad ɗin ƙarfe. Tabbatar cewa majalisar ministoci da kofofinta suna da ƙasa yadda ya kamata.
• Yi amfani da wayoyi waɗanda girmansu ya dace don kaya.
• Yi amfani da igiyoyi masu murɗaɗɗen garkuwa don haɗa High Speed ​​da Analog I/O sigina. A kowane hali, kar a yi amfani da garkuwar kebul azaman sigina gama gari/hanyar dawowa.
• Hanya kowace siginar I/O tare da keɓewar waya ta gama gari. Haɗa wayoyi gama gari a wuraren gama-gari nasu (CM) a mai sarrafawa.
• Haɗa kowane maki 0V da kowane ma'ana gama gari (CM) a cikin tsarin zuwa tashar wutar lantarki ta 0V, sai dai in an ƙayyade.
• Haɗa kowane madaidaicin wurin ƙasa mai aiki () zuwa ga ƙasa na tsarin (zai fi dacewa da karfe katako chassis). Yi amfani da wayoyi mafi guntu kuma mafi kauri mai yuwuwa: ƙasa da 1m (3.3') tsayi, ƙaramin kauri 14 AWG (2 mm2).
• Haɗa wutar lantarki 0V zuwa ƙasa na tsarin.

Ƙaddamar da garkuwar igiyoyi:

• Haɗa garkuwar kebul zuwa ƙasan tsarin (zai fi dacewa zuwa chassis ɗin ƙarfe). Lura cewa dole ne a haɗa garkuwar a ɗaya ƙarshen kebul; ana ba da shawarar ƙasa garkuwa a gefen PLC.
• Rike haɗin garkuwa gajarta sosai.
• Tabbatar da ci gaban garkuwa lokacin da ke shimfida igiyoyin kariya.

NOTE
Don cikakkun bayanai, koma zuwa daftarin Jagororin Waya Wuta, wanda ke cikin Laburaren Fasaha akan Unitronics' website.

Wayar da Wutar Lantarki
Mai sarrafawa yana buƙatar wutar lantarki ta waje.

• A cikin lamarin voltage sauye-sauye ko rashin daidaituwa ga voltage Ƙayyadaddun wutar lantarki, haɗa na'urar zuwa tsarin samar da wutar lantarki.

Haɗa tashoshi + V da 0V kamar yadda aka nuna a hoton da ke gaba.

Haɗa Tashoshi

• Ethernet
  CAT-5e mai kariya na USB tare da haɗin RJ45
• Na'urar USB
  Daidaitaccen kebul na USB tare da filogi na USB Mini-B (USC-C plugin US15)
• USB Mai watsa shiri
  Daidaitaccen na'urar USB mai nau'in-A

Haɗa Audio

Audio-Fita
Yi amfani da filogi na sitiriyo na mm 3.5 tare da kebul mai jiwuwa mai kariya Lura cewa samfuran Pro kawai ke goyan bayan wannan fasalin.

Audio Pinout

1. Hagu na lasifikan kai (Tip)
2. Lasifikan kunne Dama Fita (Ring)
3. Kasa (Zobe)
4. Kar a haɗa (Sleeve)

Lura cewa a ƙasa, harafin "xx" da aka yi amfani da shi a cikin lambobin ƙirar yana nufin cewa sashin yana nufin duka biyu zuwa nau'in B5/C5 da B10/C10.

• US5 -xx-TR22, US5-xx-T24
• US7-xx-TR22, US7-xx-T24
• US10 -xx-TR22, US10-xx-T24

Abubuwan Haɗin I/O
An tsara IOs na waɗannan samfuran a rukuni biyu na maki goma sha biyar kowanne, kamar yadda aka nuna a cikin alkaluman dama.

Babban rukuni
Abubuwan haɗin shigarwa

Ƙungiya ta ƙasa
Abubuwan haɗin da aka fitar

Ana iya daidaita aikin wasu I/Os ta hanyar wayoyi da saitunan software.

Wayar da Abubuwan Abubuwan Dijital
Duk abubuwan shigar dijital guda 10 suna raba ma'ana gama gari CM0. Ana iya haɗa abubuwan shigar da dijital tare azaman nutse ko tushe.

NOTE
Yi amfani da na'urar shigar da sink don haɗa na'urar samowa (pnp). Yi amfani da hanyar shigar da wayoyi don haɗa na'urar nutsewa (npn).

