LS GSL-D22C Jagorar Shigar Mai Kula da Ma'ana Mai Shirye
Wannan jagorar shigarwa yana ba da bayanin aiki mai sauƙi ko sarrafa PLC. Da fatan za a karanta a hankali wannan takaddar bayanan da littafin jagora kafin amfani da samfuran. Musamman karanta taka tsantsan sannan sarrafa samfuran yadda yakamata.
Kariyar Tsaro
- Ma'anar lakabin gargaɗi da taka tsantsan
GARGAƊI yana nuna wani yanayi mai haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da mutuwa ko rauni mai tsanani.
HANKALI yana nuna yanayi mai yuwuwar haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da ƙaramin rauni ko matsakaici.
Hakanan ana iya amfani dashi don faɗakar da ayyuka marasa aminci
GARGADI
- Kada a tuntuɓi tashar yayin amfani da wutar.
- Tabbatar cewa babu wasu abubuwan ƙarfe na waje.
- Kar a sarrafa baturin (caji, tarwatsa, bugawa, gajere, siyarwa).
HANKALI
- Tabbatar duba ƙimar ƙimatage da tsarin tasha kafin wayoyi
- Lokacin yin wayoyi, ƙara ƙara dunƙule toshewar tasha tare da ƙayyadadden kewayon juzu'i
- Kada a shigar da abubuwa masu ƙonewa akan kewaye
- Kada kayi amfani da PLC a cikin mahallin girgiza kai tsaye
- Sai dai ƙwararrun ma'aikatan A/S, kar a sake haɗawa ko gyara ko gyara samfurin
- Yi amfani da PLC a cikin mahallin da ya dace da ƙayyadaddun bayanai da ke ƙunshe a cikin wannan takardar bayanan.
- Tabbatar cewa lodin waje bai wuce kimar tsarin aikin fitarwa ba.
- Lokacin zubar da PLC da baturi, ɗauki shi azaman sharar masana'antu.
- Za a yi wa siginar I/O ko layin sadarwa aƙalla 100mm nesa da babban wutatage na USB ko layin wuta.
Yanayin Aiki
- Don shigarwa, kiyaye sharuɗɗan da ke ƙasa.
| A'a | Abu | Ƙayyadaddun bayanai | Daidaitawa | ||||
| 1 | Nau'in yanayi | 0 ~ 55 ℃ | – | ||||
| 2 | Yanayin ajiya. | -25 ~ 70 ℃ | – | ||||
| 3 | Yanayin yanayi | 5 ~ 95% RH, mara sanyaya | – | ||||
| 4 | Yanayin ajiya | 5 ~ 95% RH, mara sanyaya | – | ||||
| 5 | Resistance Vibration | Jijjiga lokaci-lokaci | – | – | |||
| Yawanci | Hanzarta | Saukewa: IEC61131-2 | |||||
| 5≤f<8.4㎐ | – | 3.5mm ku | Sau 10 a kowace hanya don X, Y, Z | ||||
| 8.4≤f≤150㎐ | 9.8 (1 g) | – | |||||
| Ci gaba da girgiza | |||||||
| Yawanci | Yawanci | Yawanci | |||||
| 5≤f<8.4㎐ | – | 1.75mm ku | |||||
| 8.4≤f≤150㎐ | 4.9 (0.5 g) | – | |||||
Na'urorin haɗi da Ƙayyadaddun Kebul
- Duba mahaɗin Modbus wanda ke ƙunshe a cikin akwatin
- Amfani: Mai Haɗin Sadarwa na Modbus
- Abu: GSL-CON
- Lokacin amfani da tashar sadarwar RS-422 ko RS-485, za a yi amfani da murɗaɗɗen kebul na igiya tare da la'akari da nesa da saurin sadarwa.
- Abu: Ƙarƙashin Ƙarfin LAN Interface Cable
- Nau'in: LIREV-AMESB
- Girma: 2P X 22AWG(D/0.254 TA)
- Mai ƙira: LS Cable Co., Ltd
- Halayen lantarki
| Abubuwa | Naúrar | Halaye | Sharadi |
| Resistance Mai Gudanarwa | Ω/km | 59 ko fiye | 25 ℃ |
| Juriya Voltage (DC) | V/1 min | 500V, 1 min. | A cikin iska |
| Juriya na Insulation | MΩ-km | 1,000 ko fiye | 25 ℃ |
| Iyawa | Pf/M | 45 ko fiye | 1kHz |
| Tasirin Halaye | Ω | 120± 12 | 10MHz |
Girma (mm)
- Wannan ɓangaren gaba ne na samfurin. Don ƙarin bayani, koma zuwa littafin jagorar mai amfani.
