Manual mai amfani na ProdataKey RCNE Red Cloud Node

ProdataKey RCNE Red Cloud Node

Ƙayyadaddun bayanai

• Haɗin kai: Matsakaicin magudanar ruwa mai cirewa
•  Yake: Tsaro na kulle ƙarfe zai iya (a cikin gida kawai)
• Zaɓuɓɓukan Sadarwa: Ethernet, raga mara waya ta WiMAC (2.4 GHz / 802.15.4)
• Nauyi: 3 lbs.
• Yarda da Muhalli: Yarda da UL 294

Umarnin Amfani da samfur

Shigarwa
Wannan sashe yana ba da umarni don shigar da ProdataKey Red Cloud Node (Ethernet).

Abubuwan Bukatun Shigarwa

• Karanta kuma ku fahimci Bayanan Tsaro da aka bayar a cikin littafin.
• Tabbatar cewa an cire haɗin wuta kafin aiki tare da samfurin

FAQ
Tambaya: Menene zaɓuɓɓukan sadarwa na Red Cloud Node (Ethernet)?
A: Red Cloud Node yana goyan bayan Ethernet da WiMAC mara waya raga tare da boye-boye AES 128-bit.

Labarai a wannan sashe
Mai amfani da Red Cloud Node (Ethernet).

Manual
Shekara 1 da suka gabata · An sabunta

Red Cloud Node
Red Cloud Node (Ethernet) -
Lambar Sashe: RCNE

Abubuwan Kunshin

Red Cloud Node (Ethernet) ya zo daidai da Ethernet da kuma samar da wutar lantarki a kan jirgin da aka gina a cikin mai sarrafawa. Akwai kuma na'urorin mara waya na zaɓi na zaɓi da PoE kuma ana iya siye su daban.

• Red Cloud Node (Ethernet)
• Jagoran Batirin Mai Sarrafa (1)
• Masu tsalle (2)
• Diodes (1)
• Kulle Maɓalli (1)
• Lakabi (2)
• Rukunin Yake (2)
• Transformer (1)
• Jagorar QuickStart (1)

Ƙayyadaddun bayanai

• Haɗin kai
• Zaɓuɓɓukan Sadarwa
• Muhalli
• Yadi
• Nauyi
• Biyayya

Haɗin kai

• Matsakaicin magudanar ruwa mai cirewa
• Shigar da Wutar Lantarki na DC-kawai
• Matsayin masana'antu 2Amp Form-C Relay

Shigar Mai Karatu

• Shigar da A
• Shigar da B
• Ƙarin wutar lantarki da haɗin ƙasa don na'urori ban da masu haɗin ƙofa

Zaɓuɓɓukan Sadarwa

• Ethernet
• WiMAC mara waya ta raga (2.4 GHz / 802.15.4)
• Rufewa: AES 128-bit
• Kewayon Mara waya: Tsawon mil 1 na gani / 450 ft. matsakaicin cikin gida

Muhalli

• Zazzabi: -20ºC ~ +60ºC / -4ºF ~ +140ºF
• Humidity: 0% -95% zafi mara ƙarfi

Yadi

• Girma (W x H x D) 10.4375" x 7.625" x 3"
• Tsaro na kulle ƙarfe zai iya (amfani na cikin gida kawai)
• Nauyi 3 lbs.

Biyayya

• Yarda da UL 294

Shigarwa

Wannan sashe na littafin yana ba da umarni don shigar da ProdataKey Red Cloud Node (Ethernet). Kafin ka fara shigarwa, karanta umarnin sosai. Tabbatar cewa kun karanta kuma kun fahimci Bayanan Tsaro.
GARGADI: Cire haɗin wuta kafin aiki tare da samfurin ProdataKey. KAR KA ɗora samfurin yayin da ake amfani da wuta. Yi amfani da wuta koyaushe a ƙarshen shigarwa bayan tabbatar da haɗin haɗin waya daidai; Wayoyin da ba daidai ba na iya haifar da lalacewa ga samfurin.

• Ƙarfi
• 12V-24V DC Input
• Farashin 14VDC2 Amp 28 Watt Class-2 samar da wutar lantarki (samar da shigar da allo)
• Yana ba da iko masu karatu da sauran kayan aikin kofa kai tsaye daga bas ɗin

Abubuwan da aka Shawarar

• Drill da madaidaicin girman rawar soja
• Phillips / Slotted screwdriver (don daidaita shugabannin dunƙule)
• Rubutun bango (2) idan suna hawa zuwa bangon bushewa
• Fensir (don yiwa alamar rami a saman hawa)
• Waya crimper / tsiri

Umarnin hawa

• Dutsen Red Cloud Node (Ethernet) a ƙofar/na'ura ko kuma a tsakiya kamar yadda zai yiwu.