Shigar da Abubuwan Analog
Duk abubuwan da aka shigar suna raba ma'ana gama gari CM1.

NOTE

• Abubuwan shigar ba su keɓanta ba.
• Kowace shigarwa tana ba da hanyoyi biyu: voltage ko halin yanzu. Kuna iya saita kowace shigarwa da kanta.
• An ƙayyade yanayin ta hanyar daidaitawar hardware a cikin aikace-aikacen software.
• Lura cewa idan, ga exampHar ila yau, kuna waya da shigarwar zuwa halin yanzu, dole ne ku saita shi zuwa halin yanzu a cikin aikace-aikacen software.

Wayar da Fitilar Relay (US5-xx-TR22, US7-xx-TR22, US10-xx-TR22)
Don guje wa haɗarin gobara ko lalacewar dukiya, koyaushe yi amfani da ƙayyadaddun tushe na yanzu ko haɗa na'urar iyakance na yanzu a cikin jerin tare da lambobin sadarwa na relay.

An tsara abubuwan da aka fitar a keɓance ƙungiyoyi biyu:

• O0-O3 suna raba dawowar gama gari CM2.
• O4-O7 ya raba CM3 gama gari.

Ƙara Tsawon Rayuwar Sadarwa
Don ƙara tsawon rayuwar lambobin sadarwa da kuma kare mai sarrafawa daga yuwuwar lalacewa ta hanyar juyawa EMF, haɗa:

• da clamping diode a layi daya tare da kowane inductive DC load,
• a RC snubber circuit a layi daya tare da kowane inductive AC lodi

Wayar da Fitowar Taransistor na Sink
(US5-xx-TR22, US7-xx-TR22, US10-xx-TR22)

• Haɗa na'urar ƙayyadaddun ƙayyadaddun lokaci a jere tare da abubuwan da aka fitar O8 da O9. Waɗannan abubuwan fitowar ba su da kariya ta gajeriyar kewayawa.
• Ana iya daidaita abubuwan da aka fitar da O8 da O9 da kansu azaman ko dai na yau da kullun na dijital ko azaman kayan aikin PWM mai sauri.
• Abubuwan da aka fitar O8 da O9 suna raba ma'ana gama gari CM4.

Wayar da Fitar da Tushen Transistor
(US5-xx-T24, US7-xx-T24, US10-xx-T24)

• Fitar da wutar lantarki
  Yin amfani da kowane ɗayan abubuwan da ake fitarwa yana buƙatar samar da wutar lantarki ta 24VDC ta waje kamar yadda aka nuna a cikin adadi mai rakiyar.
• Abubuwan da aka fitar
  • Haɗa tashoshin + VO da 0VO kamar yadda aka nuna a hoton da ke gaba.
  • O0-O11 rabo na gama gari 0VO.

Sanya Uni-I/O™ & Uni-COM™ Modules
Koma zuwa jagororin shigarwa da aka bayar tare da waɗannan samfuran.

• Kashe wutar tsarin kafin haɗi ko cire haɗin kowane kayayyaki ko na'urori.
• Yi amfani da matakan da suka dace don hana fitarwar electrostatic (ESD).

Cire Mai Kulawa

1. Cire haɗin wutar lantarki.
2. Cire duk wayoyi kuma cire haɗin kowane na'ura da aka shigar bisa ga jagorar shigarwa na na'urar.
3. Cire kuma cire ɓangarorin hawa, kula da tallafawa na'urar don hana ta faɗuwa yayin wannan aikin.

