unitronics Vision PLC+HMI Mai sarrafa Logic Controller

Vision™ PLC+HMI Jagorar mai amfani

Vision™ PLC+HMI	Jagorar Mai Amfani
V130-33-RA22/V130-J-RA22 V350-35-RA22/V350-J-RA22 V430-J-RA22	§ Abubuwan shigar da dijital guda 12, gami da 1 HSC/Masu shigar-rubutun-Shaft, 2 Analog, 2 PT100/TC bayanai
	§ 8 Relay Fitarwa	§ 2 Abubuwan Analog
V130-33-TRA22/V130-J-TRA22 V350-35-TRA22/V350-J-TRA22 V430-J-TRA22	§ Abubuwan shigar da Dijital 12, gami da 1 HSC/Shaft-encoder Inputs, 2 Analog Inputs, 2 PT100/TC bayanai
	§ 4 Relay Fitarwa	§ 2 Abubuwan Analog
	§ 4 high-gudun npn Transistor Outputs

Babban Bayani

Samfuran da aka jera a sama su ne micro-PLC+HMIs, masu sarrafa dabaru masu ƙarfi waɗanda suka ƙunshi ginanniyar fatunan aiki.
Cikakkun jagororin shigarwa waɗanda ke ƙunshe da zane-zanen wayoyi na I/O don waɗannan samfuran, ƙayyadaddun fasaha, da ƙarin takaddun suna cikin Laburaren Fasaha a cikin Unitronics website: https://unitronicsplc.com/support-technical-library/

Abu	Saukewa: V130-RA22	V130-TRA22 V130J-TRA22	Saukewa: V350-RA22	V350-TRA22 V350J-TRA22	V430J-RA22 V430J-TRA22
Kan-jirgin I/O	Model Dogara
Allon	2.4"		3.5 ″ Taɓawar Launi		4.3 ″ Taɓawar Launi
faifan maɓalli	Ee		Babu
Maɓallan Aiki	Babu		Ee
Com Port, Gina-in
Saukewa: RS232/485	Ee	Ee	iya*	iya*	iya*
Na'urar USB, mini-B	Babu	Babu	iya*	iya*	iya*
Com Ports, oda daban, mai amfani ya shigar	Mai amfani na iya shigar da tashar CANbus (V100-17-CAN), kuma daya daga cikin wadannan: ·          RS232/RS485 port (V100-17-RS4/V100-17-RS4X) Ethernet (V100-17-ET2) Bawan Mai Riba (V100-17-PB1)
* V430J/V350/V350J ya ƙunshi duka RS232/485 da tashoshin USB; lura cewa kawai daya za a iya amfani da tashar a lokaci guda.

Daidaitaccen Abubuwan Abubuwan Kit

Abu	Saukewa: V130-RA22	V130-TRA22 V130J-TRA22	Saukewa: V350-RA22	V350-TRA22 V350J-TRA22	V430J-RA22 V430J-TRA22
Mai sarrafawa	Ee
Tubalan Tasha	Ee
Baturi (shigar)	Ee
Slides (Labarun maɓalli 2 sets)	Babu		Ee		Babu
Maƙallan hawa	Ee (kashi 2)				Ee (kashi 4)
Rubber Seal	Ee

 

Alamar Faɗakarwa da Ƙuntatawa Gabaɗaya

Alamar Faɗakarwa da Ƙuntatawa Gabaɗaya
Lokacin da ɗayan waɗannan alamomin suka bayyana, karanta bayanan haɗin gwiwa a hankali.
Alama	Ma'ana	Bayani
	hadari	Hadarin da aka gano yana haifar da lalacewar jiki da ta dukiya.
	Gargadi	Hatsarin da aka gano na iya haifar da asarar ta jiki da ta dukiya.
Tsanaki	Tsanaki	Yi amfani da hankali.
§ Kafin amfani da wannan samfurin, mai amfani dole ne ya karanta kuma ya fahimci wannan takarda. § Duk examples da zane-zane an yi nufin su taimaka fahimta, kuma ba su da garantin aiki. Unitronics ba ta karɓar alhakin ainihin amfani da wannan samfurin bisa waɗannan tsoffinamples. Da fatan za a zubar da wannan samfurin bisa ga ƙa'idodi da ƙa'idodi na gida da na ƙasa.   ƙwararrun ma'aikatan sabis ne kawai ya kamata su buɗe wannan na'urar ko su yi gyara.
	§ Rashin bin ƙa'idodin aminci masu dacewa na iya haifar da mummunan rauni ko lalacewar dukiya.
	§ Kada kayi ƙoƙarin amfani da wannan na'urar tare da sigogi waɗanda suka wuce matakan izini. § Don guje wa lalata tsarin, kar a haɗa/ cire haɗin na'urar lokacin da wuta ke kunne.

La'akarin Muhalli

	§ Kada a sanyawa a cikin wuraren da: ƙura mai wuce gona da iri, gurɓataccen iskar gas ko mai ƙonewa, danshi ko ruwan sama, zafi mai yawa, girgiza ta yau da kullun ko girgiza mai wuce kima, daidai da ƙa'idodin da aka bayar a cikin takaddar ƙayyadaddun kayan aikin. § Kada a sanya a cikin ruwa ko barin ruwa ya zubo kan naúrar. § Kar ka bari tarkace su fada cikin naúrar yayin shigarwa.
	§ Samun iska: 10mm sarari da ake buƙata tsakanin saman mai sarrafawa / gefuna na ƙasa & bangon shinge. § Shigarwa a iyakar nisa daga babban voltage igiyoyi da kayan wuta.

Yin hawa

Lura cewa ƙididdiga don dalilai ne kawai.Lura cewa don samfuran V130/V350, girman bezel ya kai mm 8.4 (0.33").

Samfura	Yanke	View yanki
Saukewa: V130V130J	92×92 mm (3.622"x3.622")	58×30.5mm (2.28"x1.2")
V350/V350J	92×92 mm (3.622"x3.622")	72×54.5mm (2.95"x2.14")
V430J	122.5×91.5 mm (4.82"x3.6")	96.4×55.2mm (3.79"x2.17")

Ruwa na Panel
Kafin ka fara, lura cewa hawan panel ba zai iya zama fiye da 5 mm lokacin farin ciki ba.

