LS XBM-DN32H Mai Kula da Hankali Mai Shirye
Ƙayyadaddun samfur
- Saukewa: 10310001549
- Samfura: Mai sarrafa dabaru na shirye-shirye - XGB CPU (Modular)
- Moduloli masu jituwa: XBM-DN32H, XBM/XEM-DR14H2, XBM/XEM-DN/DP16/32H2, XBM/XEM-DN/DP32HP
- Girma: 6mm x 6mm x 6mm
- Yanayin Aiki: Yanayin zafi -55°C zuwa 70°C, Humidity 5%RH zuwa 95%RH
Umarnin Amfani da samfur
- Tabbatar cewa an kashe naúrar PLC kafin shigarwa.
- Haɗa na'urori masu jituwa (XBM-DN32H, XBM/XEM-DR14H2, XBM/XEM-DN/DP16/32H2, XBM/XEM-DN/DP32HP) kamar yadda ake buƙata.
- Ajiye ɗora sashin PLC a wuri mai dacewa bin jagororin masana'anta.
Kanfigareshan
- Haɗa kebul na USB-301A zuwa PLC don shirye-shirye.
- Yi amfani da na'urorin haɗi na C40HH-SB-XB da XTB-40H(TG7-1H40S) don ƙarin ayyuka tare da na'urori masu jituwa.
Aiki
Tabbatar cewa duk haɗin suna amintacce kuma PLC tana kunne. Saka idanu alamomin matsayi don ingantaccen aiki.
Kulawa
Duba sashin PLC akai-akai don kowane alamun lalacewa ko lalacewa.
Tsaftace naúrar kuma kuɓuta daga tarin ƙura.
Tambayoyin da ake yawan yi (FAQ)
Tambaya: Menene kewayon zafin aiki na PLC?A: Yanayin zafin aiki shine -55°C zuwa 70°C.
Wannan jagorar shigarwa yana ba da bayanin ayyuka masu sauƙi na sarrafa PLC. Da fatan za a karanta a hankali wannan takaddar bayanan da littafin jagora kafin amfani da samfuran. Musamman karanta matakan tsaro da sarrafa samfuran yadda ya kamata.
Kariyar Tsaro
Ma'anar rubutun gargaɗi da taka tsantsan
GARGADI
GARGAƊI na nuna yanayi mai yuwuwar haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da mutuwa ko rauni mai tsanani.
HANKALI
HANKALI yana nuna yanayi mai yuwuwar haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da ƙaramin rauni ko matsakaici.
Hakanan ana iya amfani dashi don faɗakar da ayyuka marasa aminci.
GARGADI
- Kada a tuntuɓi tashar yayin amfani da wutar.
- Kare samfurin daga shiga cikin kayan karafa na kasashen waje.
- Kar a sarrafa baturin. (Caji, tarwatsa, bugawa, gajere, siyarwa)
HANKALI
- Tabbatar duba ƙimar ƙimatage da tsarin tasha kafin wayoyi.
- Lokacin yin wayoyi, ƙara ƙara dunƙule toshewar tasha tare da ƙayyadadden kewayon juzu'i.
- Kada a shigar da abubuwa masu ƙonewa akan kewaye.
- Kada kayi amfani da PLC a cikin mahallin girgiza kai tsaye.
- Sai dai ma'aikatan sabis na ƙwararru, kar a sake haɗawa ko gyara ko gyara samfurin.
- Yi amfani da PLC a cikin mahallin da ya dace da ƙayyadaddun bayanai da ke ƙunshe a cikin wannan takardar bayanan.
- Tabbatar cewa nauyin waje bai wuce ƙimar samfurin fitarwa ba.
- Lokacin zubar da PLC da baturi, ɗauki shi azaman sharar masana'antu.