Bayanan da ke cikin wannan takarda yana nuna samfurori a ranar bugawa. Unitronics yana da haƙƙi, ƙarƙashin duk dokokin da suka dace, a kowane lokaci, bisa ga ra'ayin sa, kuma ba tare da sanarwa ba, don dakatarwa ko canza fasali, ƙira, kayan aiki, da sauran ƙayyadaddun samfuransa, da kuma ko dai na dindindin ko na ɗan lokaci cire duk wani abu daga kasuwa. Duk bayanan da ke cikin wannan takarda an bayar da su “kamar yadda yake” ba tare da garanti na kowane iri ba, ko dai bayyana ko bayyanawa, gami da amma ba'a iyakance ga kowane takamaiman garanti na kasuwanci ba, dacewa don wata manufa, ko rashin cin zarafi. Unitronics ba shi da alhakin kurakurai ko rashi a cikin bayanan da aka gabatar a cikin wannan takaddar. Babu wani yanayi da Unitronics zai zama abin dogaro ga kowane na musamman, na bazata, kaikaice, ko lahani na kowane iri, ko duk wani lahani da ya taso daga ko dangane da amfani ko aikin wannan bayanin. Sunayen kasuwanci, alamun kasuwanci, tambura, da alamun sabis da aka gabatar a cikin wannan takaddar, gami da ƙirar su, mallakar Unitronics (1989) (R”G) Ltd. ko wasu ɓangarori na uku kuma ba a ba ku izinin amfani da su ba tare da rubutaccen izinin Unitronics ko wani ɓangare na uku wanda zai iya mallake su.

Ƙididdiga na Fasaha

• US5-B5-B1, US5-B10-B1, US5-B5-TR22, US5-B10-TR22, US5-B5-T24, US5-B10-T24, US5-C5-B1, US5-C10-B1, US5-C5-TR22, US5-C10-TR22, US5-C5-T24, US5-C10-T24
• US7-B5-B1, US7-B10-B1, US7-B5-TR22, US7-B10-TR22, US7-B5-T24, US7-B10-T24, US7-C5-B1, US7-C10-B1, US7-C5-TR22, US7-C10-TR22, US7-C5-T24, US7-C10-T24
• US10-B5-B1, US10-B10-B1, US10-B5-TR22, US10-B10-TR22, US10-B5-T24, US10-B10-T24, US10-C5-B1, US10-C10-B1, US10-C5-TR22, US10-C10-TR22, US10-C5-T24, US10-C10-T24
• US15-B10-B1, US15-C10-B1

Unitronics'UniStream® Jerin da aka Gina sune PLC+HMI Duk-in-Daya masu sarrafa shirye-shirye waɗanda suka ƙunshi ginanniyar HMI da ginanniyar I/Os. UniStream yana haɗa kai tsaye zuwa UniCloud, Unitronics'IIoT dandali na girgije ta amfani da ginanniyar haɗin UniCloud. Ana samun ƙarin bayani game da UniCloud a www.unitronics.cloud.

Lambobin samfuri a cikin wannan takaddar

Ana samun Jagoran shigarwa a cikin Laburaren Fasaha na Unitronic a www.unitronicsplc.com.

Tushen wutan lantarki		USx-xx-B1	USx-xx-TR22	USx-xx-T24
Shigar da kunditage		12VDC ko 24VDC	Saukewa: 24VDC	Saukewa: 24VDC
Kewayon halatta		10.2VDC zuwa 28.8VDC	20.4VDC zuwa 28.8VDC	20.4VDC zuwa 28.8VDC
Max. halin yanzu cin abinci	US5	0.7A @ 12VDC 0.4A @ 24VDC	0.44A @ 24VDC	0.4A @ 24VDC
	US7	0.79A @ 12VDC 0.49A @ 24VDC	0.53A @ 24VDC	0.49A @ 24VDC
	US10	0.85A @ 12VDC 0.52A @ 24VDC	0.56A @ 24VDC	0.52A @ 24VDC
	US15	2.2A @ 12VDC 1.1A @ 24VDC	Babu	Babu
Kaɗaici		Babu

Nunawa	UniStream 5 ″	UniStream 7 ″	UniStream 10.1 ″	UniStream 15.6 ″
Nau'in LCD	TFT
Nau'in haske	Farin LED
Ƙarfin haske (haske)	Yawanci 350 nits (cd/m2), a 25°C	Yawanci 400 nits (cd/m2), a 25°C	Yawanci 300 nits (cd/m2), a 25°C	Yawanci 400 nits (cd/m2), a 25°C
Hasken baya tsawon rai (1)	awa 30k
Resolution (pixels)	800x480 (WVGA)		1024 x 600 (WSVGA)	1366 x 768 (HD)
Girman	5”	7"	10.1"	15.6”
Viewyanki	Nisa x Tsawo (mm) 108 x 64.8	Nisa x Tsawo (mm) 154.08 x 85.92	Nisa x Tsawo (mm) 222.72 x 125.28	Nisa x Tsawo (mm) 344.23 x 193.53
Taimakon launi	65,536 (16bit)
Maganin saman	Anti-glare
Kariyar tabawa	Resistive Analog
Ƙarfin kunnawa (minti)	80 g (0.176 lb)