1. Yi gunkin panel daga girman da ya dace:
2. Zamar da mai sarrafawa a cikin yanke, tabbatar da cewa hatimin roba yana wurin.
3. Tura maƙallan masu hawa cikin ramummuka a gefen panel kamar yadda aka nuna a hoton da ke ƙasa.
4. Matse sandunan ɓangarorin a kan panel. Riƙe madaidaicin amintacce akan naúrar yayin da kuke ƙara matsawa.
5. Lokacin da aka ɗora shi da kyau, mai sarrafawa yana nan daidai a cikin yanke-yanke kamar yadda aka nuna a alkalumman da ke rakiyar.

DIN-dogon hawa (V130/V350/V130J/V350J)

1. Matsa mai sarrafawa akan layin dogo na DIN kamar yadda aka nuna a adadi na dama.
2. Lokacin da aka ɗora shi da kyau, mai sarrafa yana nan daidai a kan titin dogo na DIN kamar yadda aka nuna a adadi na dama.

Farashin UL

Sashe mai zuwa ya dace da samfuran Unitronics waɗanda aka jera tare da UL.
Samfura masu zuwa: V130-33-R34, V130-J-R34, V130-T4-ZK1, V350-35-RA22, V350-J-RA22, V350-35-R34, V350-J-R34, V430-J- R34
an jera UL don Wurare masu haɗari.
The following models: V130-33-B1,V130-J-B1,V130-33-TA24,V130-J-TA24,V130-33-T38,V130-J-T38 V130-33-TR20,V130-J-TR20,V130-33-TR34,V130-J-TR34,V130-33-RA22,V130-J-RA22, V130-33-TRA22,V130-J-TRA22,V130-33-T2,V130-J-T2,V130-33-TR6,V130-J-TR6,V130-33-R34, V350-35-B1, V130-T4-ZK1, V350-J-B1,V350-35-TA24,V350-J-TA24,V350-35-T38,V350-J-T38, V350-35-TR20,V350-J-TR20,V350-35-TR34,V350-J-TR34,V350-35-TRA22,V350-J-TRA22, V350-35-T2,V350-J-T2,V350-35-TR6,V350-J-TR6,V350-S-TA24,V350-JS-TA24,V350-35-RA22, V350-J-RA22,V350-35-R34, V430-J-B1,V430-J-TA24,V430-J-T38, V430-J-R34,V430-J-RH2, V430-J-TR34,V430-J-RA22,V430-J-TRA22,V430-J-T2,V430-J-RH6
an jera UL don Wuri na Musamman.
Don samfura daga jerin V130, V130-J, V430, waɗanda suka haɗa da “T4” ko “J4” a cikin Sunan Model, Ya dace da hawa kan shimfidar shimfidar wuri na Yadi na 4X.
Don misaliamples: V130-T4-R34, V130-J4-R34, V430-J4-T2

UL Talakawa Wuri
Domin saduwa da daidaitaccen wurin UL na yau da kullun, panel-hana wannan na'urar akan shimfidar shimfidar nau'in 1 ko 4 X.

UL Ratings, Masu Gudanar da Shirye-shiryen don Amfani a Wuraren Haɗari, Class I, Division 2, Rukunin A, B, C da D
Waɗannan Bayanan Bayanin Sakin suna da alaƙa da duk samfuran Unitronics waɗanda ke ɗauke da alamun UL da aka yi amfani da su don yiwa samfuran da aka yarda don amfani a wurare masu haɗari, Class I, Division 2, Rukunin A, B, C da D.

Tsanaki 

• Wannan kayan aikin ya dace don amfani a cikin Class I, Division 2, Rukunin A, B, C da D, ko wuraren da ba masu haɗari kawai.
• Wayoyin shigarwa da fitarwa dole ne su kasance daidai da Class I, hanyoyin wayoyi na Division 2 kuma daidai da ikon da ke da iko.
• GARGAƊI—Haɗarin Fashe—Masanin abubuwan da ke tattare da shi na iya ɓata dacewa ga Class I, Division 2.
• GARGAƊI – HAZARAR FASHE – Kar a haɗa ko cire haɗin kayan aiki sai dai idan an kashe wuta ko kuma an san wurin ba shi da haɗari.
• GARGAƊI – Fitarwa ga wasu sinadarai na iya lalata kaddarorin rufe kayan da ake amfani da su a Relays.
• Dole ne a shigar da wannan kayan aikin ta hanyar amfani da hanyoyin wayoyi kamar yadda ake buƙata don Class I, Division 2 kamar yadda NEC da/ko CEC ke buƙata.

Panel-Mounting
Don masu sarrafa shirye-shirye waɗanda za a iya saka su kuma a kan panel, don saduwa da ma'aunin UL Haz Loc, panel-hana wannan na'urar akan shimfidar shimfidar Nau'in 1 ko Nau'in 4X.

Ƙimar Juriya na Relay
Samfuran da aka jera a ƙasa sun ƙunshi abubuwan da aka fitar:
Masu sarrafa shirye-shirye, Samfura: V430-J-R34, V130-33-R34, V130-J-R34 da V350-35-R34, V350-J-R34

• Lokacin da aka yi amfani da waɗannan takamaiman samfuran a wurare masu haɗari, ana ƙididdige su a 3A res.
• Sai dai nau'ikan V430-J-R34, V130-33-R34, V130-J-R34, V130-T4-ZK1 da V350-35-R34, V350-J-R34, lokacin da ake amfani da waɗannan takamaiman samfuran a cikin mahalli marasa haɗari. yanayi, ana ƙididdige su a 5A res, kamar yadda aka bayar a ƙayyadaddun samfurin.

Sadarwa da Ma'ajiyar Ƙwaƙwalwar Cirewa

Lokacin da samfuran suka ƙunshi ko dai tashar sadarwar USB, Ramin katin SD, ko duka biyun, babu
Ramin katin SD ko tashar USB ana nufin haɗa su ta dindindin, yayin da tashar USB an yi niyya don shirye-shirye kawai.

