synapse DIM10-087-06 Mai Gudanarwa

GARGADI DA HANKALI:

• DOMIN GUJEWA WUTA, TSORO, KO MUTUWA; KASHE WUTA A KARFIN CIRCUIT BREAKER KO FUSE DA YIWA WUTA A KASHE KAFIN SHIGA!
• ANA BUKATAR GINDI MAI GIRMA DOMIN GUJEWA TSAYE D ISCHARGE WANDA ZAI IYA LALATA MASU MANA A LOKACIN SHIGA.
• Idan ba ku da tabbas game da wani ɓangare na waɗannan umarnin, tuntuɓi ma'aikacin lantarki; duk aikin ya kamata a yi ta ƙwararrun ma'aikata.
• Cire haɗin wutar lantarki a r ko fuse lokacin aiki, shigarwa, ko cire kayan aiki ko canza lamps.

JAGORAN SHIGA

BAYANI

• Matsakaicin Matsakaici Mai Ikon sarrafawa: 10mA Source/Sink
• Mitar rediyo: 2.4 GHz (IEEE 802.15.4)
• Ƙarfin fitarwa na RF: +20 dBm
• Yanayin Aiki: -40°C zuwa +80°C
• Humidity na Aiki: 10 zuwa 90%, mara taurin kai
• Max D4i Drivers: Iyakance zuwa 4 D4i LED direbobi
• Girma: 2.25"L x 2.0"WX .3"H (57 X 50.8 X 7.6 mm)

SAURARA

• DIM10-087-06 (Ana amfani da eriya ta waje)
• DIM10-087-06-F (eriya ta ciki)

HANKALI

• Dole ne a shigar da masu sarrafa DIM10-087-06 daidai da lambobi da buƙatun lantarki na ƙasa, jiha, da na gida.

HANYOYIN TSIRA

• A ƙasa akwai wasu shawarwari don cin nasara dimming ta amfani da DIM10-087-06. Ana nusar da wayoyi masu sarrafa dimming azaman Dim+ da Dim-. Sigina masu raguwa suna da madaidaicin voltagda 10V DC.
• Yi amfani da Wire mai ma'auni 18 da yawa don rigakafin hayaniya da ƙarfin halin yanzu.
• Kar a yi ƙasa da waya mai dimming; wannan sigina ce ta dawowa kuma yana da mahimmanci don dimming.
• Hanyar dimming wayoyi daga layin AC idan zai yiwu.
• Yi amfani da haɗin kai tare da masu haɗa girman da ya dace.
• Kawar da wuce haddi waya tsakanin kayan aiki; Tsawon layi zai haifar da voltagda drop.
• Matsakaicin Direbobin LED 4 akan kowane mai sarrafawa, tuntuɓi Tallafin Synapse idan ana buƙatar babban rabo.
• NOTE: Direban LED dole ne ya goyi bayan aikin DIM zuwa KASHE.

KAYAN BUKATA

• Shigar FL shimal: Lambar Sashe U.FL-LP-IN daga Hirose Electric (na DIM10-087-06 kawai)
• FL Extraction ToolSashe na lamba U.FL-LP-N-2 daga Hirose Electric (na DIM10-087-06 kawai)
• FL Connector da 14mm babban kai: Ana buƙatar kebul tare da haɗin u.FL a gefe ɗaya da kuma mai haɗin kai na 14mm na mace a ɗayan ƙarshen don tafiyar da siginar daga DIM10-087-06 ta hanyar madaidaicin gidaje zuwa eriya ta waje.
• Hardware mai hawa: (1) #4 ko M3 dunƙule da tsayawa da shawarar
• Kit ɗin Antenna: Don samun zaɓuɓɓukan eriya da fatan za a koma zuwa sabbin takaddun mu da ke kan mu website. www.synapsewireless.com/documentation.

UMARNIN SHIGA

• GARGADI: DOMIN GUJEWA WUTA, TSORO, KO MUTUWA: KASHE WUTA A WAJEN CIRCUIT BREAKER KO FUSE DA TABBATAR DA WUTA YA KASHE KAFIN WAYA!

