Abubuwan da ke ciki
boye
XGT XGL-PMEB Mai Gudanar da Dabarun Shirye-shiryen
Umarnin Amfani da samfur
- Tabbatar cewa an kashe PLC kafin shigarwa.
- Dutsen XGT Pnet XGL-PMEB amintacce a wuri mai dacewa.
- Haɗa igiyoyin da ake buƙata bisa ga zane da aka bayar.
- Samun damar haɗin shirye-shirye ta amfani da software da aka bayar.
- Rubuta dabaru da ayyukan da kuke so dangane da aikace-aikacenku.
- Gwada shirin sosai kafin turawa.
Kulawa
- Duba akai-akai don kowane sako-sako da alaƙa ko alamun lalacewa.
- Tsaftace PLC da kewaye don hana tara ƙura.
- Bi tsarin kulawa da aka bayar a cikin littafin jagorar mai amfani.
FAQ
- Q: Menene zan yi idan PLC ta nuna lambar kuskure?
- A: Koma zuwa littafin mai amfani don jerin lambobin kuskure da yuwuwar mafita. Idan batun ya ci gaba, tuntuɓi tallafin abokin ciniki don taimako.
- Q: Zan iya faɗaɗa abubuwan shigar da abubuwan da ake samu na PLC?
- A: Ee, zaku iya faɗaɗa ƙarfin I/O ta ƙara ƙarin samfura masu dacewa da jerin XGT. Koma zuwa takaddun samfurin don ƙarin bayani kan zaɓuɓɓukan faɗaɗawa.
Wannan jagorar shigarwa yana ba da bayanin aiki mai sauƙi ko sarrafa PLC. Da fatan za a karanta a hankali wannan takaddar bayanan da littafin jagora kafin amfani da samfuran. Musamman karanta matakan tsaro sannan kuma kula da samfuran yadda ya kamata.
Kariyar Tsaro
Ma'anar lakabin gargaɗi da taka tsantsan
- GARGADI yana nuna haɗarin haɗari wanda, idan ba a guji shi ba, na iya haifar da mutuwa ko rauni mai tsanani
- HANKALI yana nuna yanayi mai haɗari wanda, idan ba a kauce masa ba, zai iya haifar da ƙananan rauni ko matsakaici. Hakanan ana iya amfani dashi don faɗakar da ayyuka marasa aminci
GARGADI
- Kada a tuntuɓi tashar yayin amfani da wutar.
- Tabbatar cewa babu wasu abubuwan ƙarfe na waje.
- Kar a sarrafa baturin (caji, tarwatsa, bugawa, gajere, siyarwa).
HANKALI
- Tabbatar duba ƙimar ƙimatage da tsarin tasha kafin wayoyi
- Lokacin yin wayoyi, ƙara ƙara dunƙule toshewar tashar tare da ƙayyadadden kewayon juzu'i
- Kada a shigar da abubuwa masu ƙonewa a cikin kewaye
- Kar a yi amfani da PLC a cikin yanayin girgiza kai tsaye
- Sai dai ma'aikatan sabis na ƙwararru, kar a tarwatsa ko gyara, ko gyara samfurin
- Yi amfani da PLC a cikin mahallin da ya dace da ƙayyadaddun bayanai da ke ƙunshe a cikin wannan takardar bayanan.
- Tabbatar cewa nauyin waje bai wuce ƙimar samfurin fitarwa ba.
- Lokacin zubar da PLC da baturi, ɗauki shi azaman sharar masana'antu.
- Za a yi wa siginar I/O ko layin sadarwa aƙalla 100mm nesa da babban ƙarfin wutatage na USB ko layin wuta.
