Reolink CDW-B18188F-QA WLAN 11 bgn USB Module
Saukewa: CDW-B18188F-QA
TAKARDAR BAYANAI
Software:
| Abokin ciniki | Amincewa） | Kwanan wata |
| Zane | Duba | Amincewa | Sigar | Kwanan wata |
| V1.3 | 2021.11.03 |
Ƙarsheview
CDW-B18188F-QA shine WLAN 11 b/g/n kebul na USB, wanda ke goyan bayan fasalulluka da Aiki na ƙa'idodin IEEE 802.11 b/g/n. Yana goyan bayan haɗin cibiyar sadarwa mara waya mai sauri har zuwa 72.2Mbps. An tsara shi don samar da kyakkyawan aiki tare da ƙananan Ƙarfin Ƙarfafawa da haɓaka advantages na m tsarin da kuma tsada-tasiri. An yi niyya ga gasa mafi kyawun aiki, mafi kyawun aikace-aikacen Gudanar da wutar lantarki.
Siffofin
- 6-pin, Jimlar Girman 12.7×12.3×1.6mm
- guntu guda don IEEE 802.11b/g/n mai jituwa WLAN
- Cikakken maganin 802.11n don band ɗin 2.4GHz
- 72.2Mbps yana karɓar ƙimar PHY kuma 72.2Mbps suna watsa ƙimar PHY ta amfani da bandwidth 20MHz
- Mai jituwa tare da ƙayyadaddun 802.11n
- Baya mai jituwa tare da na'urorin 802.11b/g yayin aiki a cikin Interface na yanayin 802.11n
- Ya dace da USB 1.0/1.1/2.0 don Tallafin Ka'idodin WLAN
- IEEE 802.11b/g/n mai jituwa WLAN
- IEEE 802.11e QoS Haɓaka (WMM)
- 802.11i (WPA, WPA2). Buɗe, maɓallin raba, da sabis na tantance maɓalli na hikima biyu
Ƙididdigar Gabaɗaya
| Samfura | Saukewa: CDW-B18188F-QA |
| Sunan samfur | WLAN 11n USB 2.0 module |
| Manyan Chipset | Saukewa: RTL8188F-VQ1 |
| Daidaitawa | 802.11b/g/n |
| Hanyar daidaitawa | BPSK/QPSK/ 16-QAM/ 64-QAM |
| PCBA Dimension | 12.7×12.2×1.6(L×W×H)+-0.15mm |
| Ƙwaƙwalwar Mita | 2412-2472MHz don 802.11b/g/n20BW |
| Tashoshi | 802.11b/g/n-20MHz:13 |
| Gwajin Sautin Sautin | +/- 75kHz |
| Tsaro | WEP, TKIP, AES, WPA, WPA2 |
| Interface | Kebul na USB 2.0 |
| Voltage | 3.3V |
| Yanayin Aiki | -20 ~ + 60 ° C |
| Ajiya Zazzabi | -20 ~ + 70 ° C |
| Danshi | Matsakaicin 5 zuwa 90% (ba mai ɗaukar nauyi) |
Halayen Lantarki
| Siffar | Bayani | |||
| WLAN Standard | IEEE 802.11b/g/n WiFi mai yarda | |||
| Yawan Mitar | 2.400GHz ~ 2.497 GHz (2.4 GHz ISM Band) | |||
| Yawan Tashoshi | 2.4GHz: Ch1 ~ Ch13 | |||
| Modulation | 802.11b : DQPSK, DBPSK, CCK802.11 g/n : OFDM / 64-QAM, 16-QAM, QPSK, BPSK | |||
| Ƙarfin fitarwa | 802.11b / 11Mbps: 17dBm ± 2 dB @ EVM ≤ -15dB | |||
| 802.11g / 54Mbps: 14.5 dBm ± 2 dB @ EVM ≤ -25dB | ||||
| 802.11n / MCS7: 13.5 dBm ± 2 dB @ EVM ≤ -28dB | ||||
| RX hankali | Yanayin | Adadin Bayanai | Hankali (Nau'i) | Naúrar |
| 11b | 11Mbps | -85 | dBm | |
| 11 g | 54Mbps | -72 | dBm | |
| 11n HT20 | MCS7 | -70 | dBm | |
Halayen DC
| Bayani | TYP | Naúrar |
| Yanayin barci | 5 | mA |
| RX Active, HT20, MCS7 | 145 | mA |
| TX HT20, mcs7 @14dBm | 190 | mA |
| TX CCK,11Mbps @19dBm | 310 | mA |
