prodatakey PDK-CLOUDNODE-SE Jagorar Mai Amfani da Node Controller

PDK-CLOUDNODE-SE Mai Kula da Node na Red Cloud

Bayanin samfur

Mai Kula da Node na Red Cloud na'ura ce da ake amfani da ita don tsarin sarrafawa. Ya zo tare da fakitin da ya haɗa da makullin maɓalli, diode, jagoran baturi, masu tsalle-tsalle, alamu, sukukan rufewa, injin wuta (14 VDC, 2 Amp), da kuma Red Cloud Node Controller kanta. Mai sarrafawa yana da OSDP, WUTA ZUCIYA, LINK RELAY, + BUS, da - fasalulluka na BUS.

Umarnin Amfani da samfur

1. Mai Kula da Haɗawa: Dutsen shingen Red CN amintacce zuwa bango. Haɗa OSDP, POWER HEART, da LINK RELAY wayoyi zuwa tashoshin su daban-daban.
2. Haɗin Karatu: Hana mai karatu a ƙofar kuma haɗa shi zuwa mai sarrafawa ta amfani da waya 22/5 ko 22/6. Tabbatar duba polarity da voltage kafin kunna mai sarrafawa. Sanya jumper don kunna OSDP.
3. Haɗin Shigar A/DPS: Dutsen DPS akan firam ɗin ƙofar kuma haɗa shi zuwa mai sarrafawa ta amfani da waya 22/2. Lokacin amfani da na'urori masu auna firikwensin DPS guda biyu don ƙofofi biyu, yi musu waya a jere tare da madugu biyu kawai suna gudu zuwa ga mai sarrafawa don haɗi.
4. Shigar da Haɗin B/REX: Gudun waya 18/2 daga Maglock zuwa Mai Kula da Ƙofa kuma haɗa shi zuwa Maglock kamar yadda aka nuna. Dutsen REX a wurin da ake so kuma haɗa shi zuwa mai sarrafawa da Maglock ta amfani da waya 18/5. Yi amfani da toshe mai tsalle don zayyana (+) ko (-) allo voltage daga NO da NC. Idan ba a buƙatar rahoto a cikin tsarin, kawai cire kore mai lakabin waya.
5. Kulle Relay: Haɗa diode zuwa yajin tare da launin toka mai launin toka na diode akan tabbatacce kuma baki akan korau. Haɗa mummunan (-) na maglock ko yajin zuwa NC akan mai kula da kofa idan ana amfani da maglocks ko buga a cikin tsari mai aminci. Haɗa mummunan (-) na yajin zuwa NO akan mai kula da ƙofa idan amfani da yajin aiki a cikin tsari mara inganci.
6. Haɗin Sadarwa: Haɗa OSDP, ZUCIYA WUTA, LINK RELAY, + BUS, da - Wayoyin BUS zuwa tashoshin su daban-daban.
7. Haɗin Wuta: Haɗa mai sarrafawa zuwa haɗin Intanet kai tsaye don shirye-shirye da dalilai na gudanarwa.
8. Cloud Node Rajista: Yi rijista Mai Kula da Node na Red Cloud akan dandalin tushen girgije don samun damar abubuwan tushen girgije.

Abubuwan Kunshin

Mai Kula da Dutsen Wuta

Dutsen - Dutsen shingen Red CN amintacce zuwa bango.

Hadin Karatu

• Mai karatu - An ɗora mai karatu a ƙofar tare da waya 22/5 ko 22/6 yana gudana zuwa mai kula da ƙofar. Waya mai karatu zuwa ga mai sarrafawa kamar yadda aka nuna a sama. Tabbatar duba polarity da voltage kafin kunna mai sarrafawa.
• OSDP - Sanya jumper don kunna OSDP (duba jagorar tunani na OSDP a ƙarshen wannan jagorar don ƙarin bayani)

Shigar A / DPS Connection

• DPS (Maɓallin Matsayin Ƙofar) - An ɗora DPS akan firam ɗin ƙofar a wurin da ake so tare da waya 22/2 da ke gudana daga DPS zuwa mai sarrafawa. Waya DPS zuwa mai sarrafawa kamar yadda aka nuna a sama. Lokacin amfani da na'urori masu auna firikwensin DPS guda biyu don ƙofofi biyu za ku yi waya da su a jere tare da madugu biyu kawai suna komawa zuwa ga mai sarrafawa don haɗi.
• Shigarwar AUX - Ana iya saita ƙa'ida don haifar da abubuwan da suka faru ko abubuwan da aka fitar dangane da wannan shigar da shigar.

Shigar B / REX Haɗin

• Maglock - Lokacin shigar da Maglock yana da kama da shigar da REX (Neman fita) a ƙofar don fita kyauta. Gudun waya 18/2 daga Maglock zuwa Mai Kula da Ƙofa, haɗa zuwa Maglock kamar yadda aka nuna.
• REX (Buƙatar fita) - An ɗora REX a cikin wurin da ake so tare da 18/5 waya gudu daga REX zuwa mai sarrafawa. Waya REX zuwa mai sarrafawa da maglock kamar yadda aka nuna a sama. Idan ba a buƙatar rahoto a cikin tsarin, kawai cire kore mai lakabin waya.
• Jumper Block – Yi amfani da shi don zayyana (+) ko (-) allo voltage daga NO da NC. Idan an kashe jumper, gudun ba da sanda daidaitaccen busasshiyar lamba ce da ke buƙatar shigarwa a ciki
• Shigar B - Ana iya saita ƙa'ida don haifar da abubuwan da suka faru ko abubuwan da aka fitar bisa wannan faɗakarwar shigarwar