Cire / Maye gurbin baturi

Lokacin da aka shigar da samfur tare da baturi, kar a cire ko musanya baturin sai dai idan an kashe wuta, ko kuma an san wurin ba shi da haɗari. Lura cewa ana ba da shawarar adana duk bayanan da ke cikin RAM, don guje wa asarar bayanai lokacin canza baturi yayin da aka kashe wuta. Hakanan ana buƙatar sake saita bayanan kwanan wata da lokaci bayan aikin.

Waya

• Kar a taɓa wayoyi masu rai.
• Shigar da na'urar kashewa ta waje. Kare gajeriyar kewayawa a cikin wayoyi na waje.
• Yi amfani da na'urorin kariya da suka dace.
• Kada a haɗa fil ɗin da ba a yi amfani da shi ba. Yin watsi da wannan umarnin na iya lalata na'urar.
• Bincika duk wayoyi sau biyu kafin kunna wutar lantarki.

Tsanaki

• Don guje wa lalata waya, kar a wuce iyakar ƙarfin 0.5 N·m (5 kgf·cm).
• Kada a yi amfani da gwano, solder, ko wani abu akan fitaccen waya wanda zai iya sa igiyar waya ta karye.
• Sanya a matsakaicin nisa daga babban-voltage igiyoyi da kayan wuta.

Shigar Saitunan Jumper

Teburan da ke ƙasa suna nuna yadda ake saita takamaiman jumper don canza aikin shigarwa. Don samun dama ga masu tsalle-tsalle na I/O, dole ne ku buɗe mai sarrafawa bisa ga umarnin farawa a shafi na 13.

• Saitunan jumper marasa jituwa da haɗin waya na iya lalata mai sarrafawa sosai.

Abubuwan Shiga na Dijital 0-11: Saita Nau'in
Saita zuwa	JP12 (duk abubuwan da aka shigar)
npn (jinki)	A
pnp (source)*	B
Abubuwan shigarwa 7/8: Saita Nau'in - Digital ko RTD/TC #1
Saita zuwa	JP1	JP2	JP3
Dijital*	A	A	A
Thermocouple	B	B	B
PT100	B	A	B
Abubuwan shigarwa 9/10: Saita Nau'in - Digital ko RTD/TC #0
Saita zuwa	JP5	JP6	JP7
Dijital*	A	A	A
Thermocouple	B	B	B
PT100	B	A	B
Shigarwa 11: Saita Nau'in - Digital ko CM don PT100
Saita zuwa	JP11
Dijital*	A
Saukewa: PT100	B
Shigarwa 5: Saita Nau'in - Dijital ko Analog #3
Saita zuwa	JP4	JP10
Dijital*	A	A
Voltage	B	A
A halin yanzu	B	B
Shigarwa 6: Saita Nau'in - Dijital ko Analog #2
Saita zuwa	JP8	JP9
Dijital*	A	A
Voltage	B	A
A halin yanzu	B	B

Fitowar Analog 0: Saita zuwa Voltage/Yanzu
Saita zuwa	JP13
Voltage*	A
A halin yanzu	B

Fitowar Analog 1: Saita zuwa Voltage/Yanzu
Saita zuwa	JP14
Voltage*	A
A halin yanzu	B

• Ya kamata a haɗa garkuwa a tushen siginar.
• Dole ne a haɗa siginar 0V na shigarwar analog zuwa 0V na mai sarrafawa.
• Thermocouple 0: Yi amfani da Input 9 azaman shigarwa mara kyau da 10 a matsayin tabbatacce.
• Thermocouple 1: Yi amfani da Input 7 azaman shigarwa mara kyau da 8 a matsayin tabbatacce.

Nau'in	Temp. Rage	Launin Waya
		ANSI (Amurka)	BS1843 (Birtaniya)
mV	-5 zuwa 56mV
B	200 zuwa 1820˚C (300 zuwa 3276˚F)	+ Grey - Ja	+Babu - Shuɗi
E	-200 zuwa 750˚C (-328 zuwa 1382˚F)	+ Violet - Ja	+ Brown - Shuɗi
J	-200 zuwa 760˚C (-328 zuwa 1400˚F)	+ Farar fata - Ja	+ rawaya - Shuɗi
K	-200 zuwa 1250˚C (-328 zuwa 2282˚F)	+ rawaya - Ja	+ Brown - Shuɗi
N	-200 zuwa 1300˚C (-328 zuwa 2372˚F)	+ Orange - Ja	+ Orange - Shuɗi
R	0 zuwa 1768˚C (32 zuwa 3214˚F)	+ Baƙar fata - Ja	+ Farar fata - Shuɗi
S	0 zuwa 1768˚C (32 zuwa 3214˚F)	+ Baƙar fata - Ja	+ Farar fata - Shuɗi
T	-200 zuwa 400˚C (-328 zuwa 752˚F)	+ Shuɗi - Ja	+ Farar fata - Shuɗi

RTD

• PT100 (Sensor 0): yi amfani da Input 9 da 10, masu alaƙa da siginar CM.
• PT100 (Sensor 1): yi amfani da Input 7 da 8, masu alaƙa da siginar CM.
• 4 waya PT100 za a iya amfani da shi ta barin daya daga cikin firikwensin ya jagoranci unconnected.

Kayan aiki 

Ƙara Tsawon Rayuwar Sadarwa
Don ƙara tsawon rayuwar lambobin fitarwa na relay da kuma kare na'urar daga yuwuwar lalacewa ta hanyar EMF, haɗa:

• A clamping diode a layi daya tare da kowane inductive DC lodi
• Da'irar snubber na RC a layi daya tare da kowane nauyin AC inductive

Tushen wutan lantarki 

Mai sarrafawa yana buƙatar samar da wutar lantarki na 24VDC na waje.