Lura: Ana auna duk sakamakon a tashar eriya kuma VDD33 shine 3.3V
Bayanin Pin da girman PCB
| A'A. | Alama | Bayani |
| 1 | VCC | Ana buƙatar samar da wutar lantarki 3.3V |
| 2 | DM | Layukan bayanai mara kyau na USB |
| 3 | DP | Kebul tabbatacce bambancin layin bayanai |
| 4 | GND | Haɗin ƙasa |
| 5 | GND | Haɗin ƙasa |
| 6 | RF | Ana buƙatar nau'in nau'in PI na waje |
Girman PCB
Hoto na zamani
| Crystal | 40Mhz | ,MDH |
| PCBA VER | B18188F |
PCBA hoto na zahiri
Kunshin
ESD KIYAYE
CDW-B18188F-QA na'urar ESD ne (electrostatic fitarwa) na'ura mai mahimmanci kuma ana iya lalacewa ta hanyar ESD ko spike vol.tage. Ko da yake CDW-B18188F-QA yana tare da ginanniyar kewayon kariya ta ESD, da fatan za a rike da kulawa don guje wa rashin aiki na dindindin ko lalacewar aiki.
Abubuwan buƙatu ta KDB996369 D03
Jerin dokokin FCC masu aiki
Lissafin dokokin FCC waɗanda suka dace da mai watsawa na zamani. Waɗannan su ne ƙa'idodi waɗanda ke kafa ƙa'idodin aiki na musamman, ƙarfi, hayaki mai ɓarna, da aiki na yau da kullun. KADA KA lissafta bin ka'idodin radiyo na rashin niyya (Sashe na 15 Ƙarshe na B) tunda wannan ba shine sharadi na tallafin ƙirar ba wanda aka ƙaddamar ga mai ƙira. Duba kuma Sashe na 2.10 na ƙasa game da buƙatun sanar da masana'antun baƙi cewa ana buƙatar ƙarin gwaji.3
Bayani: Wannan tsarin ya cika buƙatun FCC part 15C(15.247).
Taƙaita takamaiman yanayin amfani na aiki
Bayyana sharuɗɗan amfani waɗanda suka dace da na'urar watsawa na zamani, gami da na exampko kowane iyaka akan eriya, da sauransu. Misaliample, idan an yi amfani da eriya-to-point wanda ke buƙatar rage wuta ko diyya don asarar kebul, to dole ne wannan bayanin ya kasance cikin umarnin. Idan iyakokin yanayin amfani ya ƙaru ga ƙwararrun masu amfani, to dole ne umarnin ya bayyana cewa wannan bayanin kuma ya wuce zuwa littafin jagorar mai sana'anta. Bugu da kari, ana iya buƙatar wasu bayanai, kamar riba mafi kololuwa a kowane rukunin mitar da mafi ƙarancin riba, musamman don manyan na'urori a cikin ƙungiyoyin DFS 5 GHz.
Bayani: EUT tana da eriya ta FPC, kuma eriya tana amfani da eriyar da aka haɗe ta dindindin wacce ba za ta iya maye gurbinta ba.
Hanyoyi masu iyakataccen tsari
Idan an amince da na'urar watsawa a matsayin "iyakantaccen tsari," to masana'anta suna da alhakin amincewa da mahallin masaukin da aka yi amfani da ƙayyadaddun module da shi. Dole ne mai ƙira na ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun tsarin dole ne su bayyana, duka a cikin shigar da kuma a cikin umarnin shigarwa, madadin yana nufin cewa ƙayyadaddun ƙirar ƙirar ke amfani da shi don tabbatar da cewa mai watsa shiri ya cika buƙatun da ake buƙata don gamsar da ƙayyadaddun tsarin.