Shigar da Red Cloud Node (Ethernet)

• a cikin yanki mai tsaro da tsaro.
• Waɗannan umarnin suna ba ku damar ɗaure akwatin cikin sauƙi kuma amintacce zuwa saman bango. Kafin farawa, tabbatar cewa kuna da abubuwan da ke cikin kunshin, kayan aikin, da kayan da ake buƙata don shigarwa akan saman da ya dace (watau bangon bushewa, itace).

Yi amfani da Red Cloud Node (Ethernet)

• akwatin don yiwa ramukan alama akan bango, da huda ramukan cikin saman. Idan hawa kan busasshen bango, saka anka a cikin ramukan don amintar da sukurori zuwa saman.
• Daidaita ramukan katangar zuwa ramukan da ke saman bangon sannan a ɗaura akwatin mai sarrafawa tare da sukurori don haka akwatin an ɗaure shi da bangon amintacce.

Power / Baturi

• Yin amfani da baturi wanda ya dace da ƙayyadaddun bayanai masu zuwa zai samar da aƙalla mintuna 30 na ƙarfin wariyar ajiya a yayin da aka sami asarar wutar AC:
• Nau'in Baturi Nasiha: 12 VDC 8 Ah baturin gubar-acid
• Girman Baturi Na Shawarar: 4" x 3.5" x 3" (LHW)
• Matsakaicin Girman Baturi: 6" x 5" x 4" (LHW)
• Ana ba da shawarar batir ɗin ajiya KYAU don hana gazawar tsarin a yayin asarar wutar AC. Lokacin da ba a yi amfani da baturi na baya ba, asarar ƙarfin AC zai haifar da asarar ƙarfin fitarwatage. Dole ne a shigar da batir ɗin ajiya don yin aiki da UL 294.

Ƙara baturin 12V DC 8 Ah, haɗa wayoyi daga baturin zuwa tashar baturin allon allon (hoton da ke ƙasa).

Wutar lantarki ta kan jirgin ita ce 12.0V 5A 60-watt, wadatar wutar lantarki-2. Wannan haɗin yana da polarity-m, ma'ana yana da kafaffen haɗi masu kyau da mara kyau. Daga wutar lantarki ta kan jirgin, haɗa jajayen waya 18/2 daga madaidaicin (+) DC zuwa tabbataccen (+) Cloud Node connector. Haɗa baƙar fata 18/2 waya daga kan tashar samar da wutar lantarki mara kyau (-) tashar DC zuwa madaidaicin (-) Cloud Node connector (A/1 a cikin misalan da ke sama).
NOTE: KAR KA haɗa baturin ajiyar waje har sai an gama duk wayoyi da tabbatarwa; Wayoyin da ba daidai ba na iya haifar da lalacewa ga samfurin.
Don bayani game da haɗa wasu wayoyi, kamar wayoyi masu ƙarfi zuwa makullai na ɓangare na uku, masu karatu, da sauran na'urori, duba umarnin masana'anta.

Kula da baturi, Sauyawa, & zubarwa

Red Cloud Node (Ethernet) yana da cajar baturi kuma yana kula da lafiyar batirin da kididdiga.
Bincika baturin akai-akai kuma musanya shi kawai da baturi iri ɗaya ko baturin da aka ba da shawarar ProdataKey. Zubar da batura da aka yi amfani da su bisa ga ƙa'idodin gida ko umarnin masana'anta.
MUHIMMI: Akwai haɗarin fashewar baturi idan an maye gurbin baturin ba daidai ba.

Haɗin kai

Jirgin Samaview

Haɗin Ethernet

(A) Haɗin Ethernet- Ana buƙatar haɗin Ethernet don Red Cloud Node (Ethernet) don aiki kamar yadda aka sa ran.

Wannan sashe yana bayyana ƙayyadaddun fasaha na mai haɗin Red Cloud Node (Ethernet).

Voltage karshen haši zai zama 12/24VDC.