Yanayin Aiki
Don shigarwa, kiyaye sharuɗɗan da ke ƙasa.
| A'a | Abu | Ƙayyadaddun bayanai | Daidaitawa | ||||
| 1 | Nau'in yanayi | 0 ~ 55 ℃ | – | ||||
| 2 | Yanayin ajiya. | -25 ~ 70 ℃ | – | ||||
| 3 | Yanayin yanayi | 5 ~ 95% RH, mara sanyaya | – | ||||
| 4 | Yanayin ajiya | 5 ~ 95% RH, mara sanyaya | – | ||||
| 5 | Resistance Vibration | Jijjiga lokaci-lokaci | – | – | |||
| Yawanci | Hanzarta | Amplitude | Lokaci | Saukewa: IEC61131-2 | |||
| 5≤f<8.4㎐ | – | 3.5mm ku | Sau 10 a kowace hanya donX, Y, Z | ||||
| 8.4≤f≤150㎐ | 9.8 (1 g) | – | |||||
| Ci gaba da girgiza | |||||||
| Yawanci | Hanzarta | Amplitude | |||||
| 5≤f<8.4㎐ | – | 1.75mm ku | |||||
| 8.4≤f≤150㎐ | 4.9 (0.5 g) | – | |||||
Ƙayyadaddun Ayyuka
Tebur mai zuwa yana nuna ƙayyadaddun ƙayyadaddun bayanai na XGB. Don ƙarin bayani, da fatan za a koma zuwa littafin mai amfani.
Gabaɗaya Bayani
| Abubuwa | Ƙayyadaddun bayanai |
| Hanyar aiki | Maimaita aiki, ƙayyadaddun aikin sake zagayowar,
Katse aiki, duban lokaci akai-akai |
| Hanyar sarrafa I/O | sarrafa tsari ta hanyar duba lokaci guda (hanyar wartsakewa),
Jagoranci ta hanyar umarnin shirin |
| Gudun sarrafawa
(Tasirin koyarwa) |
Nau'in XBM-H: 83ns/mataki, nau'in XBM/XEM-H2/HP:
40ns/mataki |
| Ƙarfin ƙwaƙwalwar ajiya (MK) | Nau'in H: 20Kstep, H2/HP Nau'in: 64Ksteps |
| Ƙarfin ƙwaƙwalwar ajiya (IEC) | Nau'in H2/HP: 384Kbyte |
| Matsakaicin fadada stages | Babban + Fadada 7slot
(Saduwa: max 2slot, Babban gudun I/F: max 2 slot) |
| Yanayin aiki | GUDU, TSAYA, GUDU |
| Aikin gano kansa | Jinkirta aiki, ƙarancin ƙwaƙwalwar ajiya, I/O mara kyau |
| tashar tashar jiragen ruwa | USB (1ch) |
| Hanyar adanawa | Saita wurin latch a ainihin siga |
| RTC | Yana aiki na kwanaki 183 (25 ℃), lokacin da wuta ke kashe bayan caji (3.0V) |
| Ayyukan da aka gina | Cnet(RS-232, RS-485), Enet, PID, Matsayi mai saurin sauri:
|
Software na Tallafi Mai Aiwatarwa
Don tsarin tsarin, sigar mai zuwa ya zama dole.
- XG5000 Software
- XBM-DN32H, XBM-DN/DP32H2, XBM-DN/DP32HP: V4.22 ko sama
- XEM-DN/DP32H2, XEM-DN/DP32HP: V4.26 ko sama
- XBM/XEM-DN/DP16H2, XBM/XEM-DR14H2: V4.75 ko sama
- O / S
- XBM-DN32H: O/S V1.0 ko sama
- XBM-DN/DP32H2, XBM-DN/DP32HP: O/S V2.0 ko sama
- XEM-DN/DP32H2, XEM-DN/DP32HP: O/S V2.1 ko sama
- XBM/XEM-DN/DP16H2, XBM/XEM-DR14H2: O/S V3.0 ko sama
Na'urorin haɗi da Ƙayyadaddun Kebul
Duba abin da ke cikin kunshin.
- XGB-POWER(3P): Kebul na wutar lantarki don haɗa 24V
Duba kayan haɗi. Sayi shi, idan an buƙata.
- USB-301A: Kebul na haɗin USB (zazzagewa).
- C40HH-□□SB-XBI : XBM/XEM-DN/DP32H/H2/HP Babban hanyar shigar/haɗin fitarwa
- XTB-40H(TG7-1H40S):XBM/XEM-DN/DP32H/H2/HP Main naúrar shigarwa/fitarwa Tasha Toshe
Sunan sassan da Girma (mm)
Wannan bangare ne na gaba na CPU. Koma zuwa kowane suna lokacin tuƙi tsarin. Don ƙarin bayani, koma zuwa littafin mai amfani.