Ƙaƙƙarfan masana'anta yana da sassauci don ayyana madadin hanyar sa don magance sharuɗɗan da ke iyakance amincewar farko, kamar: garkuwa, ƙaramar sigina. amplitude, buffered modulation/mashigan bayanai, ko tsarin samar da wutar lantarki. Madadin hanyar zata iya haɗawa da cewa mai ƙayyadaddun ƙirar ƙirar reviews cikakkun bayanan gwaji ko ƙirar runduna kafin ba da izinin masana'anta. Wannan ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙa'idodin RF suke yayin da ya zama dole don nuna yarda a cikin takamammen runduna. Dole ne mai ƙirar ƙirar ya bayyana yadda za a kiyaye ikon samfurin da za a shigar da na'urar watsawa a cikinsa ta yadda za a tabbatar da cikakken yarda da samfurin koyaushe. Don ƙarin runduna ban da takamaiman rundunar da aka samo asali tare da ƙayyadaddun tsari, ana buƙatar canji mai ƙyalli na Class II akan kyautar module don yin rijistar ƙarin rundunar a matsayin takamaiman mai watsa shiri wanda kuma aka amince dashi tare da tsarin.
Bayani: Module ɗin ba ƙayyadadden tsari ba ne.
Alamar ƙirar eriya
Don mai watsawa na zamani tare da ƙirar eriya, duba jagora a cikin Tambaya ta 11 na Bugawar KDB 996369 D02 FAQ - Modules don Micro-Strip Eriya da alamu. Bayanin haɗin kai zai ƙunshi don sakewar TCBview umarnin haɗin kai don abubuwa masu zuwa: shimfidar ƙirar ƙira, jerin sassan (BOM), eriya, masu haɗawa, da buƙatun keɓewa.
- Bayanin da ya haɗa da bambance-bambancen da aka halatta (misali, iyakoki na iyakoki, kauri, tsayi, faɗi, siffa(s), dielectric akai-akai, da impedance kamar yadda ya dace ga kowane nau'in eriya);
- Kowace ƙira za a yi la'akari da nau'i daban-daban (misali, tsayin eriya a cikin (s) da yawa na mita, tsayin raƙuman ruwa, da siffar eriya (alamu a lokaci) na iya rinjayar ribar eriya kuma dole ne a yi la'akari;
- Za a samar da sigogi ta hanyar ba da izinin masana'antun masauki don tsara shimfidar allon allon bugawa (PC);
- Abubuwan da suka dace ta masana'anta da ƙayyadaddun bayanai;
- Hanyoyin gwaji don tabbatar da ƙira; kuma
- Hanyoyin gwajin samarwa don tabbatar da yarda.
Mai ba da kyautar module ɗin zai ba da sanarwar cewa duk wani sabani (s) daga ƙayyadaddun sigogi na alamar eriya, kamar yadda aka bayyana ta hanyar umarnin, yana buƙatar mai samar da samfuran rundunar dole ne ya sanar da mai ba da kyautar module cewa suna son canza ƙirar eriya. A wannan yanayin, ana buƙatar aikace-aikacen canji na Class II don zama filed ta mai bayarwa, ko masana'anta na iya ɗaukar nauyi ta hanyar canji a cikin FCC ID (sabon aikace-aikacen) tsarin da aikace-aikacen canji na Class II ke biye da shi.
Bayani: Ee, Modubul ɗin tare da ƙirar eriyar alama, kuma An nuna wannan littafin jagorar ƙirar ƙira, eriya, masu haɗawa, da buƙatun keɓewa.
Abubuwan la'akari da bayyanar RF
Yana da mahimmanci ga masu ba da kyauta a sarari su bayyana yanayin bayyanar RF a sarari da ke ba da izinin masana'anta samfurin masauki don amfani da tsarin. Ana buƙatar nau'ikan umarni guda biyu don bayanin bayyanar RF: (1) zuwa ga masana'anta samfurin, don ayyana yanayin aikace-aikacen (wayar hannu, mai ɗaukuwa - xx cm daga jikin mutum); da (2) ƙarin rubutu da ake buƙata don masana'anta samfurin mai watsa shiri don samarwa don kawo ƙarshen masu amfani a cikin littattafan samfuran ƙarshen su. Idan ba a bayar da bayanan bayyanar RF da sharuɗɗan amfani ba, to ana buƙatar masana'anta samfurin mai watsa shiri don ɗaukar nauyin ƙirar ta canji a FCC ID (sabon aikace-aikace).