Yanayin Aiki
Don shigarwa, kiyaye sharuɗɗan da ke ƙasa.
| A'a | Abu | Ƙayyadaddun bayanai | Daidaitawa | ||||
| 1 | Nau'in yanayi | 0 ~ 55 ℃ | – | ||||
| 2 | Yanayin ajiya. | -25 ~ 70 ℃ | – | ||||
| 3 | Yanayin yanayi | 5 ~ 95% RH, mara sanyaya | – | ||||
| 4 | Yanayin ajiya | 5 ~ 95% RH, mara sanyaya | – | ||||
|
5 |
Resistance Vibration |
Jijjiga lokaci-lokaci | – | – | |||
| Yawanci | Hanzarta | Amplitude | Lokaci |
Saukewa: IEC61131-2 |
|||
| 5≤f<8.4㎐ | – | 3.5mm ku | Sau 10 a kowace hanya
domin X da Z |
||||
| 8.4≤f≤150㎐ | 9.8 (1 g) | – | |||||
| Ci gaba da girgiza | |||||||
| Yawanci | Hanzarta | Amplitude | |||||
| 5≤f<8.4㎐ | – | 1.75mm ku | |||||
| 8.4≤f≤150㎐ | 4.9 (0.5 g) | – | |||||
Software na Tallafi Mai Aiwatarwa
Don tsarin tsarin, sigar mai zuwa ya zama dole.
- XGI CPU: V2.0 ko sama
- XGK CPU: V2.0 ko sama
- XGR CPU: V1.0 ko sama
- XG5000 Software: V4.2 ko sama
Na'urorin haɗi da Ƙayyadaddun Kebul
Duba Haɗin Profibus da ke ƙunshe a cikin akwatin
- Amfani: Haɗin Sadarwar Profibus
- Abu: GPL-CON
Lokacin amfani da sadarwar Pnet, za a yi amfani da kebul na murɗaɗɗen garkuwa tare da la'akari da nesa da saurin sadarwa.
- Mai ƙira: Belden ko wanda ya yi daidai da ƙayyadaddun kayan da ke ƙasa
- Ƙimar Kebul
| Rabewa | Bayani | |
| AWG | 22 |  |
| Nau'in | BC (Bare Copper) | |
| Insulation | Polyethylene (PE) | |
| Diamita (inch) | 0.035 | |
| Garkuwa | Aluminum Foil-Polyester,
Garkuwar Tef/Braid |
|
| Iyakar (pF/ft) | 8.5 | |
| Halayen tashe-tashen hankula (Ω) | 150Ω | |
Sunan sassan da Girma (mm)
- Wannan shine bangaren gaba na Module. Koma zuwa kowane suna lokacin aiki da tsarin. Don ƙarin bayani, koma zuwa littafin jagorar mai amfani.
LED bayani
| Siliki | Bayani | |
| GUDU | On | Fara aiki cikakke kuma na yau da kullun |
| Kashe | Kuskure mai kisa | |
| I/F | Kifta ido | Matsayi na yau da kullun tare da CPU |
| Kashe | Kuskure a matsayin mu'amala tare da CPU | |
|
HS |
On | Matsayin sadarwar haɗin gwiwar HS na al'ada |
| Kifta ido | Dakatar da matsayin sadarwa/zazzagewar siga a cikin hanyar haɗin HS | |
| Kashe | Sabis na Link na HS yana kashe matsayi | |
|
P2P |
On | Matsayin sadarwar P2P na al'ada |
| Kifta ido | Dakatar da yanayin sadarwa/zazzagewar siga a cikin P2P don kunnawa | |
| Kashe | P2P yana kashe matsayi | |
| P-RUN | On | Sadarwa ta al'ada |
| Kashe | An dakatar da sadarwa | |
| MATSAYI | On | Kuskuren tsarin |
| Kashe | Sadarwa ta al'ada | |
|
ERR |
On | An kawar da dukan bayi |
| Kifta ido | An kawar da wasu bayi | |
| Kashe | Sadarwa ta al'ada | |
|
CFG |
On | Babu saitin hanyar sadarwa don tsarin Profibus-DP Master module |
| Kifta ido | Zazzagewa ko loda sigogin daidaitawa zuwa tsarin Jagora | |
| Kashe | An shigar da saitin hanyar sadarwa cikin nasara | |
Shigar da Cire Modules
Anan yayi bayanin hanyar da za a haɗa kowane module zuwa tushe ko cire shi.