5-Mai Haɗa Fil	Port	PIN	Bayanan kula
Fitar wutar lantarki	+	1	Madaidaicin 12VDC Fita
Fitar wutar lantarki	-	2	12VDC mara kyau
Bayanan Karatu	0	3	Bayanan shigarwa 0 / OSDP B
Bayanan Karatu	1	4	Bayanan shigarwa 1 / OSDP A
Mai karanta LED Trigger	L	5	Mai karanta LED Fitar Fitarwa

3-Mai Haɗa Fil	Port	PIN	Bayanan kula
Shigar DPS	A	1	Ƙofar Matsayi Canjawa (ko ana iya sanyawa a cikin shirye-shirye).
Shigarwar REX	B	2	Neman Fita (ko ana iya sanyawa a cikin shirye-shirye).
Kasa	-	3	Kasa

3-Mai Haɗa Fil	Port	PIN	Bayanan kula
Akan rufe	NC	1	Haɗin rufaffiyar al'ada don babban nau'i na C relay tare da jumper na zaɓi daidaitawa don fitowar tabbataccen rigar (+) ko korau (-).
Na kowa	C	2	Haɗin gama gari don babban sigar C relay.
Kullum Buɗewa	A'A	3	Kullum buɗe haɗi don babban nau'i na C relay tare da jumper na zaɓi daidaitawa don fitowar tabbataccen rigar (+) ko korau (-).

2-Mai Haɗa Fil	Port	PIN	Bayanan kula
Shigarwar Wutar Mai Sarrafa	+	1	12/24 VDC Tabbatacce
Shigarwar Wutar Mai Sarrafa	GND	2	12/24 VDC Korau

Muhimmiyar Bayani:
Ƙarfi a cikin Red Cloud Node (Ethernet)
allo mai kulawa yana da hankali ga polarity, ma'ana yana da kafaffen haɗi masu kyau da mara kyau.

Manufofin LED na Board Systems
Ana nuna alamun LED akan allon sarrafawa don WUTA, ZUCIYA, LINK, da LEDS ethernet da ke kan tashar tashar ethernet.

LED	Haske	Matsayi
WUTA	On	Hukumar tana da ƙarfi
WUTA	Kashe	Babu ikon hawa.
ZUCIYA	Walƙiya	Aiki na al'ada.
ZUCIYA	M A kan	Mahimman aikin hardware mai tsanani. Tallafin Kira.
MAHADI	M A kan	Babu haɗin kai.
MAHADI	Kashe Mai ƙarfi	Haɗin yana da kyau.
Ethernet Gudu	Lemu	Haɗin yana sadarwa a 100mbps
Ethernet Gudu	Kore	Haɗin yana sadarwa a 1000mbps/1gbps
Ethernet Ayyuka	Kashe	Babu haɗi zuwa hanyar sadarwa ta hanyar kebul.
Ethernet Ayyuka	Kore	Akwai haɗi mai aiki zuwa cibiyar sadarwa ta kebul.
SAKE	A kunne / Kashewa	Relay yana Kunnawa ko Kashe.

Waya

• Nasihar WiringDimensions
• Saita Diode
• Masu Haɗin Karatu
• Ƙofar Matsayi Sensor (DPS) Tsarin Waya
• Maglock/Fita Zane na Waya
• Tsare-tsare Tsararren Ƙofar StrikeWiring
• Zane-Safe Kofa Strike Waya

NOTE

• Domin UL-certified waya shigarwar, duk waya aiki daga a
• Red Cloud Node (Ethernet) zuwa makulli, yajin aiki, ko na'urar mai karantawa dole ne ta kasance ƙasa da ƙafa 98.5 (mita 30).
• Cire ƙarshen waya kamar yadda ake buƙata.
• Shigar da mai karantawa, kuma haɗa wayoyi, saduwa da saitunan masu karatun ku.
• Haɗa wayoyi tsakanin mai sarrafa kofa da makullai da duk wasu na'urori.

Nasihar Girman Waya

Yi amfani da mafi ƙarancin ma'aunin ma'auni 26, matsakaicin ma'auni 18, makale don wayar gaba ɗaya. Hanyoyin wayoyi za su kasance daidai da Lambar Wutar Lantarki ta Ƙasa, ANSI/NFPA 70. Bi waɗannan shawarwarin girman wayoyi.