Gabaɗaya
I/O goyon baya	Har zuwa maki 2,048 I/O
I/O da aka gina a ciki	A cewar samfurin
Fadada I/O na gida	Don ƙara I/Os na gida, yi amfani da UAG-CX I/O Expansion Adapters (2). Waɗannan adaftan suna ba da wurin haɗin kai don daidaitattun samfuran UniStream UniStream Uni-I/O™. Kuna iya haɗa har zuwa 80 I/O modules zuwa mai sarrafawa guda ɗaya ta amfani da waɗannan adaftan. US15 kawai - Haɗa I/O a cikin tsarin ku ta amfani da adaftar UAG-BACK-IOADP, kuma danna kan panel don daidaitawar duk-cikin-ɗaya.
I/O mai nisa	Har zuwa 8 UniStream Adaftar I/O Nesa (URB)
Tashoshin sadarwa
Gina-in tashoshi na COM	An bayar da ƙayyadaddun bayanai a ƙasa a cikin sashin Sadarwa
Ƙara-on Tashoshi	Ƙara har zuwa tashoshin jiragen ruwa 3 zuwa mai sarrafawa guda ɗaya ta amfani da Uni-COM™ UAC-CX Modules (3).

Ƙwaƙwalwar ciki	Daidaitaccen (B5/C5)	Pro (B10/C10)
	RAM: 512MB ROM: 3GB memory memory 1GB mai amfani	RAM: 1 GB ROM: 6GB memory memory 2GB mai amfani
Ƙwaƙwalwar tsani	1 MB

Ƙwaƙwalwar waje	microSD ko katin microSDHC Girman: har zuwa 32GB, Gudun bayanai: har zuwa 200Mbps
Bit aiki	0.13 µs
Baturi	Model: 3V CR2032 baturi Lithium (4) Rayuwar baturi: shekaru 4 na al'ada, a 25°C Ƙananan gano baturi da nuni (ta hanyar HMI da Tsarin Tag).

Audio (samfurin Pro B10/C10 kawai)
Bit Rate	192kbps
Daidaituwar sauti	Sitiriyo MP3 files
Interface	3.5mm Audio-out Jack - Yi amfani da kebul mai kariya mai kariya har zuwa 3 m (9.84 ft)
Impedance	16Ω, 32Ω
Kaɗaici	Babu

Bidiyo (samfurin Pro B10/C10 kawai)
Formats masu goyan baya	MPEG-4 Visual , AVC/H.264

Sadarwa (Gidan Tashoshi)	US5, US7, US10	US15
Ethernet tashar jiragen ruwa
Yawan tashoshin jiragen ruwa	1	2
Nau'in tashar jiragen ruwa	10/100 Base-T (RJ45)
Mota crossover	Ee
Tattaunawa ta atomatik	Ee
Kadaici voltage	500VAC na minti 1
Kebul	Kebul na CAT5e mai kariya, har zuwa 100m (328 ft)
Na'urar USB
Nau'in tashar jiragen ruwa	Mini-B	USB-C
Adadin bayanai	USB 2.0 (480Mbps)
Kaɗaici	Babu
Kebul	USB 2.0 mai jituwa; <3 m (9.84 ft)
USB mai masaukin baki
Sama da kariya ta yanzu	Ee

Abubuwan shigar da Dijital (T24, TR22 samfuri)
Yawan bayanai	10
Nau'in	Zuciya ko Source
Kadaici voltage
Shigar da bas	500VAC na minti 1
Shigarwa don shigarwa	Babu
Nunanan voltage	24VDC @ 6mA
Shigar da kunditage
Tushe/Madogararsa	Kan Jiha: 15-30VDC, 4mA min. Kashe jihar: 0-5VDC, 1mA max.
Ƙunƙarar ƙima	4 kΩ
Tace	6ms hankula

Analog Inputs (T24, TR22 model)
Yawan bayanai	2
Kewayon shigarwa (6) (7)	Nau'in shigarwa	Dabi'u Mara Lafiya	Ƙimar da ke kan iyaka *
	0 ÷ 10VDC	0 ≤ Vin ≤ 10VDC	10 <Vin ≤ 10.15VDC