Bayani: Wannan tsarin ya dace da iyakokin fiddawa na FCC RF da aka tsara don yanayin da ba a sarrafa shi, Wannan kayan aikin yakamata a shigar da sarrafa shi tare da mafi ƙarancin nisa na santimita 20 tsakanin radiator da jikin ku. An ƙera wannan ƙirar don yin biyayya ga bayanin FCC, FCC ID shine: 2AYHE-2406B
Antenna
Dole ne a samar da jerin eriya da aka haɗa a cikin aikace-aikacen takaddun shaida a cikin umarnin. Don masu watsawa na yau da kullun da aka amince da su azaman ƙayyadaddun kayayyaki, duk umarnin mai sakawa ƙwararru dole ne a haɗa su azaman ɓangare na bayanin zuwa ga masana'anta samfurin. Lissafin eriya kuma za su gano nau'ikan eriya (monopole, PIFA, dipole, da sauransu.ampba a la'akari da eriya ta gaba-gaba a matsayin takamaiman "nau'in eriya")).
Don yanayi inda masana'anta samfurin ke da alhakin mai haɗin waje, misaliamptare da fil ɗin RF da ƙirar ƙirar eriya, umarnin haɗin kai zai sanar da mai sakawa cewa dole ne a yi amfani da mahaɗin eriya na musamman akan Sashe na 15 masu watsa izini da aka yi amfani da su a cikin samfurin mai masaukin baki. Masu kera na'ura za su samar da jerin masu haɗin haɗin gwiwa na musamman.
Bayani: EUT tana da eriya ta FPC, kuma eriya tana amfani da eriyar da aka haɗe ta dindindin wacce ta ke bambamta.
Alamar alama da bayanin yarda
Masu ba da tallafi suna da alhakin ci gaba da bin ƙa'idodin su ga dokokin FCC. Wannan ya haɗa da ba da shawara ga masana'antun samfur ɗin cewa suna buƙatar samar da tambarin zahiri ko e-label mai faɗi "Ya ƙunshi FCC ID" tare da ƙãre samfurinsu. Dubi Sharuɗɗa don Lakabi da Bayanin Mai amfani don Na'urorin RF - Bugawar KDB 784748.
Bayani: Tsarin rundunar da ke amfani da wannan tsarin, yakamata ya kasance yana da lakabi a fili a fili yana nuna rubutun masu zuwa: "Ya ƙunshi ID na FCC: 2AYHE-2406B, Ya ƙunshi IC: 26839-2406B"
Bayani kan hanyoyin gwaji da ƙarin buƙatun gwaji5
Ana ba da ƙarin jagora don gwada samfuran baƙi a cikin KDB Publication 996369 D04 Jagorar Haɗin Module. Ya kamata hanyoyin gwaji suyi la'akari da yanayin aiki daban-daban don mai watsawa na zamani a cikin runduna, da kuma na nau'ikan watsawa da yawa a lokaci guda ko wasu masu watsawa a cikin samfurin rundunar. Ya kamata wanda aka ba da kyauta ya ba da bayani kan yadda za a saita hanyoyin gwaji don ƙimar samfurin mai masaukin baki don yanayin aiki daban-daban don watsawa na zamani a cikin runduna, tare da yawa, na'urorin watsawa lokaci guda ko wasu masu watsawa a cikin runduna.
Masu ba da tallafi na iya haɓaka amfanin masu watsawa na zamani ta hanyar samar da hanyoyi na musamman, hanyoyi, ko umarni waɗanda ke kwaikwaya ko keɓanta haɗin kai ta hanyar kunna mai watsawa. Wannan na iya sauƙaƙa ƙudirin mai masana'anta sosai cewa ƙirar kamar yadda aka shigar a cikin runduna ta cika buƙatun FCC.