Waya Don	Girman da aka Shawarta
Shigar da Wuta	18 ma'auni 2 conductors (18/2) waya
Mai karatu	22 ma'auni 6 conductors (22/6) waya
Yajin / Maglock	18 ma'auni 2 conductors (18/2) waya
REX	18 ma'auni 4 conductors (18/4) waya
Karatun OSDP	22 ma'auni 4 conductors Twisted-Pair (22/4) waya

Saita Diode

Diode daidaitaccen na'urar semiconductor ce mai haɗaka da aminci da ingantaccen aikin mai kula da ƙofa. Yana aiki azaman kayan aikin ƙasa, yana ba da damar kwararar halin yanzu a hanya ɗaya kawai. Lokacin da aka kira/nema/aikowa yajin ƙofa, naɗin yana aika ƙara (wanda ake kira "kickback vol).tage”) ƙasa da layi tare da kusan 50,000 volts. Ba tare da semiconductor diode ba, wannan kickback voltage zai lalata kayan sarrafawa. Lokacin da aka shigar da kyau, diode yana riƙe da kickback voltage gida a kulle.
Don kare kayan aikin ku daga bugun wutar lantarki, dole ne a shigar da diode a cikin kulle mai ƙarfin DC, a yajin aiki, tsakanin tabbatacce (+) da ƙasa (-). DC voltage ne polarized, ma'ana yana da kafaffen haɗi masu kyau da mara kyau. Dole ne a shigar da diode a cikin hanyar da aka nuna a cikin misalai: launin toka mai launin toka zuwa tabbatacce (+), baki zuwa korau ko ƙasa (-).

Masu Haɗin Karatu
Wannan sashe yana bayyana ƙayyadaddun fasaha na mai haɗin Red Cloud Node (Ethernet).

• (A) Main Reader - Babban mai karatu yana ɗora a ƙofar tare da waya 22/5 ko 22/6 da aka gudu zuwa mai kula da ƙofar. Waya mai karatu zuwa ga mai sarrafawa kamar yadda aka nuna a sama. Tabbatar duba polarity da voltage kafin kunna mai sarrafawa.
• (B) OSDP – Sanya jumper (s) don ba da damar iyawar OSDP da yawa.
• NOTE: Domin UL-certified waya shigarwar, duk waya da ke gudana daga mai sarrafa kofa zuwa kulle, yajin, ko na'urar karatu dole ne ta kasance ƙasa da ƙafa 98.5 (mita 30).
• NOTE: Yi amfani da tunani mai zuwa don haɗa mai karatu zuwa allon Kulawa.

Wiehand Readers:

• Ja: zuwa + (tabbatacce) mai haɗawa
• Baƙar fata: zuwa - (mara kyau) mai haɗawa
• Green: zuwa 0 (sifili) mai haɗawa
• Fari: zuwa 1 haši
• Brown: zuwa mai haɗin L

Masu Karatun OSDP:

• Ja: zuwa + (tabbatacce) mai haɗawa
• Baƙar fata: zuwa - (mara kyau) mai haɗawa
• Fari: zuwa 0 (sifili) mai haɗawa

Hoton Matsayin Ƙofa (DPS).

• (A) DPS: An ɗora Sensor Matsayin Ƙofa akan firam ɗin ƙofar a wurin da ake so tare da waya 22/2 da ke gudana daga DPS zuwa mai sarrafawa. (Lokacin amfani da firikwensin DPS guda biyu don ƙofofi biyu, yi musu waya a jere tare da masu gudanarwa guda biyu kawai suna komawa zuwa mai sarrafawa.)
• (B) Shigar A: Ana iya haifar da abubuwan da ke tushen ƙa'ida ta amfani da shigarwar (A) don wani abu banda DPS.
• NOTE: Lokacin da shigarwar ta sami haɗin (-) mara kyau daga mai sarrafawa, shigarwar yana jawo har sai an bar korau. Za a iya kafa doka don jawo kowane fitarwa bisa ga wannan shigar da shigar.

Maglock/Fita Hoton Waya na Na'ura

Makullin maganadisu, ko maglock, na'urar kulle ce da ta ƙunshi na'urar lantarki da farantin ƙarfe. Na'urorin kullewa na iya zama ko dai "kasa-lafiya" ko "kasa-aminci". Bangaren electromagnet na kulle yawanci an haɗa shi da firam ɗin ƙofar; wani farantin ɗamara mai ɗamara a ƙofar. Abubuwan biyu suna cikin hulɗa lokacin da aka rufe kofa. Lokacin da wutar lantarki ta sami kuzari, halin yanzu da ke wucewa ta hanyar lantarki yana sa farantin ya jawo hankalin electromagnet, yana haifar da aikin kullewa.