HAUWA

• Amintacce tare da dunƙule 1 #4 (mafi girman diamita na inci .312) da tsayawa.

1. Zaɓuɓɓukan hawa: Dutsen a cikin Fixture na LED ko Troffer. Don DIM10-087-06, eriyar waje mai amfani da mai haɗin u.FL dole ne a yi amfani da shi don samar da haɗin RF zuwa cibiyar sadarwar SNAP.
2. yadin da aka saka DIM10-087-06 a wurin da ake so kuma a kiyaye shi ta amfani da #4 sized dunƙule da tsayawa a kashe ta amfani da ramin hawa dake tsakiyar allon. Kafin hawa DIM10-087-06 na dindindin, tabbatar cewa eriyar ba ta da kowane abu tsakanin inci 3. na eriyar ciki ko ta waje.

• Lura: Lokacin shigar da DIM10-087-06 cikin yadi, ana buƙatar la'akari da matsayi na eriya na ciki ko na waje da tsangwama don samar da mafi kyawun ƙarfin siginar mara waya.
• Lokacin shigar da DIM10-087-06 cikin yadi, ana buƙatar la'akari da matsayin eriya na waje da tsangwama don samar da mafi kyawun ƙarfin siginar mara waya. Kafin hawansa na dindindin, tabbatar da cewa eriya ta nuna sama ko ƙasa kai tsaye kuma ba ta da kowane ƙarfe a cikin 2 in. na eriyar (Hoto 1).

SHIGA ANTENNA

Don shigar da eriya:

1. Tabbatar cewa an kashe wutar.
2. Haɗa kebul na u.FL (Hoto 5) zuwa tashar u.FL (Hoto 4).
3. Yi amfani da kayan sakawa, PN U.FL-LP-IN, don haɗa masu haɗin. Dole ne a daidaita madaidaicin mating na masu haɗin haɗin gwiwa domin masu haɗawa su zama mated. "danna" zai tabbatar da cikakkiyar haɗin gwiwa. Kada kayi ƙoƙarin sakawa a kan matsanancin kusurwa.
4. Sanya kebul na eriya kamar yadda babu tashin hankali tsakanin kebul da mai haɗin u.FL.
5. Don cire haɗin haɗin haɗin, saka ɓangaren ƙarshen kayan aikin cirewa, U.FL-LP-N-2, ƙarƙashin flanges masu haɗawa kuma cirewa a tsaye, a cikin madaidaicin ma'aunin mahaɗin.

HANYAR HADA DA U.FL CABLE

• Ana iya haɗa eriyar u.FL zuwa DIM10-087-06 don samun iyakar haɗin RF. Abubuwan eriya da aka ba da shawarar sune:

KIT-ANTUFL18-01

• Kebul na 18” u.FL tare da eriyar kusurwar dama

KIT-ANTUFL18-02

• 18" u.FL na USB tare da madaidaiciyar eriya

KIT-ANTUFL18-03

• 18" u.FL USB tare da dama kusurwa stubby eriya

KIT-ANTUFL18-04

• Kebul na 18” u.FL tare da eriya madaidaiciya
• Da fatan za a duba takardar yanke DIM10-087-06 ko tuntuɓi tallace-tallace na Synapse don ƙarin bayani.

HANKALI DA ANTENNA

1. Tabbatar cewa an kashe wutar. Lokacin sarrafa kebul na eriya, mai fasaha dole ne ya zama ƙasa tare da madaidaiciyar madaurin ƙasa.
2. Cire murfin kura jan roba, mai wanki, da goro daga mahaɗin eriya.
3. Ƙayyade mafi kyawun wuri don matsayi na eriya na waje kuma ƙirƙirar buɗaɗɗe don hawa eriya da babban kan (Duba Hoto 6 don aunawa).
4. Ciyar da babban kan ta hanyar buɗewa a cikin kayan aiki. (Lura: Matsakaicin kauri na bangon gyarawa shine 6mm ko 0.25 inci. Wannan yana ba da damar isashen zaren a waje na kayan aiki don haɗin eriya mai kyau.)
5. Sanya mai wanki da goro a kan mai haɗin eriya kuma amintacce don daidaitawa.
6. Dunƙule a kan eriya hannun m. Matse juzu'i 1/4 tare da nau'i-nau'i na hancin allura. Kar a ƙara ƙarfi sosai ko fil ɗin RF a cikin babban kan zai tsage, haifar da rashin ingancin hanyar haɗin RF.