Bayani: Babban band ɗin na iya haɓaka amfanin masu watsa shirye-shiryen mu na zamani ta hanyar samar da umarni waɗanda ke kwaikwaya ko keɓance haɗin kai ta hanyar kunna mai watsawa.
Ƙarin gwaji, Sashe na 15 Ƙarƙashin Ƙaƙwalwar Sashe na B
Ya kamata wanda aka ba da kyauta ya haɗa da sanarwa cewa mai watsawa na zamani FCC ne kawai aka ba da izini don takamaiman sassa na ƙa'ida (watau, dokokin watsawa na FCC) da aka jera akan kyautar, kuma mai ƙirar samfurin yana da alhakin bin duk wasu dokokin FCC da suka shafi mai masaukin baki ba a rufe shi da kyautar ba da takaddun shaida na zamani. Idan mai bayarwa ya tallata samfuran su azaman Sashe na 15 Subpart B mai yarda (lokacin kuma ya ƙunshi da'irar dijital-radiator ba da gangan ba), to mai bayarwa zai ba da sanarwar da ke nuna cewa samfurin ƙarshe na ƙarshe yana buƙatar gwajin yarda da Sashe na 15 Subpart B tare da na'urar watsawa ta zamani. shigar.
Bayani: Module ba tare da gangan-radiator dijital circuity, don haka module ba ya bukatar wani kimanta ta FCC Part 15 Subpart B. Mai watsa shiri ya kamata a kimanta ta FCC Subpart B.
BAYANIN FCC
Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
- Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
GargadiCanje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
NOTE: An gwada wannan kayan aikin kuma an samo shi don biyan iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifar da amfani kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba a shigar da shi ba kuma aka yi amfani da shi daidai da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga radiyo ko liyafar talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:
- Sake daidaitawa ko matsar da eriya mai karɓa.
- Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
- Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
Bayanin Bayyanar Radiation na FCC:
Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa 20cm tsakanin radiyo & jikin ku.
YANZU Sanarwa
Wannan na'urar ta dace da ma'auni(s) RSS wanda ba shi da lasisin Masana'antu Kanada. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
Yakamata a shigar da wannan kayan aiki tare da yin aiki tare da ƙaramin nisa na 20 cm tsakanin radiator da jikin ku.
GYARA: Duk wani canje -canje ko gyare -gyaren da ba a amince da shi ba daga mai ba da wannan na'urar na iya ɓata ikon mai amfani don sarrafa na'urar.
Wannan na'urar dijital ta Class B ta dace da ICES-003 na Kanada. OEM dole ne ya ba da tabbacin samfurin ƙarshen ƙarshe don bin radiyo marasa niyya (Sashe na FCC 15.107 da 15.109) kafin ayyana yarda da samfurin ƙarshe zuwa Sashe na 15 na ƙa'idodin FCC. Haɗin kai cikin na'urori waɗanda ke da alaƙa kai tsaye ko a kaikaice zuwa layukan AC dole ne su ƙara tare da Canjin Izinin Class II. OEM dole ne ya bi buƙatun alamar FCC. Idan ba a iya ganin tambarin module ɗin lokacin shigar da shi, to dole ne a yi amfani da ƙarin tambarin dindindin a wajen ƙaƙƙarfan samfurin wanda ke cewa: “Ya ƙunshi jigilar jigilar FCC ID: 2AYHE-2406B”. Bugu da ƙari, ya kamata a haɗa bayanin mai zuwa akan lakabin kuma a cikin littafin mai amfani na ƙarshe: “Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa:
Tsarin yana iyakance ga shigarwa a cikin wayar hannu ko ƙayyadaddun aikace-aikace. Ana buƙatar izini dabam don duk sauran saitunan aiki, gami da daidaitawa mai ɗaukar hoto dangane da Sashe na 2.1093 da saitunan eriya daban-daban.