Input/Fitarwa mai nuna alamar LED- Mai haɗawa / fitarwa
- Gina-in RS-232/485 mai haɗawa
- Mai haɗa wuta
- Mai haɗa haɗin Enet da aka gina a ciki
- Yanayin S/W, Murfin USB
- Matsayin alamar LED
- RS-485Termination Resistor Canja
Shigarwa / Cire Modules
Anan yayi bayanin hanyar haɗawa da cire kowane samfur.
- Tsarin shigarwa
- Cire murfin Extension a gefen dama-kasa na samfurin.
- Tura samfurin kuma haɗa shi a jeri tare da ƙugiya don gyara gefuna huɗu da ƙugiya don haɗi a ƙasa.
- Bayan haɗi, danna ƙasa don gyarawa kuma gyara shi gaba ɗaya.
- Cire module
- Latsa ƙugiya don haɗi sannan kuma cire samfurin da hannaye biyu. (Kada a cire samfurin da karfi.)
Ƙimar wutar lantarki
Anan yayi bayanin ƙayyadaddun wutar lantarki na XGB. Don ƙarin bayani, koma zuwa littafin mai amfani.
| Abubuwa | Ƙayyadaddun bayanai | |
|
Bayanin iko |
An ƙaddara voltage | DC24V |
| Shigar da kunditage kewayon | DC20.4 ~ 28.8V (-15%, + 20%) | |
| Shigar da halin yanzu | 1A (Typ.550㎃) | |
| Izinin gazawar wutar lantarki na ɗan lokaci | Kasa da 1㎳ | |
Garanti
- Lokacin garanti shine watanni 36 daga ranar da aka yi.
- Ya kamata mai amfani ya gudanar da binciken farko na kurakurai. Koyaya, idan an buƙata, LSELECTRIC ko wakilinsa na iya ɗaukar wannan aikin akan kuɗi. Idan an gano dalilin kuskuren alhakin LS ELECTRIC ne, wannan sabis ɗin zai zama kyauta.
Keɓancewa daga garanti
- Sauya sassa masu amfani da rayuwa (misali relays, fuses, capacitors, batura, LCDs, da sauransu)
- Rashin gazawa ko lalacewa ta hanyar rashin dacewa ko mu'amala a wajen waɗanda aka kayyade a cikin littafin mai amfani
- Rashin gazawar abubuwan waje marasa alaƙa da samfurin
- Rashin gazawar da aka samu ta hanyar gyare-gyare ba tare da izinin LS ELECTRIC ba
- Amfani da samfurin ta hanyoyin da ba a yi niyya ba
- Kasawar da ba za a iya annabta/warware su ta hanyar fasahar kimiyya na yanzu a lokacin kera ba
- Rashin gazawa saboda abubuwan waje kamar wuta, mahaukaci voltage, ko bala'o'i
- Wasu lokuta waɗanda LS ELECTRIC ba ta da alhakin su
- Don cikakken bayanin garanti, da fatan za a koma zuwa littafin jagorar mai amfani.
- Abubuwan da ke cikin jagorar shigarwa ana iya canzawa ba tare da sanarwa don haɓaka aikin samfur ba.
Abubuwan da aka bayar na LS ELECTRIC Co., Ltd. www.ls-electric.com 10310001549 V5.8 (2024.06)
Imel: automation@ls-electric.com
- Headquarter/Ofishin Seoul
Lambar waya: 82-2-2034-4033,4888,4703 - Ofishin LS ELECTRIC Shanghai (China)
Lambar waya: 86-21-5237-9977 - LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China)
Lambar waya: 86-510-6851-6666 - LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam)
Lambar waya: 84-93-631-4099 - LS ELECTRIC Gabas ta Tsakiya FZE (Dubai, UAE)
Lambar waya: 971-4-886-5360 - LS ELECTRIC Turai BV (Hoofddorf, Netherlands)
Lambar waya: 31-20-654-1424 - LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan)
Lambar waya: 81-3-6268-8241 - LS ELECTRIC America Inc. (Chicago, Amurka)
Waya: 1-800-891-2941 - Ma'aikata: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnam-do, 31226, Korea
Takardu / Albarkatu
 |
LS XBM-DN32H Mai Kula da Hankali Mai Shirye [pdf] Jagoran Shigarwa XBM-DN32H Mai Kula da Logic Mai Shirye-shiryen, XBM-DN32H, Mai Sarrafa Dabaru, Mai sarrafa dabaru, Mai sarrafawa |