	0 ÷ 20mA		0 ≤ Ina ≤ 20mA			20 <In ≤ 20.3mA
	* Magudanar ruwa (8) an ayyana lokacin da ƙimar shigarwa ta wuce iyakar iyaka.
Cikakkar matsakaicin kimantawa	± 30V (Voltage), ± 30mA (Yanzu)
Kaɗaici	Babu
Hanyar juyawa	Matsakaicin nasara
Ƙaddamarwa	12 bits
Daidaito (25°C/-20°C zuwa 55°C)	± 0.3% / ± 0.9% na cikakken sikelin
Input impedance	541kΩ (Juzu'itage), 248Ω (Yanzu)
Kin amincewa da surutu	10Hz, 50Hz, 60Hz, 400Hz
Amsa mataki (9) (0 zuwa 100% na ƙimar ƙarshe)	Lallashi	Mitar kin Hayaniyar
		400Hz		60Hz	50Hz		10Hz
	Babu	2.7ms		16.86ms	20.2ms		100.2ms
	Mai rauni	10.2ms		66.86ms	80.2ms		400.2ms
	Matsakaici	20.2ms		133.53ms	160.2ms		800.2ms
	Mai ƙarfi	40.2ms		266.86ms	320.2ms		1600.2ms

Lokacin sabuntawa (9)	Mitar kin Hayaniyar	Lokacin Sabuntawa
	400Hz	5ms
	60Hz	4.17ms
	50Hz	5ms
	10Hz	10ms
Kewayon siginar aiki (sigina + yanayin gama gari)	Voltage yanayin - AIx: -1V ÷ 10.5V; CM1: -1V ÷ 0.5V Yanayin Yanzu - AIx: -1V ÷ 5.5V; CM1: -1V ÷ 0.5V (x=0 ko 1)
Kebul	Garkuwar murƙushe biyu
Bincike (8)	Shigarwar Analog ya cika

Abubuwan da aka fitar (USx-xx-TR22)
Yawan abubuwan da aka fitar	8 (O0 zuwa O7)
Nau'in fitarwa	Relay, SPST-NO (Form A)
Ƙungiyoyin ware	Rukunoni biyu na fitar da abubuwa 4 kowanne
Kadaici voltage
Rukuni zuwa bas	1,500VAC na minti 1
Rukuni zuwa rukuni	1,500VAC na minti 1
Fitowa don fitarwa a cikin rukuni	Babu
A halin yanzu	2A matsakaicin kowane fitarwa (Load mai juriya)
Voltage	250VAC / 30VDC mafi girma
Mafi ƙarancin kaya	1mA, 5VDC
Lokacin sauyawa	10ms mafi girma
Kariyar gajeriyar hanya	Babu
Tsawon rayuwa (10)	Ayyukan 100k a matsakaicin nauyi

Abubuwan da ake fitarwa na Transistor (USx-xx-TR22)
Yawan abubuwan da aka fitar	2 (O8 da O9)
Nau'in fitarwa	Transistor, Sink
Kaɗaici
Fitowa zuwa bas	1,500VAC na minti 1
Fitowa zuwa fitarwa	Babu
A halin yanzu	50mA max. kowace fitarwa
Voltage	Lambar waya: 24VDC Matsakaicin iyaka: 3.5V zuwa 28.8VDC
On-jihar voltagda drop	Max 1V
yoyon waje na halin yanzu	10µA max
Lokutan sauyawa	Kunnawa: 1.6ms max. ) 4kΩ kaya, 24V) Kashe: 13.4ms max. 4kΩ kaya, 24V)
Abubuwan fitarwa mai sauri
Yanayin PWM	0.3 Hz min. 30kHz max. 4kΩ kaya
Kebul	Garkuwar murƙushe biyu

Tushen Transistor Outputs (USx-xx-T24)
Yawan abubuwan da aka fitar	12
Nau'in fitarwa	Transistor, Source (pnp)
Kadaici voltage
Fitowa zuwa bas	500VAC na minti 1
Fitowa zuwa fitarwa	Babu
Fitar da wutar lantarki zuwa bas	500VAC na minti 1
Fitar da wutar lantarki zuwa fitarwa	Babu
A halin yanzu	0.5A matsakaicin kowane fitarwa
Voltage	Dubi ƙayyadaddun abubuwan samar da wutar lantarki na Tushen Transistor a ƙasa
ON jihar voltagda drop	0.5V mafi girma
KASHE-jihar zubewar halin yanzu	10µA matsakaicin
Lokutan sauyawa	Kunnawa: Matsakaicin 80ms, Kashewa: Matsakaicin 155ms (Juriyawar Load <4kΩ(
Mitar PWM (11)	O0, O1: 3kHz max. (Load juriya <4kΩ)
Kariyar gajeriyar hanya	Ee