• Dole ne samar da wutar lantarki ya haɗa da rufin biyu. Dole ne a ƙididdige abubuwan da aka fitar azaman SELV/PELV/Class2/Ikantaccen Ƙarfi.
• Yi amfani da wayoyi daban-daban don haɗa layin ƙasa mai aiki (fin 3) da layin 0V (fitin 2) zuwa tsarin ƙasan tsarin.
• Shigar da na'urar kashewa ta waje. Kare gajeriyar kewayawa a cikin wayoyi na waje.
• Bincika duk wayoyi sau biyu kafin kunna wutar lantarki.
• Kar a haɗa siginar 'Neutral' ko 'Layi' na 110/220VAC zuwa fil ɗin 0V na na'ura
• A cikin lamarin voltage sauye-sauye ko rashin daidaituwa ga voltage Ƙayyadaddun wutar lantarki, haɗa na'urar zuwa tsarin samar da wutar lantarki.

Ƙaddamar da PLC+HMI
Don haɓaka aikin tsarin, guje wa tsangwama ta hanyar:

• Hawan mai sarrafawa akan karfen karfe.
• Haɗa kowane haɗin gama gari da ƙasa kai tsaye zuwa ƙasan tsarin ku.
• Don yin wayoyi na ƙasa yana amfani da waya mafi guntu kuma mafi kauri.

Sadarwa

• V130/V130J/V350J
  Waɗannan samfuran sun ƙunshi ginanniyar tashar tashar jiragen ruwa ta RS232/RS485 (Port 1)
• V430J/V350/V350J
  Waɗannan samfuran sun ƙunshi ginanniyar tashoshin jiragen ruwa: 1 USB da 1 RS232/RS485 (Port 1).

Lura cewa haɗa PC ta jiki zuwa mai sarrafawa ta USB yana dakatar da sadarwar RS232/RS485 ta Port 1. Lokacin da aka cire PC, RS232/RS485 ta dawo.

RS232/RS485 tashar jiragen ruwa

	§ Kashe wuta kafin yin haɗin sadarwa.
Tsanaki	§ Yi amfani da adaftan tashar tashar jiragen ruwa koyaushe.
Tsanaki	§ Sigina suna da alaƙa da 0V mai sarrafawa; 0V guda daya ake amfani da wutar lantarki. § Tashar tashar jiragen ruwa ba ta keɓe ba. Idan ana amfani da mai sarrafawa tare da na'urar waje mara keɓe, guje wa yuwuwar voltage wanda ya wuce ± 10V.

• Yi amfani da RS232 don zazzage shirye-shirye daga PC, da kuma sadarwa tare da serial na'urori da aikace-aikace, kamar SCADA.
• Yi amfani da RS485 don ƙirƙirar cibiyar sadarwa mai ɗimbin yawa mai ɗauke da na'urori 32.

Pinouts
Abubuwan da ke ƙasa suna nuna alamun tashar tashar PLC.* Madaidaitan igiyoyin shirye-shirye ba sa samar da wuraren haɗin kai don fil 1 da 6.
** Lokacin da aka daidaita tashar jiragen ruwa zuwa RS485, ana amfani da Pin 1 (DTR) don siginar A, kuma ana amfani da siginar Pin 6 (DSR) don siginar B.
Lura cewa yana yiwuwa a kafa haɗin PC zuwa PLC ta amfani da RS232 koda lokacin da aka saita PLC zuwa RS485 (wannan yana kawar da buƙatar buɗe mai sarrafawa don saita masu tsalle).
Don yin haka, cire haɗin haɗin RS485 (filin 1 & 6) daga PLC kuma haɗa daidaitaccen kebul na shirye-shiryen RS232.
Lura cewa wannan yana yiwuwa ne kawai idan ba a yi amfani da siginar DTR da DSR na RS232 ba (wanda shine ma'auni).

Saita Ma'aunin Sadarwar RS232/RS485, V130/V350/V130J/V350JAna iya saita wannan tashar jiragen ruwa zuwa ko dai RS232 ko RS485 ta hanyar jumper.
Hoton da ke rakiyar yana nuna tsoffin saitunan masana'anta na jumper.
Ana iya amfani da waɗannan jumpers don:

• Saita sadarwa zuwa RS485, ta hanyar saita duka masu tsalle-tsalle na COMM zuwa '485'.
• Saita ƙarewar RS485, ta saita duka masu tsalle-tsalle na TERM zuwa 'KASHE'.

Don samun damar masu tsalle, dole ne ku buɗe mai sarrafawa bisa ga umarnin a shafi na 13.

Saita Ma'aunin Sadarwar RS232/RS485, V430J
Ana iya saita wannan tashar jiragen ruwa zuwa ko dai RS232 ko RS485 ta hanyar sauya DIP:
Teburin yana nuna saitunan tsohuwar masana'anta na DIP. Yi amfani da tebur don daidaita saitunan.

	Canja Saituna
	1	2	3	4	5	6
RS232*	ON	KASHE	KASHE	ON	KASHE	KASHE
Saukewa: RS485	KASHE	ON	ON	KASHE	KASHE	KASHE
RS485 tare da ƙarewa ***	KASHE	ON	ON	KASHE	ON	ON

USB Port

Tsanaki	§ tashar USB ba ta keɓe ba. Tabbatar cewa PC da mai sarrafawa suna ƙasa zuwa yuwuwar iri ɗaya.
Ana iya amfani da tashar USB don shirye-shirye, zazzagewar OS, da samun damar PC.

Bude Mai Gudanarwa

• Kafin yin waɗannan ayyukan, taɓa wani abu mai tushe don fitar da duk wani cajin lantarki.
• Ka guji taɓa allon PCB kai tsaye. Rike allon PCB ta mahaɗin sa.

1. Kashe wutar lantarki, cire haɗin, kuma cire mai sarrafawa.
2. Murfin baya na mai sarrafawa ya ƙunshi sukurori 4, waɗanda ke cikin sasanninta. Cire sukurori, kuma cire murfin baya.

Canza Saitunan I/O
Bayan buɗe mai sarrafawa da fallasa allon I / O, zaku iya canza saitunan jumper bisa ga teburin da aka nuna a sama.

Canza Saitunan Sadarwa (V130/V350/V130J/V350J Kawai)

1. Don samun damar masu tsallen sadarwa, riƙe allon I/O PCB ta masu haɗin sama da ƙasa kuma a hankali cire allon.
2. Nemo masu tsalle, sannan canza saitunan kamar yadda ake buƙata, bisa ga saitunan masu tsalle da aka nuna a shafi na 12.