• NOTE: Domin UL-certified waya shigarwar, duk waya da ke gudana daga mai sarrafa kofa zuwa kulle, yajin, ko na'urar karatu dole ne ta kasance ƙasa da ƙafa 98.5 (mita 30).
• (A) Maglock: Lokacin shigar da maglock, ana buƙatar shigar da na'urar REX ta lantarki (buƙatar fita) da kuma maɓallin injin a kofa ɗaya (idan akwai gazawar lantarki) don fitarwa kyauta. Gudun haɗin waya 18/2 daga maglock zuwa mai sarrafa kofa.
• (B) REX/Na'urar Fita: An ɗora shi a wurin da ake so tare da waya 18/5 da ke gudana daga REX zuwa mai sarrafawa (waya 18/3 idan REX ba ta da wutar lantarki). Waya REX zuwa mai sarrafawa da maglock. Idan amfani da REX mai ƙarfi, gudu zuwa kowane fitarwa na 12VDC akan mai sarrafawa. (Idan ba a buƙatar rahoto a cikin tsarin, kawai kawar da waya da aka datse.)
• NOTE: Ba a ba da shawarar kunna na'urori na ɓangare na uku zuwa allon io ba. Yi amfani da keɓantaccen wutar lantarki na waje lokacin da ake haɗa na'urar fita.
• (C) Jumper: Yi amfani da ƙayyadaddun tabbataccen (+) ko korau (-) allo voltage daga (NO) da (NC). Idan mai tsalle ya kashe, gudun ba da sanda daidaitaccen “bushewar lamba” ne mai buƙatar shigarwa cikin gama gari. A cikin wannan zane, ana sanya jumper a dama (-) da fil ɗin tsakiya don sarrafa maglock.

Tsare-tsare Tsararren Ƙofa Strike Waya
Na'urar kullewa ta gazawa tana kasancewa a kulle lokacin da wutar lantarki ta ɓace. Yajin aikin lantarki yana maye gurbin kafaffen farantin fuskar yajin da aka saba amfani da shi da sandar latch. Kullum yana gabatar da aramped surface zuwa latch na kulle yana ba da damar ƙofar ta rufe da kulle kamar kafaffen yajin aiki.

• (A) Diode: Dole ne a shigar da diode ɗin da aka bayar yayin amfani da yajin aiki. Shigar da yajin aiki tare da ɗigon diode akan tabbatacce (+) da baki akan korau (-).
• MUHIMMI: DOLE ne a shigar da diode kusa da makulli kamar yadda zai yiwu. Mafi kyawun yanayin (idan zai yiwu) yana kai tsaye a ƙetare tashoshin dunƙule akan kulle. Wani zaɓi kuma shine a raba diode ɗin a layi daya (wanda aka nuna a hoton da ke sama), haɗa shi zuwa madaidaitan (+) da korau (-) wayoyi ta amfani da haɗe-haɗe na dabbar dolphin, sannan a datse wayoyi.
• (B) A'A: Buɗewa Kullum - Ana amfani da shi don yajin aiki cikin ingantaccen tsari. Haɗa mummunan (-) na yajin zuwa NO (Buɗewa Kullum) akan mai sarrafa kofa.
• (C) Jumper: Yi amfani da ƙayyadaddun tabbataccen (+) ko korau (-) allo voltage daga (NO) da (NC). Idan mai tsalle ya kashe, gudun ba da sanda daidaitaccen “bushewar lamba” ne mai buƙatar shigarwa cikin gama gari.

Zane-Safe Kofa Strike Waya Waya
Na'urar kullewa mara inganci tana buɗewa lokacin da wuta ta ɓace. Yajin aikin lantarki yana maye gurbin kafaffen farantin yajin da aka saba amfani da shi da sandar latch. Kullum yana gabatar da aramped surface zuwa latch na kulle yana ba da damar ƙofar ta rufe da kulle kamar kafaffen yajin aiki.