Samar da Wutar Lantarki na Tushen Transistor (USx-xx-T24)
Sunan aiki voltage	Saukewa: 24VDC
Ƙa'idar aikitage	20.4-28.8VDC
Matsakaicin amfani na yanzu	30mA @ 24VDC Amfani na yanzu baya haɗa da kayan aiki na yanzu

Muhalli	US5, US7, US10	US15
Kariya	Fuskar gaba: IP66, NEMA 4X Na baya: IP20, NEMA1
Yanayin aiki	-20°C zuwa 55°C (-4°F zuwa 131°F)	0°C zuwa 50°C (32°F zuwa 122°F)
Yanayin ajiya	-30°C zuwa 70°C (-22°F zuwa 158°F)	-20°C zuwa 60°C (-4°F zuwa 140°F)
Dangantakar Humidity (RH)	5% zuwa 95% (ba mai tauri)
Tsayin Aiki	2,000m (6,562 ft)
Girgiza kai	IEC 60068-2-27, 15G, tsawon 11ms
Jijjiga	IEC 60068-2-6, 5Hz zuwa 8.4Hz, 3.5mm akai-akai amplitude, 8.4Hz zuwa 150Hz, 1G hanzari

Girma
	Nauyi	Girman
US5-xx-B1	0.31 Kg (0.68 laba)	Koma zuwa hotuna UniStream 5" UniStream 7" UniStream 10.1"
US5-xx-TR22	0.37 Kg (0.81 laba)
US5-xx-T24	0.35 Kg (0.77 laba)
US7-xx-B1	0.62 Kg (1.36 laba)	Koma zuwa hotuna UniStream 15.6"
US7-xx-TR22	0.68 Kg (1.5 laba)
US7-xx-T24	0.68 Kg (1.5 laba)
US10-xx-B1	1.02 Kg (2.25 laba)	Koma zuwa hotuna UniStream 15.6"
US10-xx-TR22	1.08 Kg (2.38 laba)
US10-xx-T24	1.08 Kg (2.38 laba)
US15-xx-B1	2.68Kg (5.9 laba)