Kulle Relay

• Diode - Dole ne a shigar da diode da aka bayar lokacin amfani da yajin aiki. Shigar da yajin aiki tare da ratsin launin toka na diode akan tabbatacce kuma baki akan korau.
• NC - An yi amfani da shi don maglocks (ko buge a cikin tsarin rashin aminci). Haɗa mummunan (-) na maglock ko buga zuwa NC akan mai kula da ƙofar.
• A'a - Ana amfani da shi don yajin aiki a cikin tsari mai aminci. Haɗa mummunan (-) yajin zuwa NO akan mai kula da kofa.
• Jumper Block – Yi amfani da shi don zayyana (+) ko (-) allo voltage daga NO da NC. Idan jumper ya kashe, gudun ba da sanda daidaitaccen busasshiyar lamba ce da ke buƙatar shigarwa a ciki

Haɗin Sadarwa

• Network - Ana buƙatar haɗin Intanet kai tsaye don tsarawa da sarrafa Node Red Cloud.

Haɗin Wuta

• DC INPUT - An haɗa da 14 VDC, 2 amp Transformer don wutar lantarki DC
  shigarwa. Ana ba da shawarar yin amfani da waya 18/2. Domin high-voltage aikace-aikace, yi amfani da HV Converter (PN: HVC).
• BATTERY - Yakin zai dace da mafi yawan batura 12 VDC 8 Ah. An haɗa baturin tare da samar da jagororin kuma yana da kula da polarity. Karɓi har zuwa awanni 8 na ajiyar baturi ta amfani da yajin aiki cikin aminci.

Cloud Node Rajista

• Shiga cikin asusunku a pdk.io kuma danna alamar ƙari + kusa da Abokan ciniki.
• Shigar da sunan abokin ciniki kuma danna Ƙirƙiri.
• Zaɓi abokin ciniki sannan danna alamar ƙari + kusa da Cloud Nodes.
• Shigar da serial number Cloud Node da suna, sannan danna Rajista.

Jagoran Magana na OSDP

Menene OSDP - Buɗe Ka'idar Na'urar Kulawa (OSDP) ƙa'idar sadarwa ce ta sarrafa damar shiga ta Ƙungiyar Masana'antu ta Tsaro don haɓaka haɗin kai tsakanin sarrafawa da samfuran tsaro. OSDP yana kawo ingantaccen tsaro da ingantattun ayyuka. Ya fi aminci fiye da Wiegand kuma yana goyan bayan ɓoyayyen AES-128.
Bayanin Waya na OSDP - Hudu (4) madugu murɗaɗɗen garkuwa gabaɗaya ana ba da shawarar su ci gaba da kasancewa cikakkiyar yarda da TIA-485 a matsakaicin ƙimar baud da aka goyan baya da nisan kebul. NOTE – Yana yiwuwa a sake amfani da wayoyi na Wiegand da ke akwai don OSDP, duk da haka, ta amfani da kebul mai sauƙi na masu karanta Wiegand gabaɗaya baya saduwa da shawarwarin RS485 murdaɗi.
OSDP Multi-Drop - Multi-drop yana ba ku damar ɗaukar masu karatu da yawa ta hanyar tafiyar da tsayi ɗaya na USB-conductor USB, kawar da buƙatar kunna waya ga kowace waya. NOTE - Hudu (4) shine matsakaicin adadin masu karatu kowane tashar jiragen ruwa zai iya tallafawa.
NOTE - Masu karanta Wiegand ba za su yi aiki ba lokacin da aka shigar da masu tsalle-tsalle na OSDP.

Jagoran Magana

• Shigar Wuta - Don haɗa tsarin kashe gobara ta amfani da mai kula da kofa na Red CN, koma zuwa zane-zanen wayoyi a cikin Portner Portal a www.prodatakey.com/resources
  Shirye-shirye - Bayan an haɗa mai kula da kofa na Red CN baya zuwa Cloud Node, shiga cikin software na daidaitawa kamar yadda aka umarce shi a cikin jagorar shirye-shirye. Ana samun wannan jagorar don saukewa ta hanyar Abokin Hulɗa a www.prodatakey.com/pdkio
• Dacewar Karatu - ProdataKey baya buƙatar masu karatu na mallakar mallaka. Masu kula da ƙofa suna karɓar shigarwar Wiegand, gami da masu karanta biometric da faifan maɓalli. Ana tallafawa masu karatun OSDP ta amfani da abin tsalle (duba jagorar tunani na OSDP). Tuntuɓi tallafi don cikakkun bayanai.
  Yarda da UL 294 - Duk kayan aiki dole ne su hadu da takaddun shaida na UL masu dacewa. Don shigarwar da aka jera na UL, duk hanyoyin kebul dole ne su kasance ƙasa da mita 30 (98.5')
• Lambar Sashe - RCNE
• Taimakon Fasaha na PDK
• Waya: 801.317.8802 zaɓi #2
• Imel: support@prodatakey.com
• Tushen Ilimin PDK: prodatakey.zendesk.com

View littafin mai amfani anan: prodatakey.zendesk.com
PN: RCNE
www.prodatakey.com
801.317.8802
Haƙƙin mallaka © 2021 ProdataKey Inc. Duk haƙƙin mallaka. Pdk, Pdk io, da jajayen tambura alamun kasuwanci ne na ProdataKey Inc.