• (A) Diode: Dole ne a shigar da diode ɗin da aka bayar yayin amfani da yajin aiki. Shigar da yajin aiki tare da ɗigon diode akan tabbatacce (+) da baki akan korau (-).
  MUHIMMI: DOLE ne a shigar da diode kusa da makulli kamar yadda zai yiwu. Mafi kyawun yanayin (idan zai yiwu) yana kai tsaye a ƙetare tashoshi na dunƙule akan kulle (kamar yadda aka nuna a hoton farko). Wani zaɓi kuma shine a raba diode ɗin a layi daya (wanda aka nuna a hoto na biyu), haɗa shi zuwa madaidaitan (+) da korau (-) yajin wayoyi ta amfani da haɗe-haɗe na dabbar dolphin, sannan a datse wayoyi.
• (B) NC: Kullum Rufewa - Ana amfani da shi don yajin aiki a cikin tsari mai aminci. Haɗa mummunan (-) na maglock ko buga zuwa NC akan mai kula da ƙofar.
  (C) Jumper: Yi amfani da ƙayyadaddun tabbataccen (+) ko korau (-) allo voltage daga (NO) da (NC). Idan mai tsalle ya kashe, gudun ba da sanda daidaitaccen “bushewar lamba” ne mai buƙatar shigarwa cikin gama gari. A cikin wannan zane, ana sanya jumper akan mummunan (-) da fil ɗin tsakiya don sarrafa maglock.
• (A) Diode: Dole ne a shigar da diode ɗin da aka bayar yayin amfani da yajin aiki. Shigar da yajin aiki tare da ɗigon diode akan tabbatacce (+) da baki akan korau (-).
• MUHIMMI: DOLE ne a shigar da diode kusa da makulli kamar yadda zai yiwu. Mafi kyawun yanayin (idan zai yiwu) yana kai tsaye a ƙetare tashoshin dunƙule akan kulle. Wani zaɓi kuma shine a raba diode ɗin a layi daya (wanda aka nuna a hoton da ke sama), haɗa shi zuwa madaidaitan (+) da korau (-) wayoyi ta amfani da haɗe-haɗe na dabbar dolphin, sannan a datse wayoyi.
• (B) NC: Kullum Rufewa - Ana amfani dashi don buguwa a cikin tsari mai aminci. Haɗa mummunan (-) yajin zuwa NC akan mai kula da kofa.
• (C) Jumper: Yi amfani da ƙayyadaddun tabbataccen (+) ko korau (-) allo voltage daga (NO) da (NC). Idan mai tsalle ya kashe, gudun ba da sanda daidaitaccen “bushewar lamba” ne mai buƙatar shigarwa cikin gama gari.

Bayanan yarda

• Sanarwa
• Yarda da FCC
• Bayanan Bayani na UL294
• Alhaki
• Haƙƙin mallaka na hankali
• Bayanan Hardware
• Alamar kasuwanci godiya
• Bayanan Gudanarwa
• Tsaro
• zubarwa da sake yin amfani da su

Sanarwa

• ƙwararren ƙwararren mai horarwa ne zai shigar da samfurin ProdataKey.
• Za a yi amfani da samfurin ProdataKey bisa ga ƙa'idodin gida da ƙa'idodi.
• Dutsen a cikin busasshiyar wuri mai cike da iska mai kyau
• Kar a shigar da akwatin mai kula da kofa akan madaidaitan madaidaicin, saman, ko bango.
• Yi amfani da kayan aikin da suka dace kawai lokacin shigar da samfurin ProdataKey. Yin amfani da ƙarfi fiye da kima yayin hawan samfur na iya haifar da lalacewa.
• Guji fallasa samfuran ProdataKey zuwa firgita ko matsi mai nauyi.
• Kada a yi amfani da sinadarai, abubuwan da suka shafi caustic, ko masu tsabtace iska don tsaftace samfurin. Yi amfani da kyalle mai tsafta dampan haɗa shi da ruwa mai tsabta don tsaftace waje na yadi.
• Yi amfani da na'urorin haɗi kawai waɗanda suka dace da ƙayyadaddun fasaha na samfurin. Ana iya samar da waɗannan taProdataKey ko mai siyar da izini na ɓangare na uku na ProdataKey.
• Yi amfani da kayan gyara kawai da aka bayar ko shawarar ProdataKey Support ko mai sake siyar da samfur.
• Kada kayi ƙoƙarin gyara samfurin da kanka. Tuntuɓi Tallafin ProdataKey ko mai ba da izini na ProdataKey don abubuwan sabis.
• Kare igiyar wutar lantarki, kebul na Ethernet, da wayoyi masu canji daga tafiya a kai ko tsunkule, musamman inda wayoyi ke fita daga akwatin.