Rufe Controller 

1. Sauya allon a hankali. Tabbatar cewa fil ɗin sun dace daidai cikin ma'ajin da suka dace. Kada ku tilastawa allon zuwa wurin; yin haka na iya lalata mai kula.
2. Sauya murfin baya na mai sarrafawa kuma ɗaure sukurori na kusurwa.

Lura cewa dole ne ka maye gurbin murfin baya amintacce kafin kunna mai sarrafawa.

Vision™ PLC+HMI

V130-33-TRA22/V130-J-TRA22
V350-35-TRA22/V350-J-TRA22
V430-J-TRA22

Ƙididdiga na Fasaha

Bayanin oda

Bayanin oda
Abu
Saukewa: V130-33-TRA22	PLC tare da Classic panel, Monochrome nuni 2.4 ″
V130-J-TRA22	PLC tare da Flat panel, Monochrome nuni 2.4 ″
Saukewa: V350-35-TRA22	PLC tare da Classic panel, Launi touch nuni 3.5 ''
V350-J-TRA22	PLC tare da Flat panel, Launi touch nuni 3.5''
V430-J-TRA22	PLC tare da Flat panel, Launi touch nuni 4.3''
Kuna iya samun ƙarin bayani, kamar zane-zane na wayoyi, a cikin jagorar shigarwa na samfurin da ke cikin Laburaren Fasaha a www.unitronics.com.

Abubuwan Shiga na Dijital
Yawan bayanai	12. Duba bayanin kula 2
Nau'in shigarwa	Duba bayanin kula 2
Galvanic kadaici	Babu
Matsayin shigar ƙuri'atage	Saukewa: 24VDC
Shigar da Voltage	Shigarwar dijital ta al'ada	Shigar da Babban Gudu. Duba bayanin kula 3
pnp (source)	0-5VDC don Logic '0' 17-28.8VDC don Logic '1'	0-3VDC don Logic '0' 20.4-28.8VDC don Logic '1'
npn (jinki)	17-28.8VDC don Logic '0' 0-5VDC don Logic'1	20.4-28.8VDC don Logic '0' 0-3VDC don Logic'1
Shigar da Yanzu	I0, I1: 5.4mA@24VDC I2-I11: 3.7mA@24VDC
Input impedance	I0, I1: 4.5KΩ I2-I11: 6.5KΩ
Lokacin Amsa	10ms na yau da kullun, lokacin amfani da shi azaman shigarwar dijital ta al'ada
Tsawon Kebul na shigarwa
Input ɗin dijital ta al'ada	Har zuwa mita 100

Shigar da Babban Gudu
Har zuwa mita 50, garkuwa, duba Teburin Mitar da ke ƙasa

Abubuwan shigar da sauri mai girma	Ƙididdiga da ke ƙasa suna aiki lokacin da aka haɗa su azaman HSC/shaft-encoder. Duba bayanin kula 2
Yawanci, HSC
Nau'in direba	pnp/npn	Tura-ja
Tsawon kebul (max.)
10m	95kHz mafi girma	200kHz mafi girma
25m	50kHz mafi girma	200kHz mafi girma
50m	25kHz mafi girma	200kHz mafi girma
Mitar, Shaft-encoder
Nau'in direba	pnp/npn	Tura-ja
Tsawon kebul (max.)
10m	35kHz mafi girma	100kHz mafi girma
25m	18kHz mafi girma	100kHz mafi girma
50m	10kHz mafi girma	100kHz mafi girma
Zagayen aiki	40-60%
Ƙaddamarwa	32-bit
Bayanan kula:
2. Motocin V130/V350/V130J/V350J/V430J-TRA22 sun ƙunshi jimillar abubuwan shigarwa 12. Ana iya amfani da duk abubuwan shigarwa guda 12 azaman abubuwan shigar dijital. Ana iya haɗa su cikin rukuni ta hanyar tsalle ɗaya kamar npn ko pnp. Bugu da kari, bisa ga saitunan jumper da wayoyi masu dacewa: - Abubuwan shigarwa na 5 da 6 na iya aiki azaman abubuwan dijital ko na analog. – Input 0 na iya aiki azaman mai ƙididdigewa mai sauri, azaman ɓangaren rumbun ɓoye, ko azaman abubuwan shigar da dijital na yau da kullun. - Input 1 na iya aiki azaman sake saitin ƙidayar, shigarwar dijital ta al'ada, ko azaman ɓangaren maɓalli na shaft. - Idan an saita shigarwar 0 azaman babban mai saurin sauri (ba tare da sake saiti ba), shigarwar 1 na iya aiki azaman shigarwar dijital ta al'ada. - Abubuwan shigarwa 7-8 da 9-10 na iya aiki azaman dijital, thermocouple, ko abubuwan PT100; shigarwa 11 kuma zai iya zama siginar CM don PT100. 3. Idan ka saita shigarwa a matsayin babban sauri, zaka iya amfani da na'urar ƙarewa wanda ya ƙunshi nau'in tura-pull. A wannan yanayin, shigarwar mai sauri voltage ratings don npn/pnp nema.

Bayanin oda
Abu
Saukewa: V130-33-TRA22	PLC tare da Classic panel, Monochrome nuni 2.4 ″
V130-J-TRA22	PLC tare da Flat panel, Monochrome nuni 2.4 ″
Saukewa: V350-35-TRA22	PLC tare da Classic panel, Launi touch nuni 3.5 ''
V350-J-TRA22	PLC tare da Flat panel, Launi touch nuni 3.5''
V430-J-TRA22	PLC tare da Flat panel, Launi touch nuni 4.3''
Kuna iya samun ƙarin bayani, kamar zane-zane na wayoyi, a cikin jagorar shigarwa na samfurin da ke cikin Laburaren Fasaha a www.unitronics.com.