Ƙayyadaddun Ayyuka
- Wannan ƙayyadaddun ayyuka ne na samfurin. Don ƙarin bayani, koma zuwa littafin mai amfani.
| Abu | GSL-D2xC | GSL-DT4C/C1 | GSL-TRxC/C1 | GSL-RY2C |
| Baud darajar | 2,400 ~ 38,400 bps | |||
| Yarjejeniya | Modbus RTU | |||
| Ƙididdigar shigarwa na Yanzu | 5mA | – | – | |
| Ma'aunin nauyi voltage | – | DC24V | DC24V/AC220V,2A/Point, 5A/COM | |
| Matsakaicin kaya | – | 0.5A/Point, 3A/COM | DC 110V, AC 250V1,200 sau / hour | |
| ON Voltage | DC 19V ko sama da haka | Mafi ƙarancin kaya voltage/ na yanzu DC 5V/1mA | ||
| KASHE Voltage | DC 6V ko ƙasa da haka | |||
Tsarin Toshe Tasha don Wayar I/O
- Wannan shi ne shimfidar toshe tasha don wayoyi na I/O. Koma zuwa kowane suna lokacin tuƙi tsarin.
Don ƙarin bayani, koma zuwa littafin mai amfani.
Waya
- Waya don Sadarwa
- Don ƙarin bayani game da wayoyi, koma zuwa littafin mai amfani.
Garanti
- Lokacin garanti shine watanni 36 daga ranar da aka yi.
- Ya kamata mai amfani ya gudanar da binciken farko na kurakurai. Koyaya, akan buƙata, LS ELECTRIC ko wakilanta zasu iya ɗaukar wannan aikin akan kuɗi. Idan aka gano dalilin laifin alhakin LS ELECTRIC ne, wannan sabis ɗin zai zama kyauta.
- Keɓancewa daga garanti
- Sauya sassa masu amfani da rayuwa (misali relays, fuses, capacitors, batura, LCDs, da sauransu)
- Rashin gazawa ko lalacewa ta hanyar rashin dacewa ko mu'amala a wajen waɗanda aka kayyade a cikin littafin mai amfani
- Rashin gazawar abubuwan waje marasa alaƙa da samfurin
- Rashin gazawar da aka samu ta hanyar gyare-gyare ba tare da izinin LS ELECTRIC ba
- Amfani da samfurin ta hanyoyin da ba a yi niyya ba
- Kasawar da ba za a iya annabta/warware su ta hanyar fasahar kimiyya na yanzu a lokacin kera ba
- Rashin gazawa saboda abubuwan waje kamar wuta, mahaukaci voltage, ko bala'o'i
- Wasu lokuta waɗanda LS ELECTRIC ba ta da alhakin su
- Don cikakken bayanin garanti, da fatan za a koma zuwa littafin jagorar mai amfani.
- Abubuwan da ke cikin jagorar shigarwa ana iya canzawa ba tare da sanarwa don haɓaka aikin samfur ba.
Alamomi
Lambar QR
Abubuwan da aka bayar na LS ELECTRIC Co., Ltd.
www.ls-electric.com
10310000311 V4.2 (2024.6)
- Imel: automation@ls-electric.com
- Headquarter/Ofishin Seoul
- Ofishin LS ELECTRIC Shanghai (China)
- LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China)
- LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam)
- LS ELECTRIC Gabas ta Tsakiya FZE (Dubai, UAE)
- LS ELECTRIC Turai BV (Hoofddorf, Netherlands)
- LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan)
- LS ELECTRIC America Inc. (Chicago, Amurka)
- Tel: 1-800-891-2941
- Tel: 82-2-2034-4033,4888,4703
- Tel: 86-21-5237-9977
- Tel: 86-510-6851-6666
- Tel: 84-93-631-4099
- Tel: 971-4-886-5360
- Tel: 31-20-654-1424
- Tel: 81-3-6268-8241
Takardu / Albarkatu
 |
LS GSL-D22C Mai Kula da Hankali Mai Shirye [pdf] Jagoran Shigarwa GSL-D22C Mai Sarrafa dabaru, GSL-D22C, Mai sarrafa dabaru, Mai sarrafa dabaru, Mai sarrafawa |
