WAKECAP WC-NODE-A Anchor Node Instruction Manual

WAKECAP WC-NODE-A Anchor Node

Tarihin Bita

Bayanin Samfura

The WakeCap Anchor Node (WC-NODE-A) is a fixed wireless mesh router designed for deployment on construction and industrial sites. It enables network coverage extension and improves positioning accuracy of helmet and asset nodes within the 2.4 GHz WakeCap mesh. Anchors are strategically installed based on project size, coverage, and density requirements.

Ƙididdiga na Fasaha

Abubuwan Amfani Na Musamman

• Extending mesh network coverage across large or complex worksites
• Backbone for positioning accuracy of helmet and asset nodes
• Infrastructure-level network reliability
• NFC tap-to-identify

Hanyoyin Kulawa

Preventive Guidelines

• Inspect housing regularly for cracks, water ingress, or corrosion.
• Verify gasket integrity during inspections.
• Avoid exposure to solvents, oils, or high-pressure water jets.
• Confirm NFC readability and dashboard reporting during site audits.

Madadin Baturi
Battery Type: 3.6V 19Ah ER34615 Lithium D-cell (non-rechargeable)
Estimated Life: 10–12 years depending on reporting interval

Matakan Maye gurbin:

1. Move device to a designated safe maintenance area.
2. Unscrew the four stainless steel M4 hex screws on the enclosure (torque 1.5 Nm).
3. Remove enclosure cap and carefully disconnect PCB JST battery connector.
4. Remove depleted D-cell.
5. Insert new D-cell in correct polarity orientation.
6. Reconnect JST cable to PCB battery connector.
7. Ensure gasket is properly seated before resealing the enclosure.
8. Tighten M4 screws to 1.5 Nm torque.
9. Verify boot-up by tapping the device with NFC to read status.
   Notes: Use ESD-safe tools and dispose of lithium batteries properly.

Umarnin tsaftacewa

• Use soft cloth with mild soap and water.
• Do not use solvents, alcohol-based cleaners, or abrasive pads.
• Ensure humidity membrane is kept clear of debris.

Sabunta Firmware
Firmware is not user-updatable. If required, updates are deployed remotely via the mesh.
For update verification, contact WakeCap support.

Jagoran Shirya matsala

Tsaro & Biyayya

• Ingress Protection: pending
• Compliance: pending
• Battery Safety: Use only ER34615 D-cell. Do not short-circuit, recharge, or expose to fire.

Bayanin Gargaɗi na FCC

An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga sashi na 15 na Dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma ana amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Tsanaki: Duk wani canje-canje ko gyare-gyare ga wannan na'urar da masana'anta ba su amince da su kai tsaye ba na iya ɓata ikon ku na sarrafa wannan kayan aikin.
Wannan na'urar ta bi sashe na 15 na Dokokin FCC. Aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa: (1) Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
An kimanta na'urar don saduwa da buƙatun bayyanar RF gabaɗaya.