Muhimman Bayanan kula

1. Tsawon tsawon hasken baya na kwamitin HMI shine lokacin aiki na yau da kullun bayan haka hasken ya faɗi zuwa 50% na ainihin matakinsa.
2. UAG-CX Expansion Adapter Kits sun ƙunshi rukunin Tushe, ƙungiyar Ƙarshe, da kebul na haɗi. Kuna toshe Rukunin Tushen a cikin I/O Expansion Jack mai sarrafawa kuma ku haɗa daidaitattun abubuwan UniStream Uni-I/O™. Don ƙarin bayani, koma zuwa jagorar shigarwa na samfur da ƙayyadaddun fasaha.
3. Uni-COM™ CX kayayyaki suna toshe kai tsaye cikin Uni-COM™ CX Module Jack a bayan mai sarrafawa. UAC-CX kayayyaki za a iya shigar a cikin wadannan jeri: - Idan wani module dauke da serial tashar jiragen ruwa aka snapped kai tsaye a cikin baya na UniStream, shi za a iya bi kawai da wani serial module, domin jimlar 2. - Idan your sanyi hada da wani CANbus module, shi dole ne a snapped kai tsaye zuwa baya na UniStream. Za'a iya bin diddigin canbus na iya biyo bayan mawuyacin serial, na jimlar 3. Don ƙarin bayani, yana magana da tsarin shigarwa na samfurin.
4. Lokacin maye gurbin baturin naúrar, tabbatar da cewa sabon yana da ƙayyadaddun muhalli waɗanda suka yi kama da ko mafi kyau fiye da wanda aka ƙayyade a cikin wannan takaddar.
5. Ana amfani da tashar USB na na'urar don haɗa na'urar zuwa PC.
6. Ana aiwatar da zaɓin shigarwar 4-20mA ta amfani da kewayon shigarwar 0-20mA.
7. Abubuwan shigar da analog ɗin suna auna ƙimar da suka ɗan fi tsayi fiye da kewayon shigar da ƙima (Input Over-ke).
   Lura cewa lokacin da abin shigar da bayanai ya auku, ana nuna shi a daidai matsayin I/O tag yayin da aka yi rajistar ƙimar shigarwa azaman matsakaicin ƙimar da aka halatta. Don misaliample, idan ƙayyadadden kewayon shigarwar ya kasance 0 ÷ 10V, ƙimar sama-sama za ta iya kaiwa zuwa 10.15V, kuma kowane shigarwar vol.tage sama da hakan har yanzu zai yi rajista azaman 10.15V yayin da tsarin wuce gona da iri tag an kunna.
8. Ana nuna sakamakon binciken a cikin tsarin tags kuma ana iya lura da su ta hanyar UniApps™ ko yanayin kan layi na UniLogic™.
9. Amsa mataki da lokacin ɗaukaka sun kasance masu zaman kansu daga adadin tashoshi da ake amfani da su.
10. Tsawon rayuwa na lambobin sadarwa na relay ya dogara da aikace-aikacen da aka yi amfani da su a ciki. Jagoran shigarwa na samfurin yana ba da hanyoyin yin amfani da lambobin sadarwa tare da dogayen igiyoyi ko tare da kayan aiki masu haɓakawa.
11. Ana iya saita abubuwan da aka fitar O0 da O1 azaman ko dai na yau da kullun na dijital ko azaman abubuwan PWM. Ƙayyadaddun abubuwan fitarwa na PWM suna aiki ne kawai lokacin da aka saita abubuwan da aka fitar azaman abubuwan PWM.

Bayanan da ke cikin wannan takarda yana nuna samfurori a ranar bugawa. Unitronics yana da haƙƙi, ƙarƙashin duk dokokin da suka dace, a kowane lokaci, bisa ga ra'ayin sa, kuma ba tare da sanarwa ba, don dakatarwa ko canza fasali, ƙira, kayan aiki, da sauran ƙayyadaddun samfuransa, da kuma ko dai na dindindin ko na ɗan lokaci cire duk wani abu daga kasuwa. Duk bayanan da ke cikin wannan takarda an bayar da su “kamar yadda yake” ba tare da garanti na kowane iri ba, ko dai bayyana ko bayyanawa, gami da amma ba'a iyakance ga kowane takamaiman garanti na kasuwanci ba, dacewa don wata manufa, ko rashin cin zarafi. Unitronics ba shi da alhakin kurakurai ko rashi a cikin bayanan da aka gabatar a cikin wannan takaddar. Babu wani yanayi da Unitronics zai zama abin dogaro ga kowane na musamman, na bazata, kaikaice, ko lahani na kowane iri, ko duk wani lahani da ya taso daga ko dangane da amfani ko aikin wannan bayanin. Sunayen kasuwanci, alamun kasuwanci, tambura, da alamun sabis da aka gabatar a cikin wannan takaddar, gami da ƙirar su, mallakar Unitronics (1989) (R”G) Ltd. ko wasu ɓangarori na uku kuma ba a ba ku izinin amfani da su ba tare da rubutaccen izinin Unitronics ko wani ɓangare na uku wanda zai iya mallake su.

Takardu / Albarkatu

Unitronics US5-B5-B1 Ƙarfin Mai Gudanar da Dabarun Shirye-shiryen [pdf] Jagorar mai amfani US5-B5-B1, US5-B10-B1, US5-B5-TR22, US5-B10-TR22, US5-B5-T24, US5-B10-T24, US5-C5-B1, US5-C10-B1, US5- C5-TR22, US5-C10-TR22, US5-C5-T24, US5-C10-T24, US7-B5-B1, US7-B10-B1, US7-B5-TR22, US7-B10-TR22, US7-B5- T24, US7-B10-T24, US7-C5-B1, US7-C10-B1, US7-C5-TR22, US7-C10-TR22, US7-C5-T24, US7-C10-T24, US10-B5-B1, US10, US5-B5-B1 Mai sarrafa Ma'auni mai ƙarfi, US5-B5-B1.

Magana

• Manual mai amfani