Lokutan juyawa suna tarawa kuma sun dogara da jimillar adadin abubuwan da aka saita na analog. Domin misaliampko, idan an saita shigarwar analog ɗaya kawai (yanayin sauri), lokacin juyawa zai zama 30ms; duk da haka, idan ana daidaita nau'ikan analog guda biyu (yanayin al'ada) da abubuwan shigar da RTD guda biyu, lokacin juyawa zai zama 100ms + 100ms + 300ms + 300ms = 800ms.
Ƙimar analog na iya nuna kurakurai kamar yadda aka nuna a ƙasa:

Darajar: 12-bit	Darajar: 14-bit	Dalili mai yiwuwa
-1	-1	Ya ɗan karkata ƙasa da kewayon shigarwa
4096	16384	Ya ɗan karkata sama da kewayon shigarwa
32767	32767	Yana karkata sosai sama ko ƙasa da kewayon shigarwar

Abubuwan shigar da RTD
Nau'in RTD		PT100
Yawan zafin jiki a		0.00385/0.00392
Kewayon shigarwa		-200 zuwa 600°C/-328 zuwa 1100°F. 1 zuwa 320Ω.
Kaɗaici		Babu
Hanyar juyawa		Voltage zuwa mita
Ƙaddamarwa		0.1°C/0.1°F
Lokacin juyawa		300ms mafi ƙarancin kowane tashoshi. Duba bayanin kula 4 a sama
Input impedance		>10MΩ
Bayanan Bayani na PT100		150μA na hali
Kuskuren cikakken sikelin		± 0.4%
Kuskuren layi		± 0.04%
Alamar matsayi		Ee. Duba bayanin kula 6
Tsawon igiya		Har zuwa mita 50, garkuwa
Bayanan kula:
6. Ƙimar analog na iya nuna kurakurai kamar yadda aka nuna a ƙasa:
Daraja	Dalili mai yiwuwa
32767	Ba a haɗa na'urar firikwensin zuwa shigarwa, ko ƙima ta wuce kewayon da aka halatta
-32767	Sensor gajere ne

Abubuwan Shigar Thermocouple
Kewayon shigarwa	Duba bayanin kula 7
Kaɗaici	Babu
Hanyar juyawa	Voltage zuwa mita
Ƙaddamarwa	Matsakaicin 0.1°C/0.1°F
Lokacin juyawa	100ms mafi ƙarancin kowane tashoshi. Duba bayanin kula 4 a sama
Input impedance	>10MΩ
Cold junction diyya	Na gida, atomatik
Kuskuren ramuwa junction	Matsakaicin ± 1.5°C/±2.7°F
Cikakkar matsakaicin kimantawa	± 0.6VDC
Kuskuren cikakken sikelin	± 0.4%
Kuskuren layi	± 0.04%
Lokacin dumama	½ hour yawanci, ±1°C/±1.8°F maimaitawa
Alamar matsayi	Ee. Duba bayanin kula 6 a sama

Bayanan kula:
Ƙimar analog na iya nuna kurakurai kamar yadda aka nuna a ƙasa:

• Daraja
  Dalili mai yiwuwa
• 32767
  Ba a haɗa na'urar firikwensin zuwa shigarwa, ko ƙima ta wuce kewayon da aka halatta
• -32767
  Sensor gajere ne

Abubuwan Shigar Thermocouple
Kewayon shigarwa	Duba bayanin kula 7
Kaɗaici	Babu
Hanyar juyawa	Voltage zuwa mita
Ƙaddamarwa	Matsakaicin 0.1°C/0.1°F
Lokacin juyawa	100ms mafi ƙarancin kowane tashoshi. Duba bayanin kula 4 a sama
Input impedance	>10MΩ
Cold junction diyya	Na gida, atomatik
Kuskuren ramuwa junction	Matsakaicin ± 1.5°C/±2.7°F
Cikakkar matsakaicin kimantawa	± 0.6VDC
Kuskuren cikakken sikelin	± 0.4%
Kuskuren layi	± 0.04%
Lokacin dumama	½ hour yawanci, ±1°C/±1.8°F maimaitawa
Alamar matsayi	Ee. Duba bayanin kula 6 a sama

Bayanan kula:
Na'urar kuma tana iya auna juzu'itage tsakanin kewayon -5 zuwa 56mV, a wani ƙuduri na 0.01mV. Na'urar kuma za ta iya auna mitar ƙimar danye a ƙudurin 14-bits (16384). Ana nuna kewayon shigarwa a cikin tebur mai zuwa:

Abubuwan Dijital
Yawan abubuwan da aka fitar	4 relay. Duba bayanin kula 8
Nau'in fitarwa	SPST-NO (Form A)
Kaɗaici	Ta hanyar gudu
Nau'in relay	Tyco PCN-124D3MHZ ko mai jituwa
Fitar halin yanzu (nauyin juriya)	3A matsakaicin kowane fitarwa 8 Matsakaicin jimlar kowace na kowa
An ƙaddara voltage	250VAC / 30VDC
Mafi ƙarancin kaya	1mA, 5VDC
Tsawon rayuwa	Ayyukan 100k a matsakaicin nauyi
Lokacin amsawa	10ms (na al'ada)
Kariyar lamba	Ana buƙatar matakan kariya na waje (duba Ƙara Tsawon Rayuwar Sadarwa a cikin Jagorar Shigarwa na samfur)
Bayanan kula:
8. Fitowa 4, 5, 6, da 7 suna raba sigina gama gari.

Abubuwan da transistor
Yawan abubuwan da aka fitar	4 npn (zuciya). Duba bayanin kula 9
Nau'in fitarwa	N-MOSFET, (bude magudanar ruwa)
Warewa Galvanic	Babu
Matsakaicin fitarwa na yanzu (nauyin juriya)	100mA a kowace fitarwa
An ƙaddara voltage	Saukewa: 24VDC
Matsakaicin jinkiri zuwa ON	1ms
Matsakaicin jinkiri ON zuwa KASHE	10ms
HSO freq. kewayon da resistive lodi	5Hz-200kHz (a matsakaicin juriya na 1.5kΩ)
Matsakaicin ON voltagda drop	Saukewa: 1VDC
Kariyar gajeriyar hanya	Babu
Voltage kewayon	3.5V zuwa 28.8VDC
Bayanan kula:
9. Abubuwan da aka fitar 0, 1, 2 da 3 suna raba siginar 0V gama gari. Dole ne a haɗa siginar 0V na fitarwa zuwa 0V na mai sarrafawa.