Tsarin shigarwa
- Saka ƙayyadadden tsinkaya na ƙananan ɓangaren PLC cikin ƙayyadadden ramin ƙirar tushe
- Zamar da ɓangaren sama na ƙirar don gyara shi zuwa tushe, sa'an nan kuma ya dace da tushe ta hanyar amfani da madaidaicin madaidaicin module.
- Ja babban ɓangaren tsarin don bincika idan an shigar da shi zuwa tushe gaba ɗaya.
Cire module
- Sake kafaffen sukurori na ɓangaren sama na module daga tushe
- Ta hanyar latsa ƙugiya, cire ɓangaren sama na ƙirar daga axis na ƙananan ɓangaren tsarin
- Ta hanyar ɗaga ƙirar zuwa sama, cire lever ɗin lodi na module daga ramin gyarawa
Waya
Rigakafin wayoyi
- Layin shigarwa: An haɗa layin kore zuwa A1, layin ja yana haɗa da B1
- Layin fitarwa: An haɗa layin kore zuwa A2, layin ja yana haɗa da B2
- Haɗa garkuwa zuwa clamp na mai haɗawa
- Idan ana shigar da mai haɗawa a tashar, shigar da kebul a A1, B1
- Don ƙarin bayanin waya, koma zuwa littafin mai amfani.
Garanti
- Lokacin garanti shine watanni 36 daga ranar da aka yi.
- Ya kamata mai amfani ya gudanar da binciken farko na kurakurai. Koyaya, akan buƙata, LS ELECTRIC ko wakilanta zasu iya ɗaukar wannan aikin akan kuɗi. Idan aka gano dalilin laifin alhakin LS ELECTRIC ne, wannan sabis ɗin zai zama kyauta.
Keɓancewa daga garanti
- Sauya sassa masu amfani da rayuwa (misali relays, fuses, capacitors, batura, LCDs, da sauransu)
- Rashin gazawa ko lalacewa ta hanyar rashin dacewa ko mu'amala a wajen waɗanda aka kayyade a cikin littafin mai amfani
- Rashin gazawar abubuwan waje marasa alaƙa da samfurin
- Rashin gazawar da aka samu ta hanyar gyare-gyare ba tare da izinin LS ELECTRIC ba
- Amfani da samfurin ta hanyoyin da ba a yi niyya ba
- Kasawar da ba za a iya annabta/warware su ta hanyar fasahar kimiyya na yanzu a lokacin kera ba
- Rashin gazawa saboda abubuwan waje kamar wuta, mahaukaci voltage, ko bala'o'i
- Wasu lokuta waɗanda LS ELECTRIC ba ta da alhakin su
Don cikakken bayanin garanti, da fatan za a koma zuwa littafin jagorar mai amfani.
Abubuwan da ke cikin jagorar shigarwa ana iya canzawa ba tare da sanarwa don haɓaka aikin samfur ba.
TUNTUBE
- Abubuwan da aka bayar na LS ELECTRIC Co., Ltd. www.ls-electric.com 10310001626 V1.3 (2024.6)
- Imel: automation@ls-electric.com
- Hedikwata/Ofishin Seoul Tel: 82-2-2034-4033,4888,4703
- Ofishin LS ELECTRIC Shanghai (China) Tel: 86-21-5237-9977
- LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Tel: 86-510-6851-6666
- LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Tel: 84-93-631-4099
- LS ELECTRIC Gabas ta Tsakiya FZE (Dubai, UAE) Tel: 971-4-886-5360
- LS ELECTRIC Turai BV (Hoofddorf, Netherlands) Tel: 31-20-654-1424
- LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) Tel: 81-3-6268-8241
- LS ELECTRIC America Inc. (Chicago, Amurka) Tel: 1-800-891-2941
- Ma'aikata: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea
Takardu / Albarkatu
 |
XGT XGL-PMEB Mai Gudanar da Dabarun Shirye-shiryen [pdf] Jagoran Shigarwa XGK-28, XGL-PMEB, XGL-PMEB Mai Gudanar da Dabarun Shirye-shiryen XGL-PMEB |