HANYAR SANSORA

• Lura: Matakai 14-18 don ƙara na'urori masu auna firikwensin zuwa mai sarrafa DIM10-087-06; idan ba ku haɗa na'urori masu auna sigina ku tsallake wannan sashin.
• Akwai abubuwan shigar da firikwensin guda biyu akan DIM10-087-06 wanda aka ƙera don ƙananan na'urori masu auna firikwensin (24v DC).
• Ana amfani da Input A don haɗa firikwensin A.
• Ana amfani da Input B don haɗa firikwensin B.
• Haɗa wayar wutar firikwensin zuwa AUX a kan direban LED (direban LED yana ba da firikwensin).
• Haɗa firikwensin gama gari zuwa COMMON/DALI- ko na kowa/DIM- dangane da direban LED da kake da shi.
• Haɗa firikwensin CTRL/Control waya zuwa Input A+ ko Input B+ na mai sarrafa DIM10-087-06.
• Idan kana amfani da firikwensin fiye da ɗaya, to, kwafi shigarwa kamar yadda aka bayyana a sama.
• Dole ne a saita na'urori masu auna firikwensin a cikin software kafin su yi aiki a cikin tsarin SimplySnap.

(Dubi Figures 2 da 3)

WIRING DA DIM10-087-06 MAI MULKI

• Lura: Sai dai in an fayyace, haɗin kai zuwa daidaitaccen direban Dim to Off LED da direban LED DALI 2 iri ɗaya ne.
• Haɗa fitowar 12-24VDC Aux daga direban LED zuwa DIM10-087-06.
• Haɗa ƙasa Aux daga direban LED zuwa DIM10-087-06 (Hoto 2 da 3)

HAƊA DA'IYYAR DIMMING

• Lura: Matakai 21-22 sune don haɗawa zuwa Dim Dim zuwa Kashe direban LED; idan kana amfani da direban LED DALI 2 tsallake zuwa matakai 23-24.
• Haɗa waya ta DIM akan direban LED zuwa fitowar DIM akan DIM10-087-06.
• Haɗa wayar DIM+ akan direban LED zuwa fitowar DIM+ akan DIM10-087-06. (Dubi Hoto na 2)
• Lura: Matakai 23-24 sune don haɗawa da direban LED DALI 2.
• Haɗa DALI- daga DIM10-087-06 zuwa wayar DALI-/COMMON akan direban LED.
• Haɗa DALI+ daga DIM10-087-06 zuwa Direban LED DALI+. (Dubi Hoto na 3)

KARFAFA KYAUTA DA MAI MULKI

• Bayan haɗa Mai Gudanarwa zuwa Direban LED da kowane na'urori masu auna firikwensin, tabbatar da rufe duk wayoyi marasa amfani. Kunna wutar lantarki zuwa kayan aiki. Hasken ya kamata ya kunna.
• Lura: Lokacin da aka kunna, lamps ya kamata ya kunna zuwa cikakken haske tare da siginar VDC kusan 10 akan waya ta DIM+ ta amfani da waya ta DIM azaman tunani.

LATSA

• Lura: Lokacin da aka kunna mai sarrafawa waɗannan launuka suna nuna halin yanzu.
• Ja = Babu hanyar sadarwa da aka samu (Bace Sadarwa)
• Koren Kiftawa = An samo hanyar sadarwa, Ba a saita Mai sarrafawa ba (har yanzu ba a ƙara na'urar zuwa SimplySnap ba)
• Kore = An samo hanyar sadarwa, An saita Mai sarrafawa (Aiki na yau da kullun)
• NOTE: Koma zuwa littafin mai amfani na SimplySnap don bayani kan samar da DIM10-087-06.