Abubuwan Analog
Yawan abubuwan da aka fitar	2
Kewayon fitarwa	0-10V, 4-20mA. Duba bayanin kula 10
Ƙaddamarwa	12-bit (raka'a 4096)
Lokacin juyawa	Dukkanin abubuwan da aka sabunta ana sabunta su a kowane sikanin
Load impedance	1kΩ mafi ƙarancin—voltage Matsakaicin 500Ω — na yanzu
Galvanic kadaici	Babu
Kuskuren layi	± 0.1%
Iyakar kuskuren aiki	± 0.2%
Bayanan kula:
10. Lura cewa kewayon kowane I/O an bayyana shi ta hanyar wayoyi, saitunan jumper, da kuma cikin software na mai sarrafawa.

Allon Nuni Zane
Abu	V130-TRA22 V130J-TRA22	V350-TRA22 V350J-TRA22	V430J-TRA22
Nau'in LCD	STN, LCD nuni	TFT, LCD nuni	TFT, LCD nuni
Hasken baya	Farin LED	Farin LED	Farin LED
Nuni ƙuduri	128×64 pixels	320×240 pixels	480×272 pixels
Viewyanki	2.4"	3.5"	4.3"
Launuka	Monochrome	65,536 (16-bit)	65,536 (16-bit)
Bambancin allo	Ta hanyar software (Kimanin kantin sayar da kayayyaki zuwa SI 7, ƙimar ƙimar: 0 zuwa 100%)	Kafaffen	Kafaffen
Kariyar tabawa	Babu	Resistive, analog	Resistive, analog
'Taba' nuni	Babu	Ta hanyar buzzer	Ta hanyar buzzer
Ikon hasken allo	Ta hanyar software (Kimanin kantin sayar da kayayyaki zuwa SI 9, 0 = A kashe, 1 = Kunnawa)	Ta hanyar software (Kimanin kantin sayar da kayayyaki zuwa SI 9, ƙimar ƙimar: 0 zuwa 100%)
Faifan Madannai	Babu	Yana nuna madanni na kama-da-wane lokacin da aikace-aikacen ke buƙatar shigarwar bayanai.

faifan maɓalli
Abu	V130-TRA22 V130J-TRA22	V350-TRA22 V350J-TRA22	V430J-TRA22
Yawan maɓallai	Maɓallai 20, gami da maɓallai masu alamar mai amfani guda 10	5 maɓallan ayyuka masu shirye-shirye
Nau'in maɓalli	Ƙarfe dome, rufe murfin membrane
Slides	Za a iya shigar da nunin faifai a cikin faranti mai aiki don yin lakabin maɓalli na musamman. Koma zuwa V130 Slides.pdf. Cikakken saitin nunin faifai yana samuwa ta tsari daban	Za a iya shigar da nunin faifai a cikin faranti mai aiki don yin lakabin maɓalli na musamman. Koma zuwa V350 Slides.pdf. Ana ba da saiti biyu na nunin faifai tare da mai sarrafawa: saitin maɓallan kibiya ɗaya, da ɗaya babu saitin.	Babu

Shirin
Abu	V130-TRA22 V130J-TRA22	V350-TRA22 V350J-TRA22	V430J-TRA22
Girman ƙwaƙwalwar ajiya
Dabarun Aikace-aikace	512 KB	1MB	1MB
Hotuna	128 KB	6MB	12MB
Fonts	128 KB	512 KB	512 KB

Abu	V130-TRA22 V130J-TRA22	V350-TRA22 V350J-TRA22 V430J-TRA22
Ƙwaƙwalwar ajiya	4096	8192	MB	Bit (naɗa)
Ƙwaƙwalwar ƙwaƙwalwa	2048	4096	MI	16-bit sanya hannu / ba a sanya hannu ba
Dogayen Integers	256	512	ML	32-bit sanya hannu / ba a sanya hannu ba
Kalma Biyu	64	256	DW	32-bit ba a sanya hannu ba
Ƙwaƙwalwar Ƙwaƙwalwa	24	64	MF	32-bit sanya hannu / ba a sanya hannu ba
Fast Bits	1024	1024	XB	Fast Bits (naɗa) - ba a riƙe ba
Mai sauri Integers	512	512	XI	16 bit sanya hannu/ba a sanya hannu ba (sauri, ba a riƙe)
Fast Dogon Integers	256	256	XL	32 bit sanya hannu/ba a sanya hannu ba (sauri, ba a riƙe)
Saurin Kalma Biyu	64	64	XDW	32 bit ba a sanya hannu ba (sauri, ba a riƙe)
Masu ƙidayar lokaci	192	384	T	Res. 10 ms; max 99h, 59 min, 59.99s
Ma'auni	24	32	C	32-bit

Memory mai cirewa
Micro SD katin	Mai jituwa tare da daidaitaccen SD da SDHC; har zuwa 32GB ma'ajiyar bayanai, Ƙararrawa, Trends, Data Tables, madadin Tsani, HMI, da OS. Duba bayanin kula 11
Bayanan kula:
11.User dole ne format via Unitronics SD kayan aikin utility.