Yarda da FCC

Bayanin Yarda da FCC
Wannan na'urar ta bi Sashe na 15 na dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba.
2. Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
   Ana iya amfani da samfurin ba tare da sharuɗɗan lasisi ko ƙuntatawa ba a duk ƙasashen Tarayyar Turai, gami da Austria, Belgium, Denmark, Finland, Faransa, Jamus, Girka, Ireland, Luxembourg, Netherlands, Portugal, Spain, Sweden, da Ingila, kamar yadda da sauran kasashen da ba na EU ba, da suka hada da Iceland, Norway, da Switzerland.

Bayanan Bayani na UL294

• Za a shigar da samfurin ProdataKey a cikin yanki mai tsaro.
• Ana buƙatar baturin madadin don shigarwa na UL 294.
• A UL 294 da aka jera wutar lantarki kai tsaye tare da nunin “ikon ON” ana buƙatar tare da ƙimar masu zuwa: 14 VDC 2 Amp 28 wata. Za a iya ganin wutar lantarki bayan shigarwa kuma tana cikin ƙafa 6 daga panel. Ma'auni na samar da wutar lantarki yana buƙatar daidaita ma'auni na waɗanda ba UL 294 da aka jera na samar da wutar lantarki wanda ya ɓace tare da panel.
• Duk kebul ɗin da ke gudana zuwa masu kula da ƙofa dole ne ya zama ƙasa da ƙafa 98.5 (mita 30).
• Kar a haɗa wutar lantarki ta Transformer zuwa rumbun da mai kunnawa ke sarrafawa.
• Yi amfani da makullin gwangwani don tabbatar da amintattun shinge da hana tampirin.

Wayoyin da aka yi amfani da su za su kasance daidai da National Electrical Code, ANSI/NFPA 70. Sashe na 8

Siffar	Mataki
Matakin Hatsari Mai Rushewa	II
Tsaron layi	II
Matsayin Jimiri	IV
Ƙarfin jiran aiki	II

Alhaki

ProdataKey ba shi da wani garanti na kowane nau'i dangane da kayan da ke cikin wannan takaddar, gami da, amma ba'a iyakance ga, garantin ciniki da dacewa don wata manufa ba. ProdataKey ba zai zama abin dogaro ba, ko kuma alhakin lalacewa mai lalacewa ko mai lalacewa dangane da kayan aiki, aiki, ko amfani da wannan kayan. Wannan samfurin kawai za'a yi amfani dashi don manufar sa.
An ba da kulawa sosai wajen shirya wannan takarda. Da fatan za a ji daɗin sanar da Tallafin ProdataKey na duk wani kuskure ko rashi a cikin wannan takaddun. Muna maraba da ra'ayoyinku da shawarwarinku. ProdataKey ba za a iya ɗaukar alhakin kowane fasaha ko kurakurai na rubutu ba kuma yana da haƙƙin yin canje-canje ga samfur da takaddun ba tare da sanarwa ta gaba ba.

Haƙƙin mallaka na hankali
Halayen Haƙƙin mallaka - ProdataKey yana da haƙƙin mallakar fasaha da suka shafi fasaha da ke cikin samfurin da aka kwatanta a cikin wannan takaddar.

Bayanan Hardware

• Dole ne a shigar da wannan kayan aikin kuma a yi amfani da shi daidai da umarnin da aka bayar a cikin takaddun mai amfani. Wannan kayan aikin ba ya ƙunshi abubuwan da za a iya amfani da su. Hanyoyin wayoyi za su kasance daidai da Lambar Wutar Lantarki ta Ƙasa, ANSI/NFPA 70. Canje-canje na kayan aiki mara izini ko gyare-gyare za su lalata duk takaddun shaida na ƙa'idodi da yarda.
• Yi amfani da na'urorin haɗi kawai waɗanda suka dace da ƙayyadaddun fasaha na samfurin. Ana iya samar da waɗannan taProdataKey ko wani da aka amince da shi. Yi amfani da kayan gyara kawai wanda ProdataKey ke bayarwa ko shawarar.
• Bayan an shigar da tsarin kuma yana aiki da kyau, ba a buƙatar ƙarin kulawa ko gwaji.
• Kada kayi ƙoƙarin gyara samfurin da kanka. Tuntuɓi Tallafin ProdataKey ko mai ba da izini na ProdataKey don abubuwan sabis.