FCC

BAYANIN HUKUNCI DA TABBAS

• Bayanin Bayyanar RF: Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa na 20cm tsakanin radiyo da jikin ku.
• Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.
• Takaddun shaida na Masana'antu Kanada (IC): Wannan na'urar dijital ba ta wuce iyakokin Class B don hayaniya ta rediyo daga na'urar dijital da aka tsara a cikin Dokokin tsoma bakin Rediyo na Sashen Sadarwa na Kanada.
• Takaddun shaida na FCC da bayanan tsari (Amurka kawai)
• FCC Sashi na 15 Class B: Wannan na'urar ta bi sashe na 15 na dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Waɗannan na'urori bazai haifar da tsangwama mai cutarwa ba, kuma
2. Dole ne waɗannan na'urori su karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki mai cutarwa.

RADIO YAWAN KATSINA (RFI) (FCC 15.105): An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, amfani, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma ana amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

1. Sake daidaitawa ko ƙaura eriyar karɓa;
2. Ƙara haɓaka tsakanin kayan aiki da mai karɓa;
3. Haɗa kayan aiki a cikin hanyar fita a kan wani kewaye daban-daban daga abin da aka haɗa mai karɓa;
4. Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Bayanin Daidaitawa (FCC 96-208 & 95-19Synapse Wireless, Inc. ya bayyana cewa sunan samfurin "DIM10-087-06" wanda wannan sanarwar ke da alaƙa, ya cika buƙatun da Hukumar Sadarwa ta Tarayya ta kayyade kamar yadda dalla-dalla a cikin cikakkun bayanai masu zuwa:

• Sashe na 15, Ƙarshen B, don kayan aikin Class B
• FCC 96-208 kamar yadda ya shafi kwamfutoci masu zaman kansu na Class B da kayan aiki
• An gwada wannan samfurin a dakin gwaje-gwaje na waje wanda aka tabbatar da shi bisa ga ka'idodin FCC kuma an same shi ya dace da FCC, Sashe na 15, Iyakokin fitarwa. Ana kunna takaddun file kuma ana samun su daga Synapse Wireless, Inc.
• Idan FCC ID na module ɗin da ke cikin wannan shingen samfur ba a iya gani lokacin shigar da shi a cikin wata na'ura, to dole ne wajen na'urar da aka shigar da wannan samfurin a ciki dole ne ya nuna alamar da ke nuni da ruɓaɓɓen FCC ID.
• Canje-canje (FCC 15.21): Canje-canje ko gyare-gyare ga wannan kayan aikin da Synapse Wireless, Inc. ya amince da shi kai tsaye, na iya ɓata ikon mai amfani don sarrafa wannan kayan aikin.

TAMBAYOYI

• Samfura: DIM10-087-06
• Ya ƙunshi ID na FCC: U9O-SM220
• Ya ƙunshi IC: 7084A-SM220
• UL File Saukewa: E346690
• DALI-2 Certified Application Controller CE UKCA
• Tuntuɓi Synapse don Tallafawa- 877-982-7888
• Ƙaddamarwa - alamar kama-da-wane a https://www.synapsewireless.com/about/patents
• Saukewa: DIM10-087-06
• Ƙimar lodi: 12 zuwa 24VDC, +/- 10%, 700mW max
• Humidity Mai Aiki: 10 zuwa 90%, wanda ba a haɗa shi ba

Takardu / Albarkatu

synapse DIM10-087-06 Mai Gudanarwa [pdf] Jagoran Jagora 21-D08706-INS A-5, DIM10-087-06, DIM10-087-06 Mai Haɗawa Mai Sarrafa, Mai Sarrafa, Mai Sarrafa

Magana

• Manual mai amfani