Tashoshin Sadarwa
Tashar ruwa 1	1 tashar, RS232/RS485 da na'urar USB (V430/V350/V350J kawai). Duba bayanin kula 12
Galvanic kadaici	A'a
Baud darajar	300 zuwa 115200 bps
Saukewa: RS232
Shigar da kunditage	± 20VDC cikakken iyakar
Tsawon igiya	Matsakaicin 15m (50')
Saukewa: RS485
Shigar da kunditage	-7 zuwa +12VDC matsakaicin bambanci
Nau'in kebul	Garkuwar murɗaɗɗen biyu, daidai da EIA 485
Tsawon igiya	Matsakaicin 1200m (4000')
Nodes	Har zuwa 32
Na'urar USB (V430/V350/V350J kawai)
Nau'in tashar jiragen ruwa	Mini-B, Duba bayanin kula 14
Ƙayyadaddun bayanai	USB 2.0 ƙararrawa; cikakken gudun
Kebul	USB 2.0 ƙararrawa; zuwa 3m
Port 2 (na zaɓi)	Duba bayanin kula 13
CANbus (na zaɓi)	Duba bayanin kula 13

Bayanan kula:

12. Ana ba da wannan samfurin tare da tashar tashar jiragen ruwa: RS232/RS485 (Port 1). An saita ma'auni zuwa ko dai RS232 ko RS485 bisa ga saitunan jumper. Koma zuwa Jagorar Shigarwa na samfur. 13. Mai amfani na iya yin oda da shigar da ɗaya ko duka biyun na waɗannan samfuran: - Ƙarin tashar jiragen ruwa (Port 2). Nau'o'in tashar jiragen ruwa akwai: RS232/RS485 keɓewa / ba ware, Ethernet – tashar CANbus Akwai takaddun ƙirar tashar tashar jiragen ruwa akan Unitronics website. 14. Lura cewa haɗa PC ta jiki zuwa mai sarrafawa ta hanyar USB yana dakatar da sadarwar RS232/RS485 ta Port 1. Lokacin da aka cire PC, RS232/RS485 ta dawo.

I/O Fadada
	Ana iya ƙara ƙarin I/Os. Saitunan suna bambanta bisa ga module. Yana goyan bayan dijital, babban sauri, analog, nauyi da ma'aunin zafin jiki I/Os.
Na gida	Ta hanyar I/O Expansion Port. Haɗa har zuwa 8 I/O Expansion Modules wanda ya ƙunshi ƙarin ƙarin I/O 128. Ana buƙatar adaftar (PN EX-A2X).
Nisa	Ta hanyar tashar CANbus. Haɗa har zuwa adaftan 60 zuwa nesa na mita 1000 daga mai sarrafawa; kuma har zuwa 8 I/O fadada kayayyaki zuwa kowane adaftan (har zuwa jimlar 512 I/Os). Ana buƙatar adaftar (PN EX-RC1).

Daban-daban
Agogo (RTC)	Ayyukan agogo na ainihi (kwana wata da lokaci)
Ajiyar baturi	Shekaru 7 na yau da kullun a 25°C, ajiyar baturi don RTC da bayanan tsarin, gami da bayanan canji
Sauya baturi	Ee. Nau'in tsabar kuɗi 3V, baturin lithium, CR2450

Girma
Abu		V130-TRA22 V130J-TRA22	V350-TRA22 V350J-TRA22	V430J-TRA22
Girman	Vxxx	109 x 114.1 x 68mm (4.29 x 4.49 x 2.67"). Duba bayanin kula 15	109 x 114.1 x 68mm (4.29 x 4.49 x 2.67"). Duba bayanin kula 15
	Vxxx-J	109 x 114.1 x 66mm (4.92 x 4.49 x 2.59"). Duba bayanin kula 15	109 x 114.1 x 66mm (4.92 x 4.49 x 2.59"). Duba bayanin kula 15	136 x 105.1 x 61.3mm (5.35 x 4.13 x 2.41"). Duba bayanin kula 15
Nauyi		300g (10.58 oz)	325g (11.46 oz)	355g (12.52 oz)

Bayanan kula:

15. Don ainihin ma'auni, koma zuwa Jagorar Shigarwa na samfur.

Muhalli
Yanayin aiki	0 zuwa 50ºC (32 zuwa 122ºF)
Yanayin ajiya	-20 zuwa 60ºC (-4 zuwa 140ºF)
Dangantakar Humidity (RH)	10% zuwa 95% (ba mai tauri)
Hanyar hawa	An saka panel (IP65/66/NEMA4X) DIN-rail saka (IP20/NEMA1)
Tsayin Aiki	2000m (6562ft)
Girgiza kai	IEC 60068-2-27, 15G, tsawon 11ms
Jijjiga	IEC 60068-2-6, 5Hz zuwa 8.4Hz, 3.5mm akai-akai amplitude, 8.4Hz zuwa 150Hz, 1G hanzari.

Bayanan da ke cikin wannan takarda yana nuna samfurori a ranar bugawa. Unitronics yana da haƙƙi, ƙarƙashin duk dokokin da suka dace, a kowane lokaci, bisa ga ra'ayin sa, kuma ba tare da sanarwa ba, don dakatarwa ko canza fasali, ƙira, kayan aiki da sauran ƙayyadaddun samfuransa, da kuma ko dai na dindindin ko na ɗan lokaci janye kowane daga cikinsu. da forgoing daga kasuwa. Duk bayanan da ke cikin wannan takarda an bayar da su “kamar yadda yake” ba tare da garanti na kowane iri ba, ko dai bayyanawa ko bayyananne, gami da amma ba'a iyakance ga kowane garanti na kasuwanci ba, dacewa don wata manufa, ko rashin cin zarafi. Unitronics ba shi da alhakin kurakurai ko rashi a cikin bayanan da aka gabatar a cikin wannan takaddar. Babu wani yanayi da Unitronics zai zama abin dogaro ga kowane na musamman, na bazata, kaikaice ko lahani na kowane iri, ko duk wani lahani da ya taso daga ko dangane da amfani ko aikin wannan bayanin. Sunayen kasuwanci, alamun kasuwanci, tambura da alamun sabis da aka gabatar a cikin wannan takaddar, gami da ƙirar su, mallakar Unitronics (1989) (R”G) Ltd. ko wasu ɓangarori na uku kuma ba a ba ku izinin amfani da su ba tare da rubutaccen izini na farko ba. na Unitronics ko wani ɓangare na uku wanda zai iya mallake su

UG_V130_350_430-RA22 11/22

Takardu / Albarkatu

unitronics Vision PLC+HMI Mai sarrafa Logic Controller [pdf] Manual mai amfani Vision PLC HMI Mai Gudanar da Logic Mai Gudanarwa, Vision PLC HMI, Mai sarrafa dabaru na shirye-shirye, Mai sarrafa dabaru

Magana

• Manual mai amfani