Za a iya amfani da na'ura ko kayayyaki kawai ba tare da ƙarin izini ba idan an gwada su kuma an ba su ƙarƙashin ƙa'idodin aiki na ƙarshen amfani da aka yi niyya, gami da ayyukan watsawa lokaci guda. Lokacin da ba a gwada su ba kuma ba a ba su ta wannan hanyar ba, ana iya buƙatar ƙarin gwaji da/ko shigar da aikace-aikacen FCC. Hanya mafi sauƙi don magance ƙarin yanayin gwaji shine samun wanda aka ba da alhakin tabbatar da takaddun shaida na aƙalla ɗaya daga cikin samfuran ya ƙaddamar da aikace-aikacen canji mai izini.
Lokacin samun mai bayarwa na module file Canjin da aka yarda ba shi da amfani ko mai yiwuwa, jagorar mai zuwa tana ba da wasu ƙarin zaɓuɓɓuka don masana'antun baƙi. Haɗe-haɗe ta amfani da kayayyaki inda za a buƙaci ƙarin gwaji da/ko shigar da aikace-aikacen FCC su ne: (A) ƙirar da aka yi amfani da ita a cikin na'urori masu buƙatar ƙarin bayanin yarda da bayyanar RF (misali, kimanta MPE ko gwajin SAR); (B) ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun kayayyaki waɗanda ba su cika duk buƙatun tsarin ba; da (C) watsawa lokaci guda don masu watsa shirye-shirye masu zaman kansu waɗanda ba a ba da su tare ba a baya.
Wannan Module cikakken yarda ne na zamani, yana iyakance ga shigarwar OEM KAWAI. Haɗin kai cikin na'urori waɗanda ke da alaƙa kai tsaye ko a kaikaice zuwa layukan AC dole ne su ƙara tare da Canjin Izinin Class II. (OEM) Mai haɗawa dole ne ya tabbatar da yarda da duk ƙarshen samfurin ya haɗa da haɗakar Module. Ƙarin ma'auni (15B) da/ko izinin kayan aiki (misali Tabbatarwa) na iya buƙatar a magance su dangane da wurin haɗin gwiwa ko batutuwan watsawa lokaci guda idan an zartar. (OEM) Ana tunatar da mai haɗawa don tabbatar da cewa waɗannan umarnin shigarwa ba za a samar da su ga mai amfani na ƙarshe ba
Bukatar alamar IC don samfurin ƙarshe na ƙarshe:
Dole ne a lakafta samfurin ƙarshe na ƙarshe a cikin fili mai zuwa tare da mai zuwa "Ya ƙunshi IC: 26839-2406B" Sunan Kasuwancin Mai watsa shiri (HMN) dole ne a nuna shi a kowane wuri a waje na samfurin rundunar ko marufi na samfur ko wallafe-wallafen samfur, wanda zai kasance tare da samfurin mai watsa shiri ko kan layi.
Wannan mai watsa rediyo [lC:26839-2406B] ya sami amincewa ta Innovation, Kimiyya da Ci gaban Tattalin Arziki Kanada don aiki tare da nau'ikan eriya da aka jera a ƙasa, tare da matsakaicin adadin halal da aka nuna. Nau'in eriya waɗanda ba a haɗa su cikin wannan jeri ba waɗanda ke da riba sama da matsakaicin riba da aka nuna don kowane nau'in da aka jera an haramta su don amfani da wannan na'urar.
| Kewayon mita | Mai ƙira | Babban riba | Impedance | Nau'in eriya |
| 2412 ~ 2462MHz | Shenzhen Be-Comfortable Technology Co.,Ltd | 4.95 dBi | 50Ω | FPC Antenna |
FAQ
Q: Shin tsarin CDW-B18188F-QA ESD yana da hankali?
A: Ee, CDW-B18188F-QA na'ura ce ta ESD. Karɓa da kulawa don guje wa rashin aiki na dindindin ko ɓarnawar aiki.
Takardu / Albarkatu
 |
Reolink CDW-B18188F-QA WLAN 11 bgn USB Module [pdf] Littafin Mai shi 2406B, 2AYHE-2406B, 2AYHE2406B, CDW-B18188F-QA WLAN 11 bgn USB Module, CDW-B18188F-QA, WLAN 11 bgn USB Module, USB Module, Module |