Alamar Kasuwanci

ProdataKey, Prodata Key, prodatakey, PDK, Prodata, alamun kasuwanci ne masu rijista ko aikace-aikacen alamar kasuwanci na Maɓallin Prodata a cikin yankuna daban-daban. Duk sauran sunayen kamfani da samfuran alamun kasuwanci ne ko alamun kasuwanci masu rijista na kamfanoni daban-daban. Izinin amfani, kwafi, gyara, da rarraba wannan software da takaddunta don kowane dalili tare da ko ba tare da kuɗi an ba da wannan damar, muddin sanarwar haƙƙin mallaka ta bayyana gabaɗaya kuma duk sanarwar haƙƙin mallaka da wannan sanarwar izini sun bayyana a cikin takaddun tallafi.

Bayanan Gudanarwa

Daidaitawar Electromagnetic (EMC)
An ƙirƙira wannan kayan aiki da gwadawa don cika ƙa'idodi masu dacewa don fitar da mitar rediyo lokacin shigar da su bisa ga umarnin kuma an yi amfani da su a wurin da aka nufa.
Kariya ga al'amuran lantarki da na lantarki lokacin shigar da su bisa ga umarnin kuma an yi amfani da su a cikin mahallin da aka nufa.

Tsaro
An shirya wannan jagorar don taimaka maka shigar da samfurin. Karanta cikin umarnin shigarwa a hankali kafin shigar da samfurin. Ajiye jagorar don shigarwa da kulawa na gaba.
Wannan samfurin ya dace da IEC/EN/UL 60950-1, Tsaron Kayan Fasahar Bayanai. Idan igiyoyin haɗin ku suna korarsu a waje, samfurin zai kasance ƙasa ko dai ta hanyar kebul na cibiyar sadarwa mai garkuwa (garkuwar murƙushe biyu) ko wata hanyar da ta dace.
Wutar lantarki da aka yi amfani da ita tare da wannan samfur za ta cika buƙatun don Tsaron Ƙarfin Ƙarƙashin Ƙarfafatage (SELV) da Iyakantaccen Wutar Wuta (LPS) bisa ga IEC/EN/UL 60950-1.

zubarwa da sake yin amfani da su
Lokacin da wannan samfurin ya kai ƙarshen rayuwarsa mai amfani, zubar da shi bisa ga dokokin gida da ƙa'idodi. Don bayani game da wurin tattarawa mafi kusa, tuntuɓi karamar hukumar ku da ke da alhakin zubar da shara. Dangane da dokokin gida, za a iya yin hukunci a kan zubar da wannan sharar ba daidai ba.

Masu Karatu masu goyan baya
Yawancin masu karatun Wiegand da OSDP sun dace da kayan aikin ProdataKey. Don bayani game da masu karanta ProdataKey, duba samfuran bayanan samfuran da ke akwai.

ProdataKey Readers
Takaddar PDK da Koyawa
Ziyarci ProdataKey accesscontrol101.com don horar da takaddun shaida da koyawa.

Garanti mai iyaka na Manufacturer
Garanti na shekara ɗaya zuwa uku akan lahani a cikin kayan aiki da aiki. Cikakkun bayanai a https://www.prodatakey.com/warranty

Tallafi / Tallace-tallace

Goyon bayan sana'a

Waya: 801.317.8802 zaɓi #2
Imel: support@prodatakey.com
Layin Tallafin Dila kai tsaye: 801.206.4086

Siyarwa:

Waya: 801.317.8802 zaɓi #1 Imel: sales@prodatakey.com

Haƙƙin mallaka
© 2022 ProdataKey, LLC. An kiyaye duk haƙƙoƙi. ProdataKey, tambarin ProdataKey, tambarin ja da sauran alamun ProdataKey mallakar ProdataKey, LLC ne kuma ana iya yin rijista. Duk sauran alamun kasuwanci mallakin masu su ne. ProdataKey ba shi da alhakin kowane kurakurai da ka iya bayyana a cikin wannan jagorar. Bayanin da ke cikin nan yana iya canzawa ba tare da sanarwa ba.
Manual Umarni na Red Cloud Node (Ethernet).

ProdataKey Door Controllers

• Ver. 1.2.0
• Ranar: Oktoba 2022

Komawa saman

• Kwanan nan viewed articles
• Red Cloud Node (Ethernet + Wireless) Manual mai amfani
• Takardar bayanan Node na Red Cloud

Sharhi

• sharhi

Da fatan za a shiga don barin sharhi.
ProdataKey